FireLion3
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 218
Registered: 11-1-2014
Member Is Offline
Mood: No Mood
|
|
Caustic Vapor from adding Sodium Hydroxide to water?
This has stumped me for years now and I've never really been bothered enough to look into it until now.
Every time I add Sodium Hydroxide to water, it seems to give off some very minor caustic vapor when its being stirred in, that is somewhat harsh on my
lungs if I happen to get a whiff of it. Doesn't matter if it's distilled water or water from the faucet.
What is this? The only theory I have is that maybe somehow the sodium hydroxide particles are getting carried away in the water vapor, but I don't see
how this is even possible, as it happens even if the water only heats up to about 40c. Plus, I didn't really think it could be carried up in vapor as
a solid.
|
|
elementcollector1
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2684
Registered: 28-12-2011
Location: The Known Universe
Member Is Offline
Mood: Molten
|
|
Probably a sodium hydroxide aerosol, or some such, created by the vapor and NaOH.
Elements Collected:52/87
Latest Acquired: Cl
Next in Line: Nd
|
|
Velzee
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 381
Registered: 19-8-2015
Location: New York
Member Is Offline
Mood: Taking it easy
|
|
It's NaOH being forced into the air.
A similar effect occurred to me:
Quote: |
Following along Nile Red's method of boiling down the solution to dryness, I proceeded to empty the container on to a piece of paper, while using a
t-shirt to protect me from inhalation(I didn't expect anything bad ) and I started
coughing like a smoker with an itch in his throat, and when I exhaled, my breath would go directly in to my eyes, which I presumed shot microparticles
into my eyes because I felt two or three small sharp pains on my eyes. After hurriedly putting the LiOH in a Ziploc bag, I opened my window (yes, I
did this in my bedroom because I thought I would not encounter any problems)and turned on my fan and ran out, still feeling irritation when ever I'd
inhale in the area.
|
And as a response to my prior experiments, a friend messaged me this:
Quote: |
Were you properly ventilated? That reaction releases lithium hydroxide and loads of heat.
|
Check out the ScienceMadness Wiki: http://www.sciencemadness.org/smwiki/index.php/Main_Page
"All truth passes through three stages. First, it is ridiculed. Second, it is violently opposed. Third, it is accepted as being self-evident."
—Arthur Schopenhauer
"¡Vivá Cristo Rey!"
—Saint José Sánchez del Río
|
|
FireLion3
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 218
Registered: 11-1-2014
Member Is Offline
Mood: No Mood
|
|
I didn't realize something such as Sodium Hydroxide could be so easily volatile into the air, especially out of a solution that is being stirred very
gently.
|
|
aga
Forum Drunkard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7030
Registered: 25-3-2014
Member Is Offline
|
|
Recently i found out that my local supply of NaOH contains a significant quantity of NaCl.
Screening incoming reagents appears to be necessary, yet i cannot imagine how to separate just NaOH from this mix.
Better to dump it and buy/make pure reagents ?
|
|
Sulaiman
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3634
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
since we normally add dry sodium hydroxide to water,
I guess it could just be very fine dust.
To test: pour a similar quantity of sodium hydroxide into another dry container.
[Edited on 11-4-2016 by Sulaiman]
|
|
unfrozen
Harmless
Posts: 19
Registered: 5-10-2014
Location: Wyoming, US
Member Is Offline
Mood: Waiting for an indicator
|
|
I see this happen almost always when adding 337g NaOH to 787g H2O. The liquid gets hot, but probably well under 80C. I wrote to 3M, asking if P95
respirator filters are okay.
The reply was, "Yes. The 3M 6900 Full Facepiece with a P95 filter (3M 2071/2078) is a suitable choice for both NaOH dust and the fumes generated from
mixing."
|
|
Magpie
lab constructor
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 5939
Registered: 1-11-2003
Location: USA
Member Is Offline
Mood: Chemistry: the subtle science.
|
|
I have choked also when adding NaOH to water. I agree that an aerosol must be formed which then moves upward into my breathing space. I have to step
back quite a ways to get fresh air. I have learned to do this in my hood with the fan on. This way I don't get this choking aerosol.
The single most important condition for a successful synthesis is good mixing - Nicodem
|
|
NedsHead
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 409
Registered: 9-12-2014
Location: South Australia
Member Is Offline
Mood: No Mood
|
|
I mostly use potassium hydroxide and have the same experience, could it be the water flash boiling in contact with the hydroxide and releasing a
vapour? I've had an identical chocking cough from the caustic dust when transferring the dry potassium hydroxide flakes without proper ventilation or
a mask
|
|
Loptr
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1348
Registered: 20-5-2014
Location: USA
Member Is Offline
Mood: Grateful
|
|
The experience seems to be universal as it also happens everytime to me, especially if trying to use the solution immediately; which was a bad habit
of mine, but then I started making sets of stock solutions.
I had an issue with temperature sensitive intermediates that were decomposing/dimerizing from the heat of hydration of the freshly mixed solution. I
learned pretty quickly.
[Edited on 12-4-2016 by Loptr]
|
|
Ozone
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1269
Registered: 28-7-2005
Location: Good Olde USA
Member Is Offline
Mood: Integrated
|
|
Tiny droplets get carried up with the steam.
O3
-Anyone who never made a mistake never tried anything new.
--Albert Einstein
|
|
CharlieA
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 646
Registered: 11-8-2015
Location: Missouri, USA
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by FireLion3 ![](images/xpblue/lastpost.gif) | I didn't realize something such as Sodium Hydroxide could be so easily volatile into the air, especially out of a solution that is being stirred very
gently. |
This is not a question of volatility. The sodium hydroxide in the air is an aerosol: very fine particles, not molecules, suspended in air.
|
|
unfrozen
Harmless
Posts: 19
Registered: 5-10-2014
Location: Wyoming, US
Member Is Offline
Mood: Waiting for an indicator
|
|
Quote: Originally posted by CharlieA ![](images/xpblue/lastpost.gif) |
This is not a question of volatility. The sodium hydroxide in the air is an aerosol: very fine particles, not molecules, suspended in air.
|
Thanks, that is good to know. So I can assume that my P95 filters are slowly getting clogged with sodium carbonate.
|
|
FireLion3
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 218
Registered: 11-1-2014
Member Is Offline
Mood: No Mood
|
|
But this all still begs the question, how is an aerosol getting created? I've had these caustic vapors hit me even if the temperature of the solution
was only 30 degrees, with a very tiny amount of hydroxide added in. Certainly not enough for any appreciable steam to form to even carry particles in
the air. I'm just having a little difficulty imagining how such an aerosol is forming from a room temperature or even cold solution.
|
|
Loptr
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1348
Registered: 20-5-2014
Location: USA
Member Is Offline
Mood: Grateful
|
|
Quote: Originally posted by FireLion3 ![](images/xpblue/lastpost.gif) | But this all still begs the question, how is an aerosol getting created? I've had these caustic vapors hit me even if the temperature of the solution
was only 30 degrees, with a very tiny amount of hydroxide added in. Certainly not enough for any appreciable steam to form to even carry particles in
the air. I'm just having a little difficulty imagining how such an aerosol is forming from a room temperature or even cold solution.
|
I seem to recall it happening when the mixture has began to heat up substantially, and when the beaker is very warm to the touch.
|
|