khlor
Hazard to Self
Posts: 95
Registered: 4-1-2014
Location: Who knows, really...
Member Is Offline
Mood: No Mood
|
|
Electricity
Hello everyone, I'm new here. so, sorry if this topic is in the worng place or even in the wrong forum but any way, let's get started.
I was wondering if there is a cheap way to get usable electricity from galvanic cells, air batteries or thermocouples/thermopiles to make
electrolysis. I just do want to know if is it possible and/or how. if you know any other way please tell me or if you know something about what I said
above please say.
note: I made a little search and wikipedia just dont provide the information I can use.
|
|
|
DraconicAcid
International Hazard
Posts: 4355
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
When I was young, I found the best way to do electrolysis was to use the transformer that came with my train set.
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
|
quantumchromodynamics
Hazard to Self
Posts: 67
Registered: 25-9-2013
Location: with much determination, nowhere in particluar
Member Is Offline
Mood: tired but still trying
|
|
24V transformer and a variac
Get a honker 24V 10A transformer and a smallish 300 Watt variac off ebay. Use the variac to control the input voltage to the transformer. Use a 10A
bridge rectifier to get pseudo DC from the transformer output.
Variac -> Transformer -> DC Bridge Rectifier
You can build a very strong supply for < $60 bucks.
approx costs:
Variac -- $30
Transfomer -- $20
Bridge -- $10
|
|
|
bfesser
|
Thread Moved
5-1-2014 at 06:34 |
khlor
Hazard to Self
Posts: 95
Registered: 4-1-2014
Location: Who knows, really...
Member Is Offline
Mood: No Mood
|
|
good. but I was asking for some sort of generator
|
|
|
quantumchromodynamics
Hazard to Self
Posts: 67
Registered: 25-9-2013
Location: with much determination, nowhere in particluar
Member Is Offline
Mood: tired but still trying
|
|
car battery
A cheap voltaic pile? How about a car battery and an assortment of hi watt low ohm resistors? For that matter, maybe you could make electrolysis work
with a massive potato battery network! In that case lots of experiments with series and parallel potatoes will be necessary in order to adjust the
current and voltage. Wind power? How about an airplane blade attached to an old car alternator. Old alternators have magnetic stater, with the coils
on the commutator, as opposed to the modern ones that have coils on the stater as well. To make a generator out of a motor you really want a permanent
magnetic stater. You could go Tesla style. Are you near Niagra falls? How about the big chunk of plutonium attached to the last mars rover? 
[Edited on 26-1-2014 by quantumchromodynamics]
|
|
|
vmelkon
National Hazard
Posts: 669
Registered: 25-11-2011
Location: Canada
Member Is Offline
Mood: autoerotic asphyxiation
|
|
If you want galvanic cells, I agree, a car battery is a good source. It gives 12 to 14 V. Just make sure you don't fully discharge it since it isn't
good.
Or, get a car battery charger which is what I have. It has switches. It can give 6 V, 10 V, 13 V.
Thermopiles aren't efficient. You can make one from many copper and iron connections and light a LED as one guy did on Youtube.
Perhaps you can get a solar cell. You are in brazil, so you have lots of sun. I would not go this route either. Can't get a lot of amps from solar.
An old computer ATX power supply can be converted easily to a normal power supply.
|
|
|
khlor
Hazard to Self
Posts: 95
Registered: 4-1-2014
Location: Who knows, really...
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by vmelkon  | If you want galvanic cells, I agree, a car battery is a good source. It gives 12 to 14 V. Just make sure you don't fully discharge it since it isn't
good.
Or, get a car battery charger which is what I have. It has switches. It can give 6 V, 10 V, 13 V.
Thermopiles aren't efficient. You can make one from many copper and iron connections and light a LED as one guy did on Youtube.
Perhaps you can get a solar cell. You are in brazil, so you have lots of sun. I would not go this route either. Can't get a lot of amps from solar.
An old computer ATX power supply can be converted easily to a normal power supply. |
I like the idea of thermopile, for some time I was searching for it. once I found that a huge thermopile could give me the ampers I want. but still
isn't efficient. and about solar cells, yes, the idea is interesting because here there is lots of sun. and the hours of sun per day is a good deal.
but the process is very slow, because as you said don't give me many ampers. and about a car battery is interesting. I'm thinking in go for it. but
this just store power, I wanna a way to produce it. I was thinking about the idea of a cheap voltaic pile. or others soucers to recharge the car
battery since I can charge it in many ways, some ways just take a long time to charge. but the output is good. as by now I'm low on money I would like
something inexpensive to run my experimentations.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
