ChemistryForever
Hazard to Self
Posts: 64
Registered: 6-12-2018
Member Is Offline
|
|
KOH
Why cannot i find any KOH over 90% ?
|
|
|
Sulaiman
International Hazard
Posts: 3721
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
Potassium hydroxide is difficult = expensive to totally de-hydrate,
and very hygroscopic, so difficult to keep dry,
most of the 10% is water, with maybe up to 1% carbonate.
https://en.wikipedia.org/wiki/Potassium_hydroxide
My potassium hydroxide is supposed to be 97% 
but it is no more useful than 90% KOH 
as the actual concentration of 90% or 97% is unknown,
solutions of either will need titration if accuracy is required,
so go for the much cheaper 90% KOH.
[Edited on 26-12-2018 by Sulaiman]
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
|
AJKOER
Radically Dubious
Posts: 3026
Registered: 7-5-2011
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by AJKOER  | .....
At the expense of a piece of glassware (attacked), I learned that a slurry of Ag2O will react with NaCl (or KCl) forming a white precipitate of AgCl
and aqueous NaOH (or correspondingly, KOH). Likely reactions:
Ag2O + H2O = 2 AgOH
AgOH + KCl = AgCl(s) + KOH
Treating cold dilute KOH with Cl2 forms KCl and KClO, as noted above.
If one adds Ag2O/AgOH, to NaClO, the reported product is AgCl precipitate and AgClO3. In other words, the silver hypochlorite disproportionates to the
insoluble chloride and chlorate.
[Edited on 8-8-2017 by AJKOER] |
So apparently, 2 KCl + Ag2O + H2O leads to 2 KOH and insoluble 2 AgCl (which can be recycled)!
[Edited on 26-12-2018 by AJKOER]
|
|
|
Sulaiman
International Hazard
Posts: 3721
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
So how do you economically or practically recycle AgCl to Ag2O ?
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
|
AJKOER
Radically Dubious
Posts: 3026
Registered: 7-5-2011
Member Is Offline
Mood: No Mood
|
|
Recylcing AgCl, per my recollection, requires the right choice of sugar and strong heating (use a microwave to heat the aqueous mix which undergoes a
sudden rapid change in solution color when the reaction kicks in ).
More details on the process are discussed on the web.
[Edited on 26-12-2018 by AJKOER]
|
|
|
Sulaiman
International Hazard
Posts: 3721
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
| Quote: Originally posted by AJKOER | Recylcing AgCl, per my recollection, requires the right choice of sugar and strong heating (use a microwave to heat the aqueous mix which undergoes a
sudden rapid change in solution color when the reaction kicks in ).
More details on the process are discussed on the web. |
Reducing sugars can convert Ag2O to metalic Ag
AFAIK LYE is used to convert AgCl to Ag2O
so I suppose it is a possible route from NaOH to KOH
The Karo syrup process uses NaOH and reducing sugar to convert AgCl to Ag in a one-pot reaction,
which is what I guess you were thinking of ?
Given the small cost difference between NaOH and KOH I do not think that your proposed route is practicable,
especially for someone who does not know why KOH is commonly 90%
P.S I'm surprised that you did not go for the +hv (sunlight) route direct to Ag 
[Edited on 26-12-2018 by Sulaiman]
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
|
Texium
|
Thread Moved
26-12-2018 at 10:36 |
Ubya
International Hazard
Posts: 1247
Registered: 23-11-2017
Location: Rome-Italy
Member Is Offline
Mood: I'm a maddo scientisto!!!
|
|
plus now we need SILVER AND KCl to get just KOH, to get 100g of KOH with this method i would need: 50-100$ of silver to do all in 1 batch or 1 o 2$ of
silver and waste a month of lab time doing 100 batches.
would be easier to collect wood ash from various sources, leach off the potassium carbonate with water and add calcium hydroxide, after filtering
calcium carbonate you would have a probably impure KOH solution to dry. still better than using silver
---------------------------------------------------------------------
feel free to correct my grammar, or any mistakes i make
---------------------------------------------------------------------
|
|
|
ChemistryForever
Hazard to Self
Posts: 64
Registered: 6-12-2018
Member Is Offline
|
|
So basically there is no impurity in it except for water and maybe some potassium carbonate trace.
|
|
|
happyfooddance
National Hazard
Posts: 530
Registered: 9-11-2017
Location: Los Angeles, Ca.
Member Is Offline
Mood: No Mood
|
|
There is definitely going to be some potassium carbonate trace. But yes, high purity KOH is usually no more than 90% KOH.
|
|
|
Sulaiman
International Hazard
Posts: 3721
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
Most 'professional' chemical supplies have a production batch number,
and each batch has a Certificate of Analysis (CoA) that is either supplied or available to customers.
Most of the chemicals that I buy do not have a CoA,
so I look for something similar.
e.g. https://www.google.com/search?q=potassium+hydroxide+CoA&...
and I assume that my sample will have similar, but not identical, impurities.
Not perfect but a good start.
While searching for a CoA it is a good idea to download an MSDS
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
|
vmelkon
National Hazard
Posts: 669
Registered: 25-11-2011
Location: Canada
Member Is Offline
Mood: autoerotic asphyxiation
|
|
I'm not sure why people are recommending using Ag2O. It is an insoluble oxide and also required other chemicals to produce it.
People most likely have metallic silver. They would need HNO3 to make AgNO3. They would need some soluble hydroxide to make AgOH then heat it to Ag2O.
THAT IS NUTS!
Most likely people have KCl. It is best to go down the electrolysis route using the right equipment.
I used a flower pot, a polyethylene pot, some mineral oil to act as a barrier to prevent CO2 from coming into contact with the solution.
I did it with NaCl.
https://www.youtube.com/watch?v=bvNx65KXqcU
I ended up with a 1.38 M NaOH solution.
I used it to make Ca(OH)2 (solid) and I used some of the NaOH(aq) to make soap.
I considered drying it down but it is too messy and you need to use stainless steel or something. Don't use glass since NaOH attacks glass.
Another way would be the Ca(OH)2 route but that would make a very dilute NaOH or KOH solution.
[Edited on 1-1-2019 by vmelkon]
Signature ==== Is this my youtube page? https://www.youtube.com/watch?v=tA5PYtul5aU
We must attach the electrodes of knowledge to the nipples of ignorance and give a few good jolts.
Yes my evolutionary friends. We are all homos here. |
|
|
Mr. Rogers
Hazard to Others
Posts: 184
Registered: 30-10-2017
Location: Ammonia Avenue
Member Is Offline
Mood: No Mood
|
|
Can you dry it in an oven? Never tried that with KOH.
[Edited on 1-1-2019 by Mr. Rogers]
|
|
|
happyfooddance
National Hazard
Posts: 530
Registered: 9-11-2017
Location: Los Angeles, Ca.
Member Is Offline
Mood: No Mood
|
|
I'm pretty sure it is just AJKOER who is suggesting it. He often suggests highly novel and highly impractical things but you just have to take it for
what it is.
Everybody, meet AJKOER.
Sulaiman has already met him as he said:
I chuckled as I read this because I too was expecting to see some photons in his equations as soon as I saw Ag...
|
|
|
AJKOER
Radically Dubious
Posts: 3026
Registered: 7-5-2011
Member Is Offline
Mood: No Mood
|
|
OK, a few comments.
I did not dream of the Ag2O route as a path to conc NaOH or KOH (and relatively pure product as well), I accidentally observed it when it ate my
glassware (so more like a real nightmare) and reported it on SM (see comments and links at http://www.sciencemadness.org/talk/viewthread.php?tid=69061#... )!
Second, depending on how cheaply one can recycle silver, it well could be an economical path as well. I have not tried adding cheap ammonia water
(with total moles of ammonia at least twice that of silver chloride) to AgCl together with stirring and definitely with UV light treatment (optional
H2O2 also) in a closed system. But, I suspect it may work as the complex [Ag(NH3)2(H2O)4]+ is reportedly photo sensitive likely due to its breakdown
to Ag2O (which converts to a cubic Ag@Ag2O photocatalyst, see https://pubs.rsc.org/en/content/articlelanding/2012/jm/c2jm3...) and free NH3, as the reaction below is cited as reversible:
Ag2O(s) + 4NH3 + 4H2O <--> 2 [Ag(NH3)2]OH + 3 H2O (see http://www.sciencemadness.org/talk/viewthread.php?tid=70098#... )
where the removal of [Ag(NH3)2(H2O)4]+ means, to re-established the Ksp equilibrium for AgCl in the presence of ammonia, more silver chloride should
dissolve.
Comments on the web are favorable with respect to concentrated ammonia solutions (see https://www.google.com/search?source=hp&ei=tQsuXJQBzZvmA... ) so high strength commercial ammonia is an option.
Don't like working with ammonia and don't have any Ca(OH)2 (including from NH3 (aq) acting on CaCl2), suspect much harder (but interesting) would be
try applying strong sunlight light and reflected light from a lake or ocean or even snow (which has elevated UV levels) to a mix of AgCl/H2O2/HCO3- to
benefit from the powerful photocatalytic properties of Ag2CO3 and also Ag2O/Ag (which lead to active electron holes....and eventually AgOH creating
Ag2O).
Link to photocatalytic comments and warning on explosion hazard of silver and ammonia solutions at http://www.sciencemadness.org/talk/viewthread.php?tid=70098#... .
[Edited on 3-1-2019 by AJKOER]
|
|
|
happyfooddance
National Hazard
Posts: 530
Registered: 9-11-2017
Location: Los Angeles, Ca.
Member Is Offline
Mood: No Mood
|
|
Silver salts costs about $1 a gram.
My KOH comes in 2 lb containers from duda diesel, costs $6.95.
Putting KOH at about $0.007 a gram.
AJKOER, no one's arguing it won't work, but everyone will argue it is nothing close to economical. Even the metathesis ways are far more practical.
|
|
|
AJKOER
Radically Dubious
Posts: 3026
Registered: 7-5-2011
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by happyfooddance | Silver salts costs about $1 a gram.
My KOH comes in 2 lb containers from duda diesel, costs $6.95.
Putting KOH at about $0.007 a gram.
AJKOER, no one's arguing it won't work, but everyone will argue it is nothing close to economical. Even the metathesis ways are far more practical.
|
Wow! Ship two pounds for free(?)!
Made at home cost of recycled Silver, the cost of aqueous ammonia employed.
The price of KCl, the major cost factor depending on purity.
Ways of obtaining relatively low cost, high purity (using food grade KCl in the Ag2O path) and concentrated KOH, other than the Silver oxide path,
is......(I am still waiting  ).
[Edited on 3-1-2019 by AJKOER]
|
|
|
happyfooddance
National Hazard
Posts: 530
Registered: 9-11-2017
Location: Los Angeles, Ca.
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by AJKOER |
Wow! Ship two pounds for free(?)!
Made at home cost of recycled Silver, the cost of aqueous ammonia employed.
The price of KCl, the major cost factor depending on purity.
Ways of obtaining relatively low cost, high purity (using food grade KCl in the Ag2O path) and concentrated KOH, other than the Silver oxide path,
is......(I am still waiting ).
[Edited on 3-1-2019 by AJKOER] |
This is why you are precisely off the rocker:
I work in the food industry and can tell you with much certainty that food-grade KCl is more expensive than food-grade KOH. Pretty much ends your
argument.
No, they don't ship for free, but I got 10lbs CaCO3, a liter of phosphoric acid, 2lbs NaOH and 2lbs NaNO2 and the whole lot shipped for $14 via fedex.
|
|
|
clearly_not_atara
International Hazard
Posts: 2799
Registered: 3-11-2013
Member Is Offline
Mood: Big
|
|
OP is interested in drying his KOH, not making it.
I think you might be able to dry it by heating to red heat in a graphite crucible, and cooling in a sealed container purged with nitrogen. This chart
says graphite is "completely resistant" to molten potash, which is what you need:
https://ddenginc.com/gaskets/spiral-wound-gaskets/graphite-f...
Remember to wear good safety goggles whenever handling dry KOH. Even a tiny amount of dust could permanently damage your vision.
But first, you should check whether this is actually necessary. Dry-enough KOH is widely used in practical chemistry.
[Edited on 3-1-2019 by clearly_not_atara]
|
|
|
fusso
International Hazard
Posts: 1922
Registered: 23-6-2017
Location: 4 ∥ universes ahead of you
Member Is Offline
|
|
| Quote: Originally posted by happyfooddance | | I work in the food industry and can tell you with much certainty that food-grade KCl is more expensive than food-grade KOH. Pretty much ends your
argument. |
But why?
|
|
|
AJKOER
Radically Dubious
Posts: 3026
Registered: 7-5-2011
Member Is Offline
Mood: No Mood
|
|
OK, to be clear my Ag2O path works with any available K salt!
And yes, the very available (and pure) may be more expensive without adjusting for shipping cost.
[Edited on 3-1-2019 by AJKOER]
|
|
|
happyfooddance
National Hazard
Posts: 530
Registered: 9-11-2017
Location: Los Angeles, Ca.
Member Is Offline
Mood: No Mood
|
|
Maybe because there is a larger market (hence larger supply line) for KOH. Or maybe because with KCl you can make KOH and chlorine.
|
|
|
AJKOER
Radically Dubious
Posts: 3026
Registered: 7-5-2011
Member Is Offline
Mood: No Mood
|
|
One may be able to obtain 99.1% KCl in 40 pound bags as a water softener in select Home Depots for $32 (https://www.homedepot.com/p/Diamond-Crystal-40-lb-Potassium-... ).
Apparently, due to the use of KCl as a path to KClO3, in person and credit card purchases only (basically, you just put yourself on a watch list!).
[Edited on 5-1-2019 by AJKOER]
|
|
|
Tsjerk
International Hazard
Posts: 3032
Registered: 20-4-2005
Location: Netherlands
Member Is Offline
Mood: Mood
|
|
For the reason mentioned in the attachment the silver method suggested by AJKOER doesn't work. In alkaline solutions Ag2O is less soluble than AgCl.
It actually works the other way around, AgCl and hydroxide form Ag2O.
Attachment: willbanks1953.pdf (706kB)
This file has been downloaded 356 times
|
|
|
AJKOER
Radically Dubious
Posts: 3026
Registered: 7-5-2011
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by Tsjerk | | For the reason mentioned in the attachment the silver method suggested by AJKOER doesn't work. In alkaline solutions Ag2O is less soluble than AgCl.
It actually works the other way around, AgCl and hydroxide form Ag2O. |
Having worked with Silver salts and performed a successful recovery of Ag2O, the alluded to paper is correct on careful reading. On page 1, there is a
comment on boiling with NaOH for 15 minutes.
So, the reaction is:
AgCl + NaOH + Heat = AgOH + NaCl
2 AgOH = Ag2O + H2O
Now, my report on strong NaOH formation on standing may actually be associated with silver acetate and not silver chloride. On a supplied old paper on
the solubility of Ag2O presented on SM, it was noted that AgOH displays amphoteric behavior (see 'The Solubility of Silver Oxide in Water, in Alkali
and in Alkaline Salt Solutions. The Amphoteric Character of Silver Hydroxide' by HERRICK L. JOHNSTON, et al). So, the first equation is perhaps more
reversible with basic sodium acetate as opposed to aqueous sodium chloride conaining a suspension of Ag2O.
---------------------------------------------------------
As such my revised alternative path (to be verified) for KOH employing Ag2O may be possibly sourced from potassium acetate or potassium bitartrate
(cream of tartar). While the latter food additive goes for around $7 a pound, it is readily available on amazon and is not on a watch list.
More interesting is simply mixing an organic potassium salt with Ag2O and arranging the aqueous suspension in a large surface area shallow dish in
strong visible light! Per a reference (see https://onlinelibrary.wiley.com/doi/abs/10.1002/chem.2011010... ) on the light conversion of Ag2O to the excellent photocatalyst janus particle
Ag@Ag2O, generating electrons and electrons holes, which could attack the organic anion leaving KOH.
[Edited on 6-2-2019 by AJKOER]
|
|
|
Herr Haber
International Hazard
Posts: 1236
Registered: 29-1-2016
Member Is Offline
Mood: No Mood
|
|
Wouldnt you have to use an inert atmosphere for the whole process ?
Red hot graphite crucible = lots of CO2 to react with the KOH
I also dont see how to avoid contaminating KOH with graphite. Whenever I use my kiln I always leave a good trail of carbon dust between the mold and
the kiln.
(But maybe I should just use a new crucible and stop being so cheap)
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
