LuckyWinner
Hazard to Others
Posts: 163
Registered: 27-8-2018
Member Is Offline
|
|
How to make a Gas Liquid Diffuser, Bubbler ?
I need a diffuser, bubbler for mainly liquid.
im running a reaction where I need to bubble a liquid solution into another solution.
pressure is getting high so the diffuser needs to hold some pressure.
any recommendations?
needs to be chemically resistant and be able to handle a 10% sulfuric acid solution.
I already blew 2 diffuser tops off and have 2 emtpy glass tubes now.
|
|
|
Ubya
International Hazard
Posts: 1247
Registered: 23-11-2017
Location: Rome-Italy
Member Is Offline
Mood: I'm a maddo scientisto!!!
|
|
how much pressure?
can you show the diffusers you blew off? maybe a smaller diameter could work.
on ebay they sell glass acquarium co2 diffusers and ceramic ones.
---------------------------------------------------------------------
feel free to correct my grammar, or any mistakes i make
---------------------------------------------------------------------
|
|
|
RogueRose
International Hazard
Posts: 1594
Registered: 16-6-2014
Member Is Offline
|
|
what about using heat welding to attach an aquarium bubbler to a piece of vinyl tubing. I've tried high temp hot melt glue and it blew off in a ~10%
ammonia solution at about 150F.
I'm guessing other glues or epoxies would work (jb weld and such) to glue the bubble stone onto the hose.
|
|
|
Dr.Bob
International Hazard
Posts: 2734
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
What size tube diameter and how long? Do you just need the tube, one on a jointed top, or the whole bubbler assembly?
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
