marethyu
Harmless
Posts: 19
Registered: 16-4-2018
Member Is Offline
Mood: No Mood
|
|
Anyone looking for glass ware, heating mantles, stirrers, pumps near Racine WI
There is this little company in Racine WI that pulls in a TON of used lab equipment, its all name brand stuff, Pyrex, Ace glass, Wilmad, Schott Duran.
I found them when I went to buy stuff from them and they sell mostly used and a little new stuff and everything sells for around 25% or less of
retail. They have everything from simple Erlenmeyer, beakers, round bottom flasks, and reagent bottles to more complex stuff like vacuum jacketed
jointed still heads, simple condenser, pipettes, reaction vessels. They've also got stuff like high vacuum pumps, peristaltic pumps, dewars, a little
bit of everything. It's all fairly cheap, even cheaper than a lot of the Chinese stuff and they got me geared up for amateur chemistry. If you want
to come check some stuff out of have any questions on what they have just message me.
|
|
marethyu
Harmless
Posts: 19
Registered: 16-4-2018
Member Is Offline
Mood: No Mood
|
|
There was some interest in my previous post so I am making a more specific one. The company also sells. Buchi Rotavapors, Vacuum pumps, Overhead and
magnetic stirrers, analytical balance, RB flasks, Still heads, Stoppers, Glass joint Adapters, Chromatography, Lab ovens, Ect. Almost all basic lab
equipment and a lot of specialty stuff too. Most used stuff is priced right around 25% of retail and came out of closed labs that have "decontaminated
the items. The stuff they have in LARGE volumes are Erlenmeyer flasks, RB flasks, adapters/stoppers, distillation accessorizes, chromatography colums
from around 25mL to 200L, media bottles, volumetric flasks, and vials. They have new vials, test tubes, pipette tips, well plates, gloves, pipettes,
and a ton of other disposables. Some of the prices on the higher value stuff is a full Buchi Rotavapor with glassware for ~$1300 but we may not have
the evaporating and receiving flasks in the sizes you want. Vacuum pumps $200-$600 depending on the size there are some smaller diaphragm and rotary
vane pumps and some extremely high vacuum high flow pumps as well rotary vane pumps as well. Some Glascol heating mantles of various sizes with chords
and Variacs ~$200 depending on size and less if you don't want a power supply. Hotplate stirrers and Analytical scales are ~$500-$100 depending on
size/model. if you have any questions about if we have a particular item post it in the thread so others can see and questions about availability and
if you want to order, U2U me. Here are some pics
|
|
marethyu
Harmless
Posts: 19
Registered: 16-4-2018
Member Is Offline
Mood: No Mood
|
|
I can ship anywhere in the US here is a link to pics https://drive.google.com/drive/folders/1KSY6ylk0Ck7sLLHx_EskYi6hXcZkOI9w?usp=sharing
|
|
marethyu
Harmless
Posts: 19
Registered: 16-4-2018
Member Is Offline
Mood: No Mood
|
|
glass
|
|
lordcookies24
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 78
Registered: 2-1-2019
Location: pluto
Member Is Offline
Mood: curious
|
|
You got Soxhlet extractors?
|
|
marethyu
Harmless
Posts: 19
Registered: 16-4-2018
Member Is Offline
Mood: No Mood
|
|
I believe so, they are about $70
|
|
PirateDocBrown
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 570
Registered: 27-11-2016
Location: Minnesota
Member Is Offline
Mood: No Mood
|
|
How much for the Corning hotplate/stirrer?
How about a 500 ml heating mantle?
Phlogiston manufacturer/supplier.
For all your phlogiston needs.
|
|
Fleaker
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1252
Registered: 19-6-2005
Member Is Offline
Mood: nucleophilic
|
|
Got any 50 L, 72 L and 100 L flasks?
Neither flask nor beaker.
"Kid, you don't even know just what you don't know. "
--The Dark Lord Sauron
|
|
marethyu
Harmless
Posts: 19
Registered: 16-4-2018
Member Is Offline
Mood: No Mood
|
|
The largest round bottom they have in stock is a 20L with a flange for $250
|
|
marethyu
Harmless
Posts: 19
Registered: 16-4-2018
Member Is Offline
Mood: No Mood
|
|
The hotplate stirrer is $180 and 500mL heating mantles are $40 a piece the and I believe they have Variacs to control them for $50
|
|
Dr.Bob
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2690
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
I just bought a few items via marethyu, to fill in some gaps I had, and received them as described, all well packed and intact. So I am happy with
his services, as well as the company that he has found the materials at. So if there are things or equipment that I don't have, which is much now,
you might try marethyu. Having multiply sources to buy from is always a good thing.
|
|
marethyu
Harmless
Posts: 19
Registered: 16-4-2018
Member Is Offline
Mood: No Mood
|
|
Also if anyone is interested, I can sell chipped glassware that is still fully functional (very minor chips or chips on the outside of joints) for
very very cheap like media bottles rb flasks filter flasks and condensers. like a three necked two liter round bottom flask for $15 or 14/20 round
bottoms for ~$2.50 each and media bottles with very small chips on the inner rims for $5 for a 2000mL plus shipping if anyone is interested. There is
not as much stuff like that but they have it and are willing to let it go at really low prices.
|
|
Dr.Bob
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2690
Registered: 26-1-2011
Location: USA - NC
Member Is Offline
Mood: No Mood
|
|
I can say that were I work in a lab, virtually half or more of all glassware has one or more chips in it, with no issues. We use it all daily, and
it gets wear to it, scratched bottoms from stirbars over the years, chips on edges, and etching from some reactions. If there are actual star cracks
or real cracks, we typically either toss it, or relegate it to minor use, not under vacuum, but I used a few beakers with minor cracks in them for
years for cleaning small parts in with acetone, and they did not even leak. So when I see how afraid people are of minor chips or broken off drip
tubes, I have to sign, as that is most of what I use daily, and it works fine.
|
|
karlosĀ³
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1520
Registered: 10-1-2011
Location: yes!
Member Is Offline
Mood: oxazolidinic 8)
|
|
Quote: Originally posted by Dr.Bob ![](images/xpblue/lastpost.gif) | I can say that were I work in a lab, virtually half or more of all glassware has one or more chips in it, with no issues. We use it all daily, and
it gets wear to it, scratched bottoms from stirbars over the years, chips on edges, and etching from some reactions. If there are actual star cracks
or real cracks, we typically either toss it, or relegate it to minor use, not under vacuum, but I used a few beakers with minor cracks in them for
years for cleaning small parts in with acetone, and they did not even leak. So when I see how afraid people are of minor chips or broken off drip
tubes, I have to sign, as that is most of what I use daily, and it works fine. |
Agreed!
I don't throw something away unless it has a real bad star crack.
I just send a friend a 1l sep funnel who has a crack in its upper half, and he was really thankful for that.
Stuff like that, I don't want to waste anything.
Gov-paid labs have to do that, but we don't have their budgets.
|
|
marethyu
Harmless
Posts: 19
Registered: 16-4-2018
Member Is Offline
Mood: No Mood
|
|
The company straight up has a specialized machine to break lab glass that has any imperfection except extremely high value stuff because they don't
want to sell it and they get so much of it over the years.
|
|
acidbaby
Harmless
Posts: 4
Registered: 7-5-2019
Member Is Offline
|
|
Do you keep a list of their inventory as you go through it?
|
|
marethyu
Harmless
Posts: 19
Registered: 16-4-2018
Member Is Offline
Mood: No Mood
|
|
I don't currently have a hard list but i've got a fairly good handle on what they do and do not have in stock since I'm in and out so much. I could
probably make a list of the basic stuff they have in stock, as well as prices similarly to Dr. Bob, did. I could also probably put together a document
of chipped stuff and have them set it aside instead of destroying it. what on particular are you looking for.
|
|
marethyu
Harmless
Posts: 19
Registered: 16-4-2018
Member Is Offline
Mood: No Mood
|
|
Here is there Ebay store with more specific items on it but If you go through me I can get you at least 10% off what the store price is. I also
attached a document with an inventory and price list
https://www.ebay.com/str/americanlabindustrysurplus
Attachment: 2019 Glass Pricing doc.xlsx (12kB) This file has been downloaded 306 times
|
|
marethyu
Harmless
Posts: 19
Registered: 16-4-2018
Member Is Offline
Mood: No Mood
|
|
Damaged Glass inventory
I also put together a damaged glass inventory that I will update as I find more damaged glass, This isn't everything we have feel free to ask about
damaged things not on the list and everything is still functional and in ok shape. I will email you photos of an item if you would like everything is
priced around 10% or less of retail. https://docs.google.com/spreadsheets/d/1nyZop11OsrI3hYNWfFUZysFqx6BmGhawJLGZBFBCuWw/edit?usp=sharing
|
|
Loptr
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1348
Registered: 20-5-2014
Location: USA
Member Is Offline
Mood: Grateful
|
|
Happen to have any UV lamps for TLC work? 254nm, but ines that can do both short and long wave might be nice.
"Question everything generally thought to be obvious." - Dieter Rams
|
|
marethyu
Harmless
Posts: 19
Registered: 16-4-2018
Member Is Offline
Mood: No Mood
|
|
They have a hand help Entela UV lamp 6-watt with 254nm and 365 mm wavelengths model number 95-0007-05 for $70
|
|