LuckyWinner - 3-2-2019 at 10:13
I need a diffuser, bubbler for mainly liquid.
im running a reaction where I need to bubble a liquid solution into another solution.
pressure is getting high so the diffuser needs to hold some pressure.
any recommendations?
needs to be chemically resistant and be able to handle a 10% sulfuric acid solution.
I already blew 2 diffuser tops off and have 2 emtpy glass tubes now.
Ubya - 3-2-2019 at 11:22
how much pressure?
can you show the diffusers you blew off? maybe a smaller diameter could work.
on ebay they sell glass acquarium co2 diffusers and ceramic ones.
RogueRose - 3-2-2019 at 14:20
what about using heat welding to attach an aquarium bubbler to a piece of vinyl tubing. I've tried high temp hot melt glue and it blew off in a ~10%
ammonia solution at about 150F.
I'm guessing other glues or epoxies would work (jb weld and such) to glue the bubble stone onto the hose.
Dr.Bob - 3-2-2019 at 16:38
What size tube diameter and how long? Do you just need the tube, one on a jointed top, or the whole bubbler assembly?