vmelkon
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 669
Registered: 25-11-2011
Location: Canada
Member Is Offline
Mood: autoerotic asphyxiation
|
|
Motherboard RAM plastic, IDE plastic, PCI plastic
Hello, I desoldiered some motherboards.
I placed the RAM plastic (the sockets where you insert your RAM modules).
IDE plastic (the sockets where you insert your IDE cables).
PCI and PCI-ex slots.
I added them to HCl, 37% (10 M).
It looks like some of the plastic liquefied.
Does anyone know what these plastics are? Is it nylon?
The idea was to have the HCl react slowly with the nickel, tin, copper.
Signature ==== Is this my youtube page? https://www.youtube.com/watch?v=tA5PYtul5aU
We must attach the electrodes of knowledge to the nipples of ignorance and give a few good jolts.
Yes my evolutionary friends. We are all homos here.
|
|
Twospoons
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1314
Registered: 26-7-2004
Location: Middle Earth
Member Is Offline
Mood: A trace of hope...
|
|
LCP is the likely material (liquid crystal polymer). It is rigid and good for moulding accurate detail.
Helicopter: "helico" -> spiral, "pter" -> with wings
|
|
DavidJR
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 908
Registered: 1-1-2018
Location: Scotland
Member Is Offline
Mood: Tired
|
|
Nylon does indeed dissolve in concentrated HCl, and it would not surprise me at all if it was in fact nylon that is used in the connectors.
|
|
Ubya
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1247
Registered: 23-11-2017
Location: Rome-Italy
Member Is Offline
Mood: I'm a maddo scientisto!!!
|
|
Quote: Originally posted by vmelkon ![](images/xpblue/lastpost.gif) | Hello, I desoldiered some motherboards.
I placed the RAM plastic (the sockets where you insert your RAM modules).
IDE plastic (the sockets where you insert your IDE cables).
PCI and PCI-ex slots.
I added them to HCl, 37% (10 M).
It looks like some of the plastic liquefied.
Does anyone know what these plastics are? Is it nylon?
The idea was to have the HCl react slowly with the nickel, tin, copper. |
If you just had a few motherboards it was wiser to remove the pins from the plastic, even if nothing happened to the plastic you still have to remove
the plastic from the gold particles before adding acqua Regia (or anything that dissolves gold)
---------------------------------------------------------------------
feel free to correct my grammar, or any mistakes i make
---------------------------------------------------------------------
|
|
vmelkon
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 669
Registered: 25-11-2011
Location: Canada
Member Is Offline
Mood: autoerotic asphyxiation
|
|
Quote: Originally posted by Ubya ![](images/xpblue/lastpost.gif) | If you just had a few motherboards it was wiser to remove the pins from the plastic, even if nothing happened to the plastic you still have to remove
the plastic from the gold particles before adding aqua Regia (or anything that dissolves gold) |
But there are too many pins. I have a bunch of DIMM slots. Each has 190 to 200 pins. PCI slots have a lot as well. Maybe 100. There are AGP slots and
PCI-Ex. There are USB headers and other headers. I also have HDD and cables like VGA, USB.
I have only seen people process RAM and they snip the connector part with a metal cutting scissor. Each RAM takes 10 sec to cut. That is easy.
Signature ==== Is this my youtube page? https://www.youtube.com/watch?v=tA5PYtul5aU
We must attach the electrodes of knowledge to the nipples of ignorance and give a few good jolts.
Yes my evolutionary friends. We are all homos here.
|
|
Ubya
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1247
Registered: 23-11-2017
Location: Rome-Italy
Member Is Offline
Mood: I'm a maddo scientisto!!!
|
|
Quote: Originally posted by vmelkon ![](images/xpblue/lastpost.gif) | Quote: Originally posted by Ubya ![](images/xpblue/lastpost.gif) | If you just had a few motherboards it was wiser to remove the pins from the plastic, even if nothing happened to the plastic you still have to remove
the plastic from the gold particles before adding aqua Regia (or anything that dissolves gold) |
But there are too many pins. I have a bunch of DIMM slots. Each has 190 to 200 pins. PCI slots have a lot as well. Maybe 100. There are AGP slots and
PCI-Ex. There are USB headers and other headers. I also have HDD and cables like VGA, USB.
I have only seen people process RAM and they snip the connector part with a metal cutting scissor. Each RAM takes 10 sec to cut. That is easy.
|
i know they are lots of pins, but with a pair of pliers and the right technique you can remove all the pins from each connector of a motherboard in 10
minutes (i dismantled 2 motherboards and removed all the pins this way)
---------------------------------------------------------------------
feel free to correct my grammar, or any mistakes i make
---------------------------------------------------------------------
|
|
RogueRose
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1590
Registered: 16-6-2014
Member Is Offline
|
|
I think the PCI, PCIe and RAM slots are usually glass reinforced nylon, PA6. I've also seen some of these parts semi dissolve in HCl.
As far as dissolving the pins, you should really take a look at the amount of gold that is used to cover these pins as it is a VERY small amount, MUCH
less than what is on PCI cards or RAM cards. The pins seem to have about 5% total coverage of the entire pin in gold and it is much thinner than the
plating on the cards. IIRC, these pins might also be a phosphor bronze that i've been told really messes up the extraction of gold.
The amount of HCl needed to dissolve all those pins is a lot compared to the amount of gold extracted. I'd venture a guess that you'd spend many
times the value of the gold in HCl alone when working on these types of pins.
|
|
Twospoons
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1314
Registered: 26-7-2004
Location: Middle Earth
Member Is Offline
Mood: A trace of hope...
|
|
https://www.digikey.co.nz/products/en/connectors-interconnec...
A representative collection of PCIE connectors. Some are glass filled nylon, some are LCP, some use phosphor bronze. Most of them have bugger all gold
(thats what 'Flash' means).
Look at the drawings for a particular part - the materials will be specified somewhere in a note.
[Edited on 12-6-2019 by Twospoons]
Helicopter: "helico" -> spiral, "pter" -> with wings
|
|