alking
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 252
Registered: 11-3-2016
Member Is Offline
Mood: No Mood
|
|
What's going on with my H2SO4 draincleaner? Will not clarify with H2O2.
I have a common brand of sulphuric acid based drain cleaner. It's generally pretty clean, just a light tan/yellow color to it, but I want some clean
98%. Last time I vacuum distilled it and it was a pita because I just can't apply enough heat. If I'm doing 100 to maaaybe 200ml I can do it, but
beyond that it just sits there. So I tried to do the H2O2 cleanup, but to my surprise it's not working and I'm curious what is going on.
I add the H2O2, 35%, and stir with a little heat, ~80C or so. As you would expect it seems to clear up. I think there is just a tinge of color, but I
can't be sure, it's so faint. Adding more H2O2 doesn't seem to remove it so I figured it must be the lighting. I remove the stir bar and heat it up
outside to which it quickly turns yellow and it does not seem to dissipate over time.
I repeat the H2O2 trick until it becomes clear again, or clearish as before anyway, thinking I just didn't add enough. Back to try and boil it off and
it turns the same color/shade. It's getting cold outside so I stop the project for the day and as it cools I notice there are now suspended salts in
it which were previously not there (or dissolved anyway) and a lot, but not all, of the color fades as well. I really doubt I boiled the water off as
I never even got it to boil, just degas and fume, so that shouldn't have affected the solubility if any were present before. Any ideas what is going
on?
|
|
alking
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 252
Registered: 11-3-2016
Member Is Offline
Mood: No Mood
|
|
Well no answers, but I've given up and am just distilling it with a bunson burner. I'm assuming these must be metal sulphates of some kind and that I
have no choice but to distill.
|
|
alking
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 252
Registered: 11-3-2016
Member Is Offline
Mood: No Mood
|
|
I'd still like some help with this actually. I'm confused as these do not seem to be soluble in water but I don't know how. The only thing I can think
is that it must be a new compound created with the addition of the h2o2. I used some of this drain cleaner to make piranha solution to clean some
glasswear and now I have the white flakes stuck in it. It will not dissolve in water or hcl.
|
|
Sulaiman
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3647
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
I've not had enough confidence yet to go to boiling H2SO4 or Hg temperatures, so no help there.
As you are distilling, you will get the imputities left in the pot,
maybe a clue there ?
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
AngelEyes
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 187
Registered: 24-1-2003
Location: South of England
Member Is Offline
Mood: Better than it used to be.
|
|
Maybe filter it through activated charcoal?
I think that will remove a lot of the more solid and particulate crap, as well as any dye that may be in there.
\'Silk and satin, leather and lace...black panties with an Angel\'s face\'
|
|