| Pages:
1
2 |
wg48temp9
National Hazard
Posts: 784
Registered: 30-12-2018
Location: not so United Kingdom
Member Is Offline
|
|
That would just swirl damp air (air + the water vapor from the sieves) round them.You need a flow of fresh relatively dry air to get to the lowest
levels of water in the sieves. I believe those fryers do have vents but not flowing air as that would cool them.
I am wg48 but not on my usual pc hence the temp handle.
Thank goodness for Fleming and the fungi.
Old codger' lives matters, wear a mask and help save them.
Be aware of demagoguery, keep your frontal lobes fully engaged.
I don't know who invented mRNA vaccines but they should get a fancy medal and I hope they made a shed load of money from it.
|
|
|
artemov
Hazard to Others
Posts: 181
Registered: 22-8-2018
Member Is Offline
|
|
Quote: Originally posted by wg48temp9  |
That would just swirl damp air (air + the water vapor from the sieves) round them.You need a flow of fresh relatively dry air to get to the lowest
levels of water in the sieves. I believe those fryers do have vents but not flowing air as that would cool them. |
Would stopping and opening the door for an air exchange every half an hour or so helps, as in the case for conventional oven?
As for conventional oven, mine has a small fan built-in as well, not sure if it's drawing air in or out or just recycling the air inside.
|
|
|
S.C. Wack
bibliomaster
Posts: 2419
Registered: 7-5-2004
Location: Cornworld, Central USA
Member Is Offline
Mood: Enhanced
|
|
Dried air. For some hours to constant weight. This is how alumina is dried...or at 400C on the stovetop with stirring for the same time; 200C costs
less. It is said 3A sieves should not be heated above 260.
[Edited on 2-9-2019 by S.C. Wack]
|
|
|
wg48temp9
National Hazard
Posts: 784
Registered: 30-12-2018
Location: not so United Kingdom
Member Is Offline
|
|
| Quote: Originally posted by artemov |
Would stopping and opening the door for an air exchange every half an hour or so helps, as in the case for conventional oven?
|
Yes i think that would help significantly.
I am wg48 but not on my usual pc hence the temp handle.
Thank goodness for Fleming and the fungi.
Old codger' lives matters, wear a mask and help save them.
Be aware of demagoguery, keep your frontal lobes fully engaged.
I don't know who invented mRNA vaccines but they should get a fancy medal and I hope they made a shed load of money from it.
|
|
|
magnet
Harmless
Posts: 11
Registered: 11-5-2015
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by Magpie | | Quote: Originally posted by Pumukli | Isn't it dangerous to put a few litres of wet sieves into a regular oven at high heat? I mean explosion hazard.
The op used them to dry alcohol(s), so they not only contain water but some alcohol as well.
Experience? |
I was regenerating 3A mole sieves used to dry ethanol. I placed the apparently dry sieves in a large glass cake pan in my kitchen oven at 400F. I
then went into the next room to watch TV. After a while I heard a loud bang! I concluded that the ethanol vapor had exploded and pushed open the
spring loaded oven door, then it self-closed. I continued the drying. |
I did the same thing in my convection/toaster oven. Kaboom haha.
|
|
|
morganbw
National Hazard
Posts: 561
Registered: 23-11-2014
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by S.C. Wack |
Dried air. For some hours to constant weight. This is how alumina is dried...or at 400C on the stovetop with stirring for the same time; 200C costs
less. It is said 3A sieves should not be heated above 260.
[Edited on 2-9-2019 by S.C. Wack] |
I always respect your post. Thank you.
|
|
|
| Pages:
1
2 |
![[*]](images/xpblue/default_icon.gif){kind=icon}
