Upsilon
Hazard to Others
Posts: 392
Registered: 6-10-2013
Member Is Offline
Mood: No Mood
|
|
Making nitric acid from oxalic acid?
This seems too straightforward to be correct - can you really make cheap, easy nitric acid of high purity with oxalic acid and calcium nitrate? If I
mix stoichiometric solutions of each together, a double replacement reaction should occur, and the resulting calcium oxalate should precipitate out
(it has a solubility of about 7 mg/L), leaving a nitric acid solution. Would this not be possible though, since nitrate has a higher reduction
potential than oxalate, causing the nitric acid to just eat up the calcium oxalate?
I'm asking because I'm going to be receiving some oxalic acid in a few days, and I'm trying to find an alternative to my current method of using
sulfuric acid on calcium nitrate (calcium sulfate is very poorly soluble but still slightly so, and I'm trying to get the nitric acid as clean as
possible without messing with distillation).
|
|
|
DraconicAcid
International Hazard
Posts: 4356
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
This would only work to give dilute nitric acid, as oxalates will dissolve in acidic solution.
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
|
Upsilon
Hazard to Others
Posts: 392
Registered: 6-10-2013
Member Is Offline
Mood: No Mood
|
|
So it's as I suspected then. Looks like I'm sticking with calcium nitrate + sulfuric acid for now.
|
|
|
hyfalcon
International Hazard
Posts: 1003
Registered: 29-3-2012
Member Is Offline
Mood: No Mood
|
|
Have fun cleaning your reaction vessel. Stuff will set up like concrete in a RBF.
|
|
|
Bert
Super Administrator
Posts: 2821
Registered: 12-3-2004
Member Is Offline
Mood: " I think we are all going to die. I think that love is an illusion. We are flawed, my darling".
|
|
| Quote: |
I'm trying to get the nitric acid as clean as possible without messing with distillation.
|
Probably your simplest method for high purity is bubbling nitrogen dioxide into chilled water, or better yet, chilled Hydrogen peroxide.
http://m.instructables.com/id/Make-Nitric-acid-The-Complete-...
Of course, the next questions you will ask are going to be on how to get a high CONCENTRATION. Then you're going to be distilling nitric acid anyhow.
Rapopart’s Rules for critical commentary:
1. Attempt to re-express your target’s position so clearly, vividly and fairly that your target says: “Thanks, I wish I’d thought of putting it
that way.”
2. List any points of agreement (especially if they are not matters of general or widespread agreement).
3. Mention anything you have learned from your target.
4. Only then are you permitted to say so much as a word of rebuttal or criticism.
Anatol Rapoport was a Russian-born American mathematical psychologist (1911-2007).
|
|
|
Bert
|
Thread Moved
16-9-2015 at 04:38 |
Mesa
Hazard to Others
Posts: 264
Registered: 2-7-2013
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by Bert  |
| Quote: |
I'm trying to get the nitric acid as clean as possible without messing with distillation.
|
Probably your simplest method for high purity is bubbling nitrogen dioxide into chilled water, or better yet, chilled Hydrogen peroxide.
|
I thought this gave significant amounts of lower oxides etc. in the final product(isn't that why conc. nitric acid is often coloured red?)
|
|
|
Detonationology
Hazard to Others
Posts: 362
Registered: 5-5-2015
Location: Deep South
Member Is Offline
Mood: Electrophillic
|
|
Although CaSO4 is nearly insoluble, an even better option would be to precipitate BaSO4 or PbSO4, which have very minute Ksp values. Not only is
Ba(NO3)2 the best candidate chemically IMO, it is quite cheap and accessible.
|
|
|
Detonationology
Hazard to Others
Posts: 362
Registered: 5-5-2015
Location: Deep South
Member Is Offline
Mood: Electrophillic
|
|
Although CaSO4 is nearly insoluble, an even better option would be to precipitate BaSO4 or PbSO4, which have very minute Ksp values. Not only is
Ba(NO3)2 the best candidate chemically IMO, it is quite cheap and accessible.
|
|
|
Upsilon
Hazard to Others
Posts: 392
Registered: 6-10-2013
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by Detonationology |
Although CaSO4 is nearly insoluble, an even better option would be to precipitate BaSO4 or PbSO4, which have very minute Ksp values. Not only is
Ba(NO3)2 the best candidate chemically IMO, it is quite cheap and accessible. |
I have considered this, but barium nitrate is still quite expensive when compared to calcium nitrate. The cheapest I see on eBay is almost $30 for
500g. I can get 5 pounds of calcium nitrate for half that cost.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
