Sciencemadness Discussion Board
Not logged in [Login ]
Go To Bottom

Printable Version  
Author: Subject: Ethers
johnfireball
Harmless
*




Posts: 1
Registered: 23-11-2016
Member Is Offline

Mood: No Mood

[*] posted on 23-11-2016 at 18:14
Ethers


Hi all,
I am making diethyl ether from scratch for use in my model diesel engines and am finding it painfully labour intensive to get 90% ethanol from alcohol brewing. I am using drain cleaner as a source of sulphuric acid and it works ok so long as it's well heated ( 200 degrees c) before use. I am wondering could I substitute this methylated spirit www.decorireland.com/DEC1/DEC1-SHOP/pdfs/Safety%20Data%20She... for the ethanol and get a similar product without any further risk. The ether is really required only for getting the engine started and aiding the mixing of oil and paraffin.
All comments welcome thanks.
View user's profile View All Posts By User
Maroboduus
Hazard to Others
***




Posts: 257
Registered: 14-9-2016
Location: 26 Ancho Street
Member Is Offline

Mood: vacant

[*] posted on 23-11-2016 at 20:39


It will work (I did it back before I had a good still), but you'll get some methyl ethyl ether as well, which has an even lower boiling point. Very little dimethyl ether will be produced.

If by brewing 90% ethanol you mean distilling, this is easier with a good fractionating column. I can go from 40% to 90% in one distillation with a 300mm Vigreux column. This isn't even a very careful distillation. I don't bother to insulate the column.

But for your use it sounds like using meths should be just fine.

You do know about ether peroxides, right? Don't want any unexpected detonations so I thought I'd ask.
View user's profile View All Posts By User
XeonTheMGPony
International Hazard
*****




Posts: 1640
Registered: 5-1-2016
Member Is Offline

Mood: No Mood

[*] posted on 24-11-2016 at 04:36


you can get a fuel called bioflame, it is essentially 9x% ethanol, recently I found some where the denaturing agent was ethyl acetate, score was all that rung out from the brain, reflux over sodium hydroxide and distill for 100% ethanol as the hydroxide phase will trap any moisture (Well enough for it to be a non issue!

For those of us in Canada it is found at Canadian tire and in Home hard ware stores for the most part
View user's profile View All Posts By User
Meltonium
Hazard to Self
**




Posts: 97
Registered: 23-9-2016
Location: Home in pajamas
Member Is Offline

Mood: Fluorinated

[*] posted on 24-11-2016 at 07:03


There is an easy source of ethanol located at Home Depot. In the Paint section there should be a place where there is a whole bunch of different laquer thinners. The one with ethanol is labeled as "Green Paint Thinner" look on the back and it should say "Contains ethyl alcohol and methyl alcohol" Where I am, it is 95% ethanol with some ethyl acetate and methanol according to the MSDS. You can separate these by distilling over some sodium hydroxide and BOOM, you have nearly anhydrous ethanol.
View user's profile View All Posts By User
XeonTheMGPony
International Hazard
*****




Posts: 1640
Registered: 5-1-2016
Member Is Offline

Mood: No Mood

[*] posted on 24-11-2016 at 07:06


the stuff I am referring to contains no methanol groups but that too is correct, we do not have it here, or at least not that I have ever seen.

they do have larger jugs of the bio flam that are 98% ethanol with a 1-2% isopropyle group in it.
View user's profile View All Posts By User
Melgar
Anti-Spam Agent
*****




Posts: 2004
Registered: 23-2-2010
Location: Connecticut
Member Is Offline

Mood: Estrified

[*] posted on 25-11-2016 at 07:33


Ethyl acetate and methanol probably wouldn't be a problem if you're just using it as starting fluid. Really, I usually get my ether (and heptane) by distilling starting fluid from the auto parts store, which is only like $3 for an 11-ounce aerosol can of it. I've seen diesel starting fluid for sale at feed stores and auto parts store before, but it's always pretty expensive, it usually seems to come in these heavy-duty steel cylinders, and I'm not sure what's in it. I know you're not supposed to use heptane in diesel engines, but ether is apparently okay.
View user's profile View All Posts By User
Texium
Administrator
Thread Moved
25-11-2016 at 08:46

  Go To Top