khourygeo77
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 114
Registered: 2-1-2017
Member Is Offline
Mood: No Mood
|
|
Easily available solvents (polar & non polar). BP less than 70 C
Any idea which solvents I can find, generally easily obtainable without having to find them in chemical stores, as they sell stuff not cheaply at all
in here.
Boiling point I'm looking for is in the beginning of the 70s deg C until 30s deg C.
I could find 1 only: acetone.
It's fairly difficult to find such solvents here in hardware stores or markets or pharmacies. I have a distillation apparatus so if these solvents can
be found mixed with impurities, I can separate the 2
I tried looking for petroleum, light naphtha, coleman fuel as a source for hexane. Couldnt find any... Was forced to buy from a chemical store: 200ml
for like 20$
Any idea?
|
|
Sulaiman
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3632
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
Most of the common solvents will boil in the 30 to 70 oC range ... under vacuum.
Just a water aspirator can reduce the b.p.significantly, e.g. it can reduce the b.p. of water to 20 oC or less.
I use one of these (mostly for vacuum filtration) ...with it water boils well below 70 oC http://www.ebay.co.uk/itm/Multi-Function-DC-12V-Micro-Piston...
Here is a video that may help https://www.youtube.com/watch?v=tYLlkTDstmo
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
Texium
Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4547
Registered: 11-1-2014
Location: Salt Lake City
Member Is Offline
Mood: PhD candidate!
|
|
DCM 40C, easily distilled from paint stripper. Check SDS for the brands you find.
Methanol 65C, HEET antifreeze (the yellow one, not the red one) or sometimes found more cheaply as windshield washer fluid, but that may need
distillation. May also be obtainable from the same paint stripper as DCM.
Diethyl ether 35C, easily distilled from starting fluid which can be purchased at auto stores or places like Walmart. There are many videos of this.
That was easy.
|
|
XeonTheMGPony
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1638
Registered: 5-1-2016
Member Is Offline
Mood: No Mood
|
|
n - Hexane is used in electrical contact cleaner. Slow care full distillation of gas will give petroleum ether.
As others have said DCM can be removed from paint stripper, I recommend using the can it comes in as the distillation vessel as the other stuff they
add is very goopy.
Acetone free nail polish remover is mostly Ethyle acetate.
Too many options to name really, pick a product and research, rinse and repeat you'll have more solvents then you know what to do with.
|
|
Vosoryx
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 282
Registered: 18-6-2017
Location: British Columbia, Canada
Member Is Offline
Mood: Serial Apple Enjoyer
|
|
I can buy almost pure methanol in home depot, it's sold very cheap as a stripper with a BP of 65.
Although it's a bit over your requirements, MEK (Butanone) has a BP just under 80, and can be bought at some industrial stores.
The DCM route is a fast, fun, and easy distillation to do, but it usually ends up forming an azeotrope with any methanol in the stripper. This can be
removed by washing with water, and separating out the layers if you need methanol free DCM. (Home depot also sells a varnish stripper with about 70%
DCM in it, this is the route I go to get mine.
Though it is obviously not economical, the drugstore DOES have solvents. I have found ethyl alcohol, also known as ethanol, in a drug store, although
it's BP is 8 degrees above your requirements. Be careful not to get it confused with Propanol, sold as isopropyl alchohol, because it has a BP of
basically a hundred.
Hexane (68) can be distilled from the same source that diethy ether (35) can be; cold engine starters, and I once saw tetrahydrofuran (65) in a
specialty industrial store.
These are just the solvents I remembered having BP's around what you asked. I didn't do any research, aside from googling the BP on some of them. Even
if you didn't know, why not just google "Common solvents in chemistry" and then find the ones that match your BP requirement?
Search engines are useful and there for a reason, and you will probably find something that we don't know/remember.
|
|
clearly_not_atara
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2725
Registered: 3-11-2013
Member Is Offline
Mood: Big
|
|
Methanol is common as windshield wiper fluid; diethyl ether is common in starter fluid. Acetonitrile bp 82 C can be made from ammonium diacetate.
Chloroform can be made by the oxidation of ethanol, isopropanol, or acetone with hypochlorite bleach.
I think one of those will work for you. Or DCM/EtOAc as mentioned above.
|
|
vmelkon
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 669
Registered: 25-11-2011
Location: Canada
Member Is Offline
Mood: autoerotic asphyxiation
|
|
If you want to make chloroform, a cheap source of chlorine is Ca(ClO)2 (Calcium hypochlorite). It comes in solid form. Usually between 60 to 75% pure.
Most hardware stores will have them and also department stores in the pool stuff section.
Signature ==== Is this my youtube page? https://www.youtube.com/watch?v=tA5PYtul5aU
We must attach the electrodes of knowledge to the nipples of ignorance and give a few good jolts.
Yes my evolutionary friends. We are all homos here.
|
|
DraconicAcid
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4298
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
Quote: Originally posted by Vosoryx ![](images/xpblue/lastpost.gif) | Be careful not to get it confused with Propanol, sold as isopropyl alchohol, because it has a BP of basically a hundred. |
The boiling point of isopropanol is 80oC.
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
Vosoryx
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 282
Registered: 18-6-2017
Location: British Columbia, Canada
Member Is Offline
Mood: Serial Apple Enjoyer
|
|
Acetone and bleach. That's how I always do it... nice and simple. NileRed did a video on that method, it was the first video of his I ever saw. There
are obviously other ways of making chloroform, but that's the easiest in my opinion.
|
|
khourygeo77
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 114
Registered: 2-1-2017
Member Is Offline
Mood: No Mood
|
|
I want solvents for the purpose of dissolving and fraction distilling. So I'm not sure if it will make a difference in vacuum as both of the
substances will distill at a similar temperature
|
|
khourygeo77
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 114
Registered: 2-1-2017
Member Is Offline
Mood: No Mood
|
|
It's not easy to find these products here
Concerning the DCM, I have tried to search for it as a paint stripper and was met with surprise everytime at hardware stores. They only sell heavy
naphtha & thinner. I hope the case will be different when searching for other solvents. Actually the hardware stores I visit think I'm a creep due
to my impossible requirements everytime lol
As for the methanol found as antifreeze & diethyl ether at auto stores as a starting fluid & hexane as electric cleaner & hexane at cold
engine starter & methanol as in windshield wiper, I will try to research & search for asap
I can google possibly available & distillable solvents, however I dont find the same products in my country. I tried several times to use google
but not efficacious
I will try to make chloroform later on and try to find out if the products here contain these substances.
thanks for your help
edit: It seems most solvents are found at auto stores. So I guess if I go there and scan the products, I may find these things & more, right?
[Edited on 24-9-2017 by khourygeo77]
[Edited on 24-9-2017 by khourygeo77]
|
|
Vosoryx
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 282
Registered: 18-6-2017
Location: British Columbia, Canada
Member Is Offline
Mood: Serial Apple Enjoyer
|
|
Don't ask them directly for DCM... they're not going to know. Just ask for their varnish or paint strippers, and read the labels yourself.
Tip: Dichloromethane is sometimes called Methylene Chloride.
|
|
khourygeo77
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 114
Registered: 2-1-2017
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by Vosoryx ![](images/xpblue/lastpost.gif) | Don't ask them directly for DCM... they're not going to know. Just ask for their varnish or paint strippers, and read the labels yourself.
Tip: Dichloromethane is sometimes called Methylene Chloride. |
I have used paint strippers many times. I have only heard about the heavy naphta & thinner types, so did the people of the hardware store and many
workers. I used to ask the hardware stores for types of paint strippers, they would reply with "thinner" and "naphtha". They say that's the only 2
they have...
Maybe I should check for a large hardware store that may contain many different things than the ones commonly found at the common stores or
a store specialized at selling paint stuff...
[Edited on 24-9-2017 by khourygeo77]
|
|
DionSukhram6
Harmless
Posts: 16
Registered: 7-4-2017
Location: New York
Member Is Offline
Mood: No Mood
|
|
I'm an amateur on a tiny chemistry budget so i usually use stuff like methanol (HEET for like $2 or $3), ethanol and isopropanol (which you can make
ethyl acetate from), I make a bit of chloroform if I need it as some have said already, diethyl ether, Heptane, and other stuff from starter fluids,
and my dad works with furniture so I can easily get stuff like toluene, DCM, and Naphtha from paint strippers. As NurdRage has shown, you can also
easily get ethylene glycol and dioxane from stuff like antifreeze but I don't like using them unless necessary at home because of the toxicity
|
|
Vosoryx
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 282
Registered: 18-6-2017
Location: British Columbia, Canada
Member Is Offline
Mood: Serial Apple Enjoyer
|
|
I don't know where you are in the world, but home depot, which is a franchise across U.S. and Canada (and probably other countries, too.) Owns a brand
of stripper that does contain DCM.
And even if your local store doesn't have it, they can order it in from other stores, being an international franchise.
DCM is a very common chemical. Go to paint stores, hardware stores, even boating stores might carry something with it. Read the labels on all of the
strippers, and in a last resort ask them to order it.
|
|
unionised
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 5109
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
It rather depends where you are.
DCM is increasingly hard to find in the EU because someone noticed that it's carcinogenic (as well as rather toxic) and banned it.
I suspect that the OP lives somewhere in the world where the job of stripping paint is done with a blowtorch or steel wool.
95% or so of the world's population does not live in the USA.
Chloroform from acetone and bleach is probably the best option.
|
|
Vosoryx
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 282
Registered: 18-6-2017
Location: British Columbia, Canada
Member Is Offline
Mood: Serial Apple Enjoyer
|
|
If you somehow can't find DCM, i'd second the chloroform idea.
I had no idea DCM was banned in the EU... Very interesting.
as unionised pointed out, the availability of chemicals absolutely depends on your country. Perhaps there is someone here from your country who could
tell you where they get chemicals.
|
|
khourygeo77
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 114
Registered: 2-1-2017
Member Is Offline
Mood: No Mood
|
|
There is nobody in the same country for sure.
I'll surely give chloroform a try.
I hope I can find hexane & methanol.. I'll start listing the auto stores available in the area
Shit here is very expensive. 1L of acetone may cost like 70+$ from a chemical store. I can distill that much from nailpolish for 5$
|
|
Vosoryx
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 282
Registered: 18-6-2017
Location: British Columbia, Canada
Member Is Offline
Mood: Serial Apple Enjoyer
|
|
That is very expensive. It's unfortunate you can't find it at an industrial store that carries it, Acetone's even cheaper there.
Make sure the nail polish remover you buy actually contains acetone... Many nowadays do not. You don't need a lot of acetone to make chloroform, it
should end up being your limiting reagent anyway.
If you're going to make chloroform, I recommend watching NileRed's video on it.
https://www.youtube.com/watch?v=j-PrAczOGb0
Good luck!
|
|
VSEPR_VOID
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 719
Registered: 1-9-2017
Member Is Offline
Mood: Fullerenes
|
|
Butane can be used as a non-polar solvent as it has a BP of 0C. It can be purchased a lighter fuel refills and used for extraction or reflux. Its best
to cool the container/condenser with a mixture of dry ice and alcohol.
Within cells interlinked
Within cells interlinked
Within cells interlinked
|
|