RogueRose
International Hazard
Posts: 1590
Registered: 16-6-2014
Member Is Offline
|
|
Bubble CO2 through Ammoium Hydroxide - Make Ammonium BiCarb?
If CO2 is bubbled through a solution of ammonium hydroxide, will it produce ammonium bicarb? The temp would be best if kept under 70F - if this
process works. The equation for bicarb is NH3 + CO2 + H2O
|
|
|
j_sum1
Administrator
Posts: 6256
Registered: 4-10-2014
Location: Unmoved
Member Is Offline
Mood: Organised
|
|
Research the Solvay process and be amazed!
[Edit]
I did not intend that to sound so flippant. The solvay process is truly genius. The process you have described is one step in it.
[Edited on 18-10-2016 by j_sum1]
|
|
|
AJKOER
Radically Dubious
Posts: 3026
Registered: 7-5-2011
Member Is Offline
Mood: No Mood
|
|
You could try adding NH3 gas or ammonia water to cold aqueous Mg(HCO3)2. Filter or just let settle out the white Mg(OH)2 precipitate.
2 NH3 + 2 H2O + Mg(HCO3)2 → 2 NH4HCO3 + Mg(OH)2 (s)
I have prepared Mg(HCO3)2 by adding NaHCO3 to cold aqueous MgSO4, and freezing out the Na2SO4. Magnesium bicarbonate is heat sensitive, so if you heat
this mix, the product is:
2NaHCO3 + MgSO4 → Na2SO4 + Mg(OH)2 + 2CO2
indicating the decomposition of the magnesium bicarbonate. My experience is also that Mg(HCO3)2 decomposes on standing in a day or so. So use quickly.
[Edit] It is my speculation that the instability of the Mg(HCO3)2 is related to exposure to air or dissolved oxygen (in the water used to dissolve the
NaHCO3 or MgSO4), with a small presence of a transition metal like Fe or Mn (or possibly even the Mg itself from photo reactivity of the
oxide/hydroxide?), pre-boiling and cooling the distilled water may reduce dissolved oxygen exposure. This may prolong the shelf life of both the
magnesium and ammonium bicarbonate (cold storage in any event).
[Edited on 18-10-2016 by AJKOER]
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
