DalisAndy
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 129
Registered: 8-5-2015
Member Is Offline
Mood: No Mood
|
|
Tap water
Is it ok, for general reaction, if the water use as a solvent contains high levels of phosphate? I was going to make some trimethyl borate so yeah
Elements Collected: 19/81 (Excluding all radioactive, using placecard for those)
Any tips or good sources are welcome.
|
|
Bert
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2821
Registered: 12-3-2004
Member Is Offline
Mood: " I think we are all going to die. I think that love is an illusion. We are flawed, my darling".
|
|
Spend the few cents extra for distilled or deionized water. Especially if you KNOW your tap water is not especially pure-
Rapopart’s Rules for critical commentary:
1. Attempt to re-express your target’s position so clearly, vividly and fairly that your target says: “Thanks, I wish I’d thought of putting it
that way.”
2. List any points of agreement (especially if they are not matters of general or widespread agreement).
3. Mention anything you have learned from your target.
4. Only then are you permitted to say so much as a word of rebuttal or criticism.
Anatol Rapoport was a Russian-born American mathematical psychologist (1911-2007).
|
|
Detonationology
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 362
Registered: 5-5-2015
Location: Deep South
Member Is Offline
Mood: Electrophillic
|
|
Quote: Originally posted by DalisAndy ![](images/xpblue/lastpost.gif) | Is it ok, for general reaction, if the water use as a solvent contains high levels of phosphate? I was going to make some trimethyl borate so yeah
|
What do you need water for? To recrystalize the H3BO3?
“There are no differences but differences of degree between different degrees of difference and no difference.” ― William James
|
|
DalisAndy
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 129
Registered: 8-5-2015
Member Is Offline
Mood: No Mood
|
|
No, as a solvent for the reaction. My methonal is 99% pure so I will have to add water. Won't I?
Elements Collected: 19/81 (Excluding all radioactive, using placecard for those)
Any tips or good sources are welcome.
|
|
Detonationology
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 362
Registered: 5-5-2015
Location: Deep South
Member Is Offline
Mood: Electrophillic
|
|
No solvent is needed, the reaction is not aqueous. Only double replacement reactions take place in solution. Alcohols do not form ions in water, so
therefore the reaction is considered a synthesis. In order to consider your final product pure, the ester will need to be separated from the water
byproduct via fractional distillation. In the case of trimethyl borate, the product is ~2:1 ratio of B(OCH3)3 to water by volume, and 1:3 mole ratio.
[Edited on 10-22-2015 by Detonationology]
“There are no differences but differences of degree between different degrees of difference and no difference.” ― William James
|
|
DalisAndy
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 129
Registered: 8-5-2015
Member Is Offline
Mood: No Mood
|
|
Wouldn't it be easier to heat the reaction? It would allow the water to vaporize off. Or I could use a drying agent. I don't have any way of doing
any distillation. I have minimal equipment
Elements Collected: 19/81 (Excluding all radioactive, using placecard for those)
Any tips or good sources are welcome.
|
|
Detonationology
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 362
Registered: 5-5-2015
Location: Deep South
Member Is Offline
Mood: Electrophillic
|
|
A molecular sieve seems to be the most viable option for desiccate the final product. These threads should be merged with the other existing
alcohol/borate synthesis'.
“There are no differences but differences of degree between different degrees of difference and no difference.” ― William James
|
|
Amos
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1406
Registered: 25-3-2014
Location: Yes
Member Is Offline
Mood: No
|
|
Quote: Originally posted by DalisAndy ![](images/xpblue/lastpost.gif) | Wouldn't it be easier to heat the reaction? It would allow the water to vaporize off. Or I could use a drying agent. I don't have any way of doing
any distillation. I have minimal equipment |
The synthesis of trimethyl borate is a condensation, or more correctly an esterification reaction. Water is produced as a byproduct in the reaction,
and due to the reaction equilibrium, any unnecessary water present will only serve to convert the products back to the starting materials, reducing
your yield.
If you don't have any method of doing distillation, then you're probably not able to do reflux, either. Making the borate ester of methanol usually
uses excess methanol as a solvent, boric acid, and a substantial quantity of sulfuric acid as a catalyst and water-sequestering agent. Reflux is then
carried out for a period of time and the trimethyl borate and excess methanol can be distilled off.
If you don't follow the procedure properly and just skip the reflux and distillation altogether, you're going to end up with a somewhat viscous and
highly corrosive(due to sulfuric acid) liquid containing some trimethyl borate. It will probably burn with a weak green flame and leave a puddle of
very troublesome sulfuric acid behind. It may even give off some toxic and corrosive sulfur oxides as it burns! Fun times. You could always just dump
some roach killer into HEET and see if that burns green, but at that point why even bother calling it chemistry?
|
|
Metacelsus
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2537
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline
Mood: Double, double, toil and trouble
|
|
Simply dissolving boric acid in methanol produces a solution that will burn green. No sulfuric acid is needed.
|
|
Amos
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1406
Registered: 25-3-2014
Location: Yes
Member Is Offline
Mood: No
|
|
There you go. No chemistry needed.
|
|
DalisAndy
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 129
Registered: 8-5-2015
Member Is Offline
Mood: No Mood
|
|
I'm not going for the pyrotechnics. I'm doing Spirit Lantern Pumpkins
Elements Collected: 19/81 (Excluding all radioactive, using placecard for those)
Any tips or good sources are welcome.
|
|