Db33
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 206
Registered: 25-11-2016
Member Is Offline
Mood: No Mood
|
|
Water pump problem
i tried my first vcuum distillation today and EVERYTHING went great except one part. the simplest part! The condenser wasnt working. Not the condenser
but i couldnt get water to pump from the bucket threw the conenser.
![IMG_0281.jpg - 103kB](http://www.sciencemadness.org/talk/files.php?pid=471196&aid=56010)
This is the pump i was using next to the condenser, the tubing didnt fit like i thought so i used a different tubing and still for some reason it
would only push water 10 inches up the tubing and then stopped? Is this pump just too weak? Can someone please give me a link to a good strong
condenser pump and the correct diameter to fit the 3/8 arm of the condenser?
Edit: descriptive title
[Edited on 1-9-2017 by zts16]
|
|
DDTea
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 940
Registered: 25-2-2003
Location: Freedomland
Member Is Offline
Mood: Degenerate
|
|
Yeah, it sounds as if the pump isn't strong enough. Maybe try siphoning from the condenser's water outlet to get the flow going.
"In the end the proud scientist or philosopher who cannot be bothered to make his thought accessible has no choice but to retire to the heights in
which dwell the Great Misunderstood and the Great Ignored, there to rail in Olympic superiority at the folly of mankind." - Reginald Kapp.
|
|
Sulaiman
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3635
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
I have a similar small water pump ... check that there are not closed flow control shutters at the water intake,
you could raise up your water reservoir,
but will you feel comfortable trusting that pump when you are not watching ?
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
SelfInflicted
Harmless
Posts: 15
Registered: 27-12-2008
Location: North America
Member Is Offline
Mood: ?
|
|
The pump has a maximum head pressure of 10 inches it appears. Tubing size will not change that. No matter how much volume of water the pump can move
it can only push water uphill 10 inches.
The recommendations of raising the basin you are pumping from or creating an siphon are valid. If the water in the basin, that the pump is immersed
in, is within 10 inches of the highest point of tubing water will flow.
If you fill the tubing and condenser jacket up with water and create a siphon the water will flow. The return line outlet must be below 10 inches
above your water source.
The pump will move more water at 1 inch head than 9 inches of head. Probably not much water will pump at 9 inches and no water will flow at 10 inches,
since you have determined that it can only pump to 10 inches. Immersing the return line in your water source would equate 0 inches of head pressure.
Small tubing can restrict the flow, restricting the volume of water that can be delivered over time.
|
|
Magpie
lab constructor
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 5939
Registered: 1-11-2003
Location: USA
Member Is Offline
Mood: Chemistry: the subtle science.
|
|
That doesn't sound like much of a pump. I bought a Little Giant pond pump at Ace Hardware over 10 yrs ago and it is still going strong. It will
raise water at least 3' and only cost about $25. Literature came with it providing height vs flow rate.
As the previous poster said once you get a siphon going it doesn't take much of a pump, however.
Edit: price: $46; model P-AAA; shut-off head: 4.2': fountain pump
[Edited on 8-1-2017 by Magpie]
The single most important condition for a successful synthesis is good mixing - Nicodem
|
|
JJay
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3440
Registered: 15-10-2015
Member Is Offline
|
|
Those Little Giant pumps are great and will run forever if maintained. They have an internal membrane/rotor that is supposed to be greased with a
petroleum lubricant.
Hydroponics stores usually sell small pumps that work well with condensers despite less throughput than the Little Giant.
|
|
unionised
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 5109
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
If you fill all the tubing and the condenser with water (from the tap) before you connect the pump it won't have to overcome any head- it just needs
to push the water round the system.
It takes a lot more work to fill the tubing than to keep it full because a lot of the work out into raising the water on one side is recovered when
the water falls down the other.
|
|
Herr Haber
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1236
Registered: 29-1-2016
Member Is Offline
Mood: No Mood
|
|
I got the smallest and cheapest pump possible from the hydro store and it works just fine.
As Sulaiman said: check the pump
Maybe it's just "stuck" because it is brand new or intakes are blocked.
|
|
JJay
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3440
Registered: 15-10-2015
Member Is Offline
|
|
I have a couple of hydroponics store pumps that look similar, but I suspect that's actually an aquarium pump. They aren't designed to lift water like
hydroponics pumps.
|
|
Bert
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2821
Registered: 12-3-2004
Member Is Offline
Mood: " I think we are all going to die. I think that love is an illusion. We are flawed, my darling".
|
|
Look at replacement pumps designed for water cooled tile saws, if you do not mind using AC mains power... They are a bit more industrial, probably
have a bit more head than 12V DC fountain pumps and do not choke on a bit of debris.
https://www.amazon.com/s/?ie=UTF8&keywords=mk+tile+saw+p...
Rapopart’s Rules for critical commentary:
1. Attempt to re-express your target’s position so clearly, vividly and fairly that your target says: “Thanks, I wish I’d thought of putting it
that way.”
2. List any points of agreement (especially if they are not matters of general or widespread agreement).
3. Mention anything you have learned from your target.
4. Only then are you permitted to say so much as a word of rebuttal or criticism.
Anatol Rapoport was a Russian-born American mathematical psychologist (1911-2007).
|
|
biomechem
Unregistered
Posts: N/A
Registered: N/A
Member Is Offline
|
|
Rise the bucket a little bit so the pump will be less loaded.
[Edited on 9-1-2017 by biomechem]
|
|