Refinery
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 371
Registered: 17-2-2014
Member Is Offline
Mood: Still
|
|
How to concentrate formic acid?
How can formic acid be concentrated? Its bp is same as water. Distilling from H2SO4? Drying with something that doesnt react or absorb the HCOOH?
|
|
chornedsnorkack
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 552
Registered: 16-2-2012
Member Is Offline
Mood: No Mood
|
|
1) It forms a high boiling azeotrope with water (unlike acetic acid). Boiling point 107,5 Celsius, 77,6 % formic acid by weight. Making about 57 %
formic acid by mole.
https://onlinelibrary.wiley.com/doi/pdf/10.1002/14356007.a12...
2) Once you are at the boiling point extremum, it is not generally a freezing point extremum. Formic acid forms a simple eutectic, which is for some
reason given in mole % as 41 %. 57 % by mole (the azeotrope) should have a freezing point somewhere between -28 and -23, though formic acid has a
tendency to supercool.
|
|
Tsjerk
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3026
Registered: 20-4-2005
Location: Netherlands
Member Is Offline
Mood: Mood
|
|
Article on producing 99% formic acid from 85%.
Attachment: ritter1935.pdf (260kB) This file has been downloaded 472 times
|
|
unionised
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 5109
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
Beware of trying to use H2SO4 as a dessicant for HCOOH
You might do better than you hoped and dehydrate it to the remarkably toxic, carbon monoxide.
|
|
chornedsnorkack
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 552
Registered: 16-2-2012
Member Is Offline
Mood: No Mood
|
|
Formic acid is itself unstable for two different decay reactions:
HCOOH <-> CO+H2O
HCOOH -> CO2+H2
At 25 Celsius, the first reaction would come into equilibrium with 1 bar CO in headspace at about 3 % formic acid, but is slow. 99 % formic acid
decomposes less than 0,1 % in 3 months... but this would be enough to build up carbon monoxide in headspace of a bottle left with 100 % formic acid
for months.
Would it be better to store 100 % formic acid as a solid, under 8 Celsius?
|
|
Cou
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 958
Registered: 16-5-2013
Member Is Offline
Mood: Mad Scientist
|
|
Anhydrous copper (ii) sulfate is a suitable drying agent for carboxylic acids. Add anhydrous CuSO4 until new additions no longer clump together, then
distill under reduced pressure (formic acid decomposes at high temperatures)
[Edited on 7-22-2020 by Cou]
|
|
unionised
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 5109
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
If you can do a reduced pressure distillation, you can break the azeotrope that way .
The azeotropic concentration is pressure dependent.
|
|
Fery
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1003
Registered: 27-8-2019
Location: Czechoslovakia
Member Is Offline
|
|
unionised is right, IIRC distillation at 0,2-0,3 atm produces 85% acid from 77% azeotrope which boils at 1 atm (higher vacuum is not helpful)
[Edited on 24-7-2020 by Fery]
|
|
foreign maple
Harmless
Posts: 26
Registered: 14-12-2017
Location: Somewhere up north
Member Is Offline
Mood: I'm fine
|
|
possibly molecular sieves
[Edited on 27-10-2020 by foreign maple]
|
|
Cou
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 958
Registered: 16-5-2013
Member Is Offline
Mood: Mad Scientist
|
|
Molecular sieves are not compatible with acids
|
|