Korialstrasz69
Harmless
Posts: 34
Registered: 23-9-2015
Member Is Offline
Mood: No Mood
|
|
MgSO4 to MgO
Yeah.and preferably by wet chemical ways(if possible).thanks ahead.
EDIT:Sorry forgot to mention,i want good purity stuff.if possible too.
[Edited on 2-10-2015 by Korialstrasz69]
|
|
|
unionised
International Hazard
Posts: 5128
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
Wet chemistry probably isn't an option because MgO reacts with water.
In principle, heating to a very high temperature will cause MgSO4 to decompose to MgO and SO3 but the temperature needed is very high, near 1100 C.
Dissolving the MgSO4 in water and adding NaOH solution or Na2CO3 solution will precipitate the Mg as the hydroxide or carbonate.
You can then filter those off and wash them then heat them to get the oxide.
The carbonate decomposes at about 900C
The hydroxide decomposes at a much lower temperature. About 330 - 400C will do the job, but the precipitating agent (NaOH) is more hazardous to work
with.
If you are really concerned about purity this might help
http://pubs.rsc.org/en/content/articlelanding/1962/tf/tf9625...
|
|
|
Detonationology
Hazard to Others
Posts: 362
Registered: 5-5-2015
Location: Deep South
Member Is Offline
Mood: Electrophillic
|
|
Make a super saturated solution of magnesium sulfate and another using a metal carbonate (no solids). Mix together, and the precipitate will be
MgCO3, since MgCO3 is 2700x less soluble MgSO4. Then, simply heat the MgCO3 in order to release CO2 and the MgO.
“There are no differences but differences of degree between different degrees of difference and no difference.” ― William James
|
|
|
deltaH
Dangerous source of unreferenced speculation
Posts: 1663
Registered: 30-9-2013
Location: South Africa
Member Is Offline
Mood: Heavily protonated
|
|
Magnesium hydroxide calcines at a lower temperature than the carbonate (332°C), so perhaps better to precipitate the hydroxide using something like
sodium hydroxide, although filtering and washing the hydroxide might be considerably harder than the carbonate.
|
|
|
blogfast25
International Hazard
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by deltaH  | | Magnesium hydroxide calcines at a lower temperature than the carbonate (332°C), so perhaps better to precipitate the hydroxide using something like
sodium hydroxide, although filtering and washing the hydroxide might be considerably harder than the carbonate. |
Even better: ammonia. Ammonium salts wash out more easily and traces of them sublime off on calcining.
|
|
|
Detonationology
Hazard to Others
Posts: 362
Registered: 5-5-2015
Location: Deep South
Member Is Offline
Mood: Electrophillic
|
|
The OP is from Syria. Please be mindful that not all "common" reagents are available to many people in war-torn areas.
[Edited on 10-2-2015 by Detonationology]
“There are no differences but differences of degree between different degrees of difference and no difference.” ― William James
|
|
|
deltaH
Dangerous source of unreferenced speculation
Posts: 1663
Registered: 30-9-2013
Location: South Africa
Member Is Offline
Mood: Heavily protonated
|
|
| Quote: Originally posted by Detonationology | The OP is from Syria. Please be mindful that not all "common" reagents are available to many people in war-torn areas.
[Edited on 10-2-2015 by Detonationology] |
Hmm, meaning ammonia?
|
|
|
Detonationology
Hazard to Others
Posts: 362
Registered: 5-5-2015
Location: Deep South
Member Is Offline
Mood: Electrophillic
|
|
In a the "HELP(sulfuric acid)" thread posted by the OP here, I believe that he already attempted to get NH3 from ammonium sulfate using a microwave
and said
| Quote: |
"i have already dealt with hot ammonia in my fucking kitchen..."
|
It's only an assumption, but I don't think that he enjoys working with ammonia.
“There are no differences but differences of degree between different degrees of difference and no difference.” ― William James
|
|
|
ave369
Eastern European Lady of Mad Science
Posts: 596
Registered: 8-7-2015
Location: No Location
Member Is Offline
Mood: No Mood
|
|
Second that. Magnesium hydroxide precipitates as white snot-like mucus that covers any filter with a slimy film and clogs it instantly. Vacuum does
not help.
[Edited on 2-10-2015 by ave369]
Smells like ammonia....
|
|
|
Detonationology
Hazard to Others
Posts: 362
Registered: 5-5-2015
Location: Deep South
Member Is Offline
Mood: Electrophillic
|
|
Gotta hate that Milk of Magnesia! Yuck! Anyway, just from analyzing the chemicals that the OP has identified as available to him, it seems to me
that the epsom salt + baking soda to yield magnesium hydrogen carbonate, which can easily be decomposed at ~300˚C seems to be the most viable method,
yet not very pure since sodium sulfate isn't very soluble either.
[Edited on 10-2-2015 by Detonationology]
[Edited on 10-3-2015 by Detonationology]
“There are no differences but differences of degree between different degrees of difference and no difference.” ― William James
|
|
|
Korialstrasz69
Harmless
Posts: 34
Registered: 23-9-2015
Member Is Offline
Mood: No Mood
|
|
Thanks everybody.
"The hydroxide decomposes at a much lower temperature. About 330 - 400C will do the job, but the precipitating agent (NaOH) is more hazardous to work
with"
i do have NaOH and can probably deal with it,but i have some problems with filtering since i filter with ordinary tissue(Yes.).any advice about
filtering ?
and yes i hate ammonia so much the kitchen now smells like ammonia it's disgusting.
|
|
|
ave369
Eastern European Lady of Mad Science
Posts: 596
Registered: 8-7-2015
Location: No Location
Member Is Offline
Mood: No Mood
|
|
If so, stay away from magnesium hydroxide. You will not be able to filter it off. I use a Buchner set, and still have problems with it.
Smells like ammonia....
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
