| Pages:
1
2 |
13enigma
Harmless
Posts: 48
Registered: 4-6-2017
Member Is Offline
Mood: No Mood
|
|
in which way could diamond powder/dust be turned solid
I see online that diamond powder is sold. Which is pretty much just carbon. But how could the powder form be reverted back into solid. I realize that
it will not be "beautiful engagement ring diamonds" but I was curious behind this chemical process and physical change
|
|
|
Chemetix
Hazard to Others
Posts: 376
Registered: 23-9-2016
Location: Oztrayleeyah
Member Is Offline
Mood: Wavering between lucidity and madness
|
|
One technique can be attributed to a Ferris Bueller.
https://www.youtube.com/watch?v=O42K4EwVssQ
Otherwise the principle is sound. Extreme pressure and heat is used.
Iirc, the modern synthetic approach also uses an electrical field and some water during the process.
|
|
|
13enigma
Harmless
Posts: 48
Registered: 4-6-2017
Member Is Offline
Mood: No Mood
|
|
An electrical field and water?
Like electrolysis??
|
|
|
DFliyerz
Hazard to Others
Posts: 241
Registered: 22-12-2014
Member Is Offline
Mood: No Mood
|
|
I've heard that sodium nickelate has been used to recrystallize diamonds. http://www.sciencedirect.com/science/article/pii/09259635949...
|
|
|
13enigma
Harmless
Posts: 48
Registered: 4-6-2017
Member Is Offline
Mood: No Mood
|
|
Yeah this idea is very interesting. I saw videos of salt being crystallized into a diamond shaped figure. I was interested in doing this with the
diamonds powders I have now. I understand that carbon is different from NaCl. But the idea was there
|
|
|
Chemetix
Hazard to Others
Posts: 376
Registered: 23-9-2016
Location: Oztrayleeyah
Member Is Offline
Mood: Wavering between lucidity and madness
|
|
I understand the the electric field is used to orient the di-poles of the forming carbon lattice so to maintain the diamond structure, water I think
acts as a sort of solvent, probably for the electrons to move around bit before forming the c-c bond. The use of electrical charge is about where the
similarity to electrolysis ends.
The rest is some pretty exotic hardware of extreme hydraulic presses with heated cores and some very specifically engineered dies for the gem
formation. A backyarder $5 budget isn't going to consolidate diamond powder to any quantity.
Implosive forming using HE shaped charges or explosive lenses might get a few lumps to stick together. You might need an outer shell of, say, salt to
act as a buffer to the expansion phase of the shock; to keep the formed diamond from being ripped apart again.... just a thought bubble at this stage.
|
|
|
Melgar
Anti-Spam Agent
Posts: 2004
Registered: 23-2-2010
Location: Connecticut
Member Is Offline
Mood: Estrified
|
|
The short answer is that you can't. Unlike many other materials, you can't melt down diamonds and combine them to make larger ones. It's sort of
like wood in that respect. You can glue together sawdust to get particle board, but it won't have nearly the strength as regular wood.
edit: You can get 2-3 carat rough industrial diamonds for $10-$20 on eBay. If a diamond is below gemstone quality, its price is dramatically lower:
https://www.ebay.com/sch/i.html?_from=R40&_sacat=0&L...
Usually the auctions, as opposed to the "Buy it Now" listings are cheaper, if you don't mind waiting.
[Edited on 8/12/17 by Melgar]
The first step in the process of learning something is admitting that you don't know it already.
I'm givin' the spam shields max power at full warp, but they just dinna have the power! We're gonna have to evacuate to new forum software!
|
|
|
13enigma
Harmless
Posts: 48
Registered: 4-6-2017
Member Is Offline
Mood: No Mood
|
|
So, you're saying that a diamond powder similar, to saw dust, can not be clumped back together to form a bigger solid?
How?
I see that carbon powder like graphite can be turned back into solid. I've seen 99% Graphene crucibles too. Correct me if I'm wrong on this.
Thanks
|
|
|
ELRIC
Hazard to Others
Posts: 244
Registered: 23-2-2015
Location: Kentucky
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by 13enigma  | So, you're saying that a diamond powder similar, to saw dust, can not be clumped back together to form a bigger solid?
How?
I see that carbon powder like graphite can be turned back into solid. I've seen 99% Graphene crucibles too. Correct me if I'm wrong on this.
Thanks |
You do know that you're "carbon powder" is in fact a solid. Just like the NaCl you
likely have in you're kitchen is a solid. I'm with Melgar on this one. If it were not
so, wouldn't the value of diamonds drop like a rock (pun intended)
|
|
|
13enigma
Harmless
Posts: 48
Registered: 4-6-2017
Member Is Offline
Mood: No Mood
|
|
I know it's a solid.
I just meant that the powder would need to agglomerate into a bigger cohesive solid
|
|
|
elementcollector1
International Hazard
Posts: 2684
Registered: 28-12-2011
Location: The Known Universe
Member Is Offline
Mood: Molten
|
|
| Quote: Originally posted by 13enigma | So, you're saying that a diamond powder similar, to saw dust, can not be clumped back together to form a bigger solid?
How?
I see that carbon powder like graphite can be turned back into solid. I've seen 99% Graphene crucibles too. Correct me if I'm wrong on this.
Thanks |
Please research the difference between a sintered product and a solid one.
Elements Collected:52/87
Latest Acquired: Cl
Next in Line: Nd
|
|
|
unionised
International Hazard
Posts: 5128
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
In principle it's perfectly simple; you melt the diamond powder the let it cool down and set into a single diamond.
However the temperatures and pressures required make it practically impossible.
|
|
|
LD5050
Hazard to Others
Posts: 182
Registered: 16-1-2017
Member Is Offline
Mood: No Mood
|
|
Just curious but exactly what are the temps and pressures needed?
|
|
|
Assured Fish
Hazard to Others
Posts: 319
Registered: 31-8-2015
Location: Noo Z Land
Member Is Offline
Mood: Misanthropic
|
|
@LD5050 Straight from the wiki. https://en.wikipedia.org/wiki/Synthetic_diamond
Norton and Carborundum companies to further develop diamond synthesis. They were able to heat carbon to about 3,000 °C (5,430 °F) under a pressure
of 3.5 gigapascals (510,000 psi) for a few seconds.
I would assume the process of fusing smaller diamonds would follow along the same lines.
However i recently found the following which seems to suggest that the guys at the carnegie institute in washington manage to succeed at much lower
pressures.
The idea follows the same general anvil process however instead of using graphite as there carbon source they use methane and pass an ionized hydrogen
plasma through it.
I don't have any info as to the exact design of this process however.
http://cen.acs.org/articles/90/i11/Carbon-Goes-Deep.html
https://www.youtube.com/watch?v=A4_l3pKhaJo
|
|
|
13enigma
Harmless
Posts: 48
Registered: 4-6-2017
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by unionised | In principle it's perfectly simple; you melt the diamond powder the let it cool down and set into a single diamond.
However the temperatures and pressures required make it practically impossible. |
Yeah, in principle it sounds so simple. But so much difficult to do. I'm convinced that an amateur hobbyist chemist ad myself can't do it with regular
tools. I'm gonna need industrial equipment with safety precautions in a lab.
But I saw a video of a guy making salt crystals in diamond shape with water and some other inorganic salts. That's is not possible to do with Diamond
powders right? I'm assuming because of their difference in elemental status
|
|
|
Assured Fish
Hazard to Others
Posts: 319
Registered: 31-8-2015
Location: Noo Z Land
Member Is Offline
Mood: Misanthropic
|
|
@13enigma it fucken took you long enough.
| Quote: |
But I saw a video of a guy making salt crystals in diamond shape with water and some other inorganic salts. That's is not possible to do with Diamond
powders right? I'm assuming because of their difference in elemental status
|
You astound me with your complete lack of knowledge on the subject of chemistry.
NaCl is an ionic salt that is highly soluble in a range of solvents, therefore it can be recrystallized.
Diamonds are an allotrope of carbon.
Carbon is pretty much insoluble in just about everything (atleast i cannot think of anything it is soluble in).
Diamonds despite there appearance are not the same as crystals, it is fucken imperative that you get this through your thick skull.
If you have any legitimate passion for chemistry then i implore you to please go pick up a basic high school chemistry textbook and read it front to
back before you even attempt to think about trying to conduct any amateur chemistry.
Now let this insanity be over.
|
|
|
j_sum1
Administrator
Posts: 6333
Registered: 4-10-2014
Location: At home
Member Is Offline
Mood: Most of the ducks are in a row
|
|
Agreed, AF. This line of questioning is at the extreme basic end of chemistry and displays a fundamental misunderstanding of some elementary
principles. I have to wonder what the specific interest in diamonds is given the lack of knowledge here.
So... here are some basics. Bonding.
There exist several main mechanisms by which atoms may be bonded together. Here is an oversimplified summary.
Ionic -- a bond between a non-metalic element and a metallic element.
In this mechanism the metallic atom loses an electron and thereby becomes positively charged. At this point it is called an ion: specifically, a
cation.
The non-metallic atom gains that electron and becomes a negatively charged ion: an anion.
The positive and negative ions then stack together in a regular lattice and are held in stable configuration by electrostatic attraction. This is
known as a crystal of an ionic solid.
Metallic -- a bond between (usually identical) metal atoms.
In this mechanism all of the atoms involved lose electrons. The lost electrons are delocalised -- that is, free to move and not associated with any
one particular atom. There is of course an electrostatic force of attraction between the positive cations and the mobile electrons. The system
arranges in a stable configuration where the cations stack together in a crystal lattice and the electrons move freely through that lattice. The
phrase generally employed to describe this is, "positive ions in a sea of electrons."
Covalent -- this is bonding between non-metallic elements (although there are many exceptions). In this configuration the atoms share
electrons. In a normal atom the electrons occupy orbitals and essentially form a stable standing-wave shape centred around the nucleus of that atom.
In a covalent bond the outermost or valence electrons form an orbital that is centred around the nucleus of two atoms. This turns out to be a very
stable configuration since all the atoms involved can achieve a state where they effectively have a full outer shell.
Covalent bonding can give rise to two distinct structures: molecules and networks.
In a molecule a small number of atoms are attached to one another and the whole structure is free to operate as one unit.
In a network there is a rigid three dimensional network of bonded atoms. These forms some of the hardest and strongest materials known. Diamond is
one of these.
All this should be taken with a grain of NaCl. there are no hard and fast boundaries between any of the categories I have mentioned. But this should
at least answer your question. The situation has nothing to do with the "elemental status" of diamond. Rather it has everything to do with the type
of bonding involved. And covalent bonding is the strongest bonding there is.
I concur with AF. it is time to get out a secondary school textbook and read the first few chapters.
|
|
|
diddi
National Hazard
Posts: 723
Registered: 23-9-2014
Location: Victoria, Australia
Member Is Offline
Mood: Fluorescent
|
|
I suggest rubbing the diamonds together rapidly. the resulting heat from friction will fuse them together and maintain the crystal structure because
they are bonded along the opposing faces.
[Edited on 16-8-2017 by diddi]
Beginning construction of periodic table display
|
|
|
plastics
Hazard to Others
Posts: 141
Registered: 6-11-2009
Member Is Offline
Mood: No Mood
|
|
Stop feeding this troll
It is this sort of mind numbing tat that makes me want to switch off
Even the tongue-in-cheek replies of my more erudite colleagues are a massive turn off
|
|
|
physics inclination
Harmless
Posts: 40
Registered: 24-6-2017
Location: the field of physics
Member Is Offline
Mood: thermodynamically stable
|
|
This is kind of a joke/"out-there" suggestion, but what if you tried detonating a shaped charge (no copper penetrator or anything, just explosive)
onto graphite or diamond powder, where the "focus" of the blast is right on the powder?
That would be 1) certainly able to generate pressures high enough, or probably even higher than a solid lab apparatus and 2) somewhat accessible and
relevant to users of this forum 
edit: also keep in mind that this would (if it works at all) only produce lower-quality "sintered" diamond crystals rather than high-quality
high-strength "cast" or "forged" diamond crystals--to use the analogy to how metal crystalline structures form differently depending on how they're
made
[Edited on 8-16-2017 by physics inclination]
[Edited on 8-16-2017 by physics inclination]
|
|
|
phlogiston
International Hazard
Posts: 1379
Registered: 26-4-2008
Location: Neon Thorium Erbium Lanthanum Neodymium Sulphur
Member Is Offline
Mood: pyrophoric
|
|
physics inclination, that does actually work. It has been the subject of serious research, no joke.
One can use explosives to make (very, very small) diamonds. Oxygen-deficient explosions of TNT have been shown to produce 'nano-diamonds' (just 10's
of nm in size, but definately diamond phase).
I am too lazy to look up the papers right now, but no doubt google will easily find them.
Did mythbusters not also have an episode where they made diamonds large enough to be visible with explosive compression?
-----
"If a rocket goes up, who cares where it comes down, that's not my concern said Wernher von Braun" - Tom Lehrer |
|
|
physics inclination
Harmless
Posts: 40
Registered: 24-6-2017
Location: the field of physics
Member Is Offline
Mood: thermodynamically stable
|
|
| Quote: Originally posted by phlogiston |
Did mythbusters not also have an episode where they made diamonds large enough to be visible with explosive compression? |
Found it yes 
https://www.youtube.com/watch?v=0mWQUvxcANE
|
|
|
clearly_not_atara
International Hazard
Posts: 2799
Registered: 3-11-2013
Member Is Offline
Mood: Big
|
|
Could you do CVD onto a surface covered in diamond powder and thereby bind them together?
|
|
|
j_sum1
Administrator
Posts: 6333
Registered: 4-10-2014
Location: At home
Member Is Offline
Mood: Most of the ducks are in a row
|
|
If you are going to sinter diamond particles then you have an alignment problem. You might get a cohesive mass (if you are clever) but you won't get
a single crystal unless you are above recrystallisation temperature for long enough time. IOW, diamond dust is going to be a poor starting material
if you want large diamonds.
|
|
|
elementcollector1
International Hazard
Posts: 2684
Registered: 28-12-2011
Location: The Known Universe
Member Is Offline
Mood: Molten
|
|
Come to think of it, why not just mix the diamond dust with a resin binder and create a 'druzy' that way? It'd still be gorgeous, and you wouldn't
have to worry about high-tech methods to improve the diamonds' size.
Elements Collected:52/87
Latest Acquired: Cl
Next in Line: Nd
|
|
|
| Pages:
1
2 |
![[*]](images/xpblue/default_icon.gif){kind=icon}
