| Pages:
1
..
6
7
8 |
softbeard
Hazard to Self
Posts: 69
Registered: 23-7-2013
Member Is Offline
Mood: moody
|
|
Quote: Originally posted by clearly_not_atara  | | I don't think anything can actually reverse the damage metaphosphoric acid does to glass... you can remove the phosphate, at least, with
alkali. In the future consider preparing your HPO3 in stainless steel... |
Yes, I agree. I ruined a large quartz test tube trying to boil phosphoric acid. Nothing can repair the damage.
Also, I tried to boil down concentrated phosphoric acid to HPO3 in a stainless steel dish. The result was a bubbling green mass along with
visible corrosion to the stainless dish.
You might be better off to try cast iron to boil & dehydrate your phosphoric acid acid accept some corrosion.
|
|
|
clearly_not_atara
International Hazard
Posts: 2789
Registered: 3-11-2013
Member Is Offline
Mood: Big
|
|
My bad. Steel is attacked. I believe some varieties of stainless may be more chemically resistant than others but acid-resistant stainless may not be
standard for consumer products.
I found a reference in which porcelain is used. Perhaps clay is the way to go?
http://anonym.to/http://www.science-chemistry.com/preparatio...
|
|
|
JJay
International Hazard
Posts: 3440
Registered: 15-10-2015
Member Is Offline
|
|
What is the appeal of using phosphoric acid to prepare oleum rather than simply cracking sodium bisulfate at 500 C or so?
|
|
|
Magpie
lab constructor
Posts: 5939
Registered: 1-11-2003
Location: USA
Member Is Offline
Mood: Chemistry: the subtle science.
|
|
I think the main advantage is that you can use lower temperature. Garage chemist says heating to 680-880°C is needed for NaHSO4. I have done this
using my tube furnace. With phosphoric acid/H2SO4 a bunsen burner can be used at something around the bp of H2SO4.
Incidentally my %yield at the 4X scale was approx 47%. I made another batch yesterday at scale 6X having a %yield of 50.7%.
Again, I will post some pictures if I can get this #$%& ing computer to assist me.
Attachment: 6X oleum1.odt (2MB)
This file has been downloaded 542 times
[Edited on 4-10-2017 by Magpie]
The single most important condition for a successful synthesis is good mixing - Nicodem
|
|
|
clearly_not_atara
International Hazard
Posts: 2789
Registered: 3-11-2013
Member Is Offline
Mood: Big
|
|
Melgar: while it is certainly interesting that you can buy tosyl chloride on Amazon we have a relatively large number of questions from people who
cannot simply buy things on Amazon. For them, metaphosphoric-acid -> oleum -> chlorosulfonate -> tosyl chloride is the most OTC preparation
of tosyl chloride, I think.
| Quote: Originally posted by JJay | | What is the appeal of using phosphoric acid to prepare oleum rather than simply cracking sodium bisulfate at 500 C or so? |
It's my understanding that if you combine metaphosphoric acid and concentrated sulfuric acid you can obtain a solution containing dissolved SO3 (as
polysulfates) without ever handling SO3 gas. This is useful because of the considerable risks associated with accidental release of the latter. It may
be possible to use oleum containing phosphoric acid in some applications of oleum, such as the decomposition of citric acid to acetonedicarboxylic
acid, or similar.
I'm less clear on how much such a solution has to be heated in order to produce a stream of SO3 gas. However, I suspect it is much lower than the ~400
C decomposition temperature of Na2S2O7. Since SO3 is already hard to handle it is nice not to have to handle it at 400 C! Producing SO3 (g) at lower
temperatures makes it much easier to do everything that isn't making oleum, such as the formation of Py*SO3 and other similar complexes, since these
may be unstable/char at very high temperatures.
|
|
|
Melgar
Anti-Spam Agent
Posts: 2004
Registered: 23-2-2010
Location: Connecticut
Member Is Offline
Mood: Estrified
|
|
| Quote: Originally posted by clearly_not_atara | | Melgar: while it is certainly interesting that you can buy tosyl chloride on Amazon we have a relatively large number of questions from people who
cannot simply buy things on Amazon. For them, metaphosphoric-acid -> oleum -> chlorosulfonate -> tosyl chloride is the most OTC preparation
of tosyl chloride, I think. |
Probably. I just thought it would be helpful to point that out in case anyone needed it for anything. I've known it was available for a while, but
never could come up with a reason to buy it. All the reactions that I'm aware of it being used in, also require a bunch of other stuff that's
inaccessible to me.
The first step in the process of learning something is admitting that you don't know it already.
I'm givin' the spam shields max power at full warp, but they just dinna have the power! We're gonna have to evacuate to new forum software!
|
|
|
Magpie
lab constructor
Posts: 5939
Registered: 1-11-2003
Location: USA
Member Is Offline
Mood: Chemistry: the subtle science.
|
|
I made oleum at 10X scale today, 60g as predicted. I have about 125g of oleum now at 50% SO3. Thie should be enough to make a nice batch of thionyl
chloride.
Anyone else having trouble loading pictures with Windows 10?
[Edited on 5-10-2017 by Magpie]
Attachment: 6X oleum1.odt (2MB)
This file has been downloaded 523 times
The single most important condition for a successful synthesis is good mixing - Nicodem
|
|
|
NEMO-Chemistry
International Hazard
Posts: 1559
Registered: 29-5-2016
Location: UK
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by Magpie | I made oleum at 10X scale today, 60g as predicted. I have about 125g of oleum now at 50% SO3. Thie should be enough to make a nice batch of thionyl
chloride.
Anyone else having trouble loading pictures with Windows 10?
[Edited on 5-10-2017 by Magpie] |
I upgraded to win 10, i have no end of problems including pic problems. I have no idea of the solution, in the end i simply downloaded VM ware and
installed windows 8.1 on a virtual machine. I find I use that more than win 10 now.
Win 10 is said to be much better than win 8.1, but personally i just cant get on with win 10.
This is the one i use, its free. kind of defeats the point in some ways, but might help you out
https://www.virtualbox.org/
[Edited on 8-10-2017 by NEMO-Chemistry]
|
|
|
SWIM
National Hazard
Posts: 970
Registered: 3-9-2017
Member Is Offline
|
|
| Quote: Originally posted by Magpie | I made oleum at 10X scale today, 60g as predicted. I have about 125g of oleum now at 50% SO3. Thie should be enough to make a nice batch of thionyl
chloride.
Anyone else having trouble loading pictures with Windows 10?
[Edited on 5-10-2017 by Magpie] |
About your procedure: You mentioned some serious joint leakage.
Were the joints assembled dry, or were they wetted with concentrated H2SO4?
|
|
|
Magpie
lab constructor
Posts: 5939
Registered: 1-11-2003
Location: USA
Member Is Offline
Mood: Chemistry: the subtle science.
|
|
| Quote: Originally posted by NEMO-Chemistry | | Quote: Originally posted by Magpie | I made oleum at 10X scale today, 60g as predicted. I have about 125g of oleum now at 50% SO3. Thie should be enough to make a nice batch of thionyl
chloride.
Anyone else having trouble loading pictures with Windows 10?
[Edited on 5-10-2017 by Magpie] |
I upgraded to win 10, i have no end of problems including pic problems. I have no idea of the solution, in the end i simply downloaded VM ware and
installed windows 8.1 on a virtual machine. I find I use that more than win 10 now.
Win 10 is said to be much better than win 8.1, but personally i just cant get on with win 10.
This is the one i use, its free. kind of defeats the point in some ways, but might help you out
https://www.virtualbox.org/
[Edited on 8-10-2017 by NEMO-Chemistry] |
I am having the same problem with my IOS i-pad so conclude it is related to the formum software limit of 8MGB for picture uploads. Funny I never had
this problem before. I will try again after I reduce the picture bytes.
Hi swim,
I use con H2SO4 for joint sealant for Oleum. Evenually it still leaks after it starts boiling. I will try Krytox next.
[Edited on 8-10-2017 by Magpie]
The single most important condition for a successful synthesis is good mixing - Nicodem
|
|
|
SWIM
National Hazard
Posts: 970
Registered: 3-9-2017
Member Is Offline
|
|
@Magpie
Damn.
Well, I need to rig up some kind of fume hood anyway. (Yes, I've been looking at the appropriate threads for ideas and advice)
Thanks for mentioning that leakage problem.
I'm sure it has saved some of us an unpleasant surprise.
Certainly has in my case.
|
|
|
Magpie
lab constructor
Posts: 5939
Registered: 1-11-2003
Location: USA
Member Is Offline
Mood: Chemistry: the subtle science.
|
|
picture test
This works! Used Paint to reduce size of a picture that wouldn't post before resizing.
[Edited on 9-10-2017 by Magpie]
The single most important condition for a successful synthesis is good mixing - Nicodem
|
|
|
Magpie
lab constructor
Posts: 5939
Registered: 1-11-2003
Location: USA
Member Is Offline
Mood: Chemistry: the subtle science.
|
|
| Quote: Originally posted by Magpie | I made oleum at 10X scale today, 60g as predicted. I have about 125g of oleum now at 50% SO3. Thie should be enough to make a nice batch of thionyl
chloride.
Anyone else having trouble loading pictures with Windows 10?
[Edited on 5-10-2017 by Magpie] |
Here's the picture I wanted to show showing a large amount of H2SO4 mist (smoke) being formed due to uneven cooling. I would heat with a heat gun to
clear the condenser of frozen SO3 then when not enough SO3 was condensing I would turn on the ice water. When I held the condenser water at 11°C
this smoke was nearly eliminated.
When the system is balanced only mild heating is required with the bunsen burner. No insulation of the pot or still head is needed. Under this
condition there is virtually no SO3 leakage at the joints. The smoke seen above is due to irregular heating/cooling in the condenser and is spewing
out the vacuum adapter tublature.
[Edited on 9-10-2017 by Magpie]
[Edited on 9-10-2017 by Magpie]
The single most important condition for a successful synthesis is good mixing - Nicodem
|
|
|
Magpie
lab constructor
Posts: 5939
Registered: 1-11-2003
Location: USA
Member Is Offline
Mood: Chemistry: the subtle science.
|
|
new confirm test
[Edited on 11-10-2017 by Magpie]
The single most important condition for a successful synthesis is good mixing - Nicodem
|
|
|
Magpie
lab constructor
Posts: 5939
Registered: 1-11-2003
Location: USA
Member Is Offline
Mood: Chemistry: the subtle science.
|
|
I am in the final reagent preparation stage for making thionyl chloride and chlorosulfonic acid. As I never had an assay of the oleum I made I was
skeptical that it was actually 50%. So I set out to measure its boiling point. This I determined to be 63°C which confirms a concentration of about
70%. This was very pleasing but I was skeptical so determined its mp using a salt brine coolant. This result was also very pleasing at -2°C, which
confirms about 70%. I was also considering doing a titration but this is not necessary now.
The single most important condition for a successful synthesis is good mixing - Nicodem
|
|
|
aga
Forum Drunkard
Posts: 7030
Registered: 25-3-2014
Member Is Offline
|
|
Serious stuff Magpie.
Excellent work, yet again.
From a 1673 alchemy parchment, the words/pictures deciphered as: "With the vitriolic dragon, take care to not touch it, lest it bite"
|
|
|
Keras
National Hazard
Posts: 902
Registered: 20-8-2018
Location: (48, 2)
Member Is Offline
|
|
Making oleum by pyrolysis of sodium bisulphate.
The drops of liquid SO₃ fall directly into concentrated sulphuric acid in the RBF.
Attachment: Oleum.mp4 (5.9MB)
This file has been downloaded 63 times
|
|
|
Random
International Hazard
Posts: 1120
Registered: 7-5-2010
Location: In ur closet
Member Is Offline
Mood: Energetic
|
|
Look
 
|
|
|
Alkoholvergiftung
Hazard to Others
Posts: 177
Registered: 12-7-2018
Member Is Offline
|
|
Keras. Ive read in an old journal that an reaktion of Sodiumbisulfate and Magnesiumsulfat yields SO3 it lower temperatures.
Na2SO4 + 2MgSO4 =MgNa2(SO4)2 + SO3
|
|
|
Keras
National Hazard
Posts: 902
Registered: 20-8-2018
Location: (48, 2)
Member Is Offline
|
|
Yeah, so you'd end up with a partially or completely eaten RBF. Given the price and availability of quartz RBF, I will avoid that :p
But it can be attempted in a metal can, I suppose (I have powdered glass I could use for that). No temperature is given, though. [EDIT: Correction:
1400 °C, that way too high for my blow torches anyway. The pyrolysis of sodium bisulphate is complete at 850 °C. This is caused apparently by
Na₂SO₄ being a weak base.]
[Edited on 5-10-2024 by Keras]
|
|
|
Keras
National Hazard
Posts: 902
Registered: 20-8-2018
Location: (48, 2)
Member Is Offline
|
|
| Quote: Originally posted by Alkoholvergiftung | Keras. Ive read in an old journal that an reaktion of Sodiumbisulfate and Magnesiumsulfat yields SO3 it lower temperatures.
Na2SO4 + 2MgSO4 =MgNa2(SO4)2 + SO3 |
Interesting, but I can buy kilotonnes of sodium bisulphate as pH- pool powder, whereas both sodium and magnesium sulphate are much more difficult to
find in bulk and probably more expensive. Also, an indication of the temperature would be handy.
Jedenfalls, wenn Sie diesen Artikel wiederfinden können, wurde ich natürlich interessiert. :p
|
|
|
Alkoholvergiftung
Hazard to Others
Posts: 177
Registered: 12-7-2018
Member Is Offline
|
|
https://dingler.bbaw.de/articles/mi233mi05_15.html#:~:text=J...
Dont know the patent he writes of,maybe there is an temperature for this reaction.
If you want lower temperatures make it like the old vitriol burners in the middleage. Iron III sulfate. 480C.
[Edited on 5-10-2024 by Alkoholvergiftung]
|
|
|
Alkoholvergiftung
Hazard to Others
Posts: 177
Registered: 12-7-2018
Member Is Offline
|
|
Oh and other methode would be mixing 1 part Fe2O3 powder with 2 parts magnesiumsulfat powder and heat it to 600 C. The mix will Fe2O3 should work with
Sodiumsulfate too. The weas product is Sodiumferrit if you drop it in water you get concentrated NaOH and Fe2O3 again.
|
|
|
Alkoholvergiftung
Hazard to Others
Posts: 177
Registered: 12-7-2018
Member Is Offline
|
|
Keras.
https://dingler.bbaw.de/articles/mi255mi02_8.html#:~:text=Er...
That one maybe interesting for you.
|
|
|
Texium
|
Thread Split
11-10-2024 at 14:14 |
| Pages:
1
..
6
7
8 |
![[*]](images/xpblue/default_icon.gif){kind=icon}
