foambastus
Harmless
Posts: 3
Registered: 7-4-2013
Member Is Offline
Mood: No Mood
|
|
distilling without grease glass joints
Hi everybody! I am brand new here and I have a couple of questions for you experts.
What can I use instead of grease (in glass joints) to distill alcohol from a spirit?
And changing topic: is it true that for distillation of nitric acid from kno3 and H2SO4 I can use H2SO4 as lubricant in glass joints?
Thank you for your help!
|
|
hissingnoise
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3940
Registered: 26-12-2002
Member Is Offline
Mood: Pulverulescent!
|
|
Glindemann Rings?
PTFE, they'll stand up to anything . . .
|
|
confused
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 244
Registered: 17-3-2013
Location: Singapore
Member Is Offline
Mood: tired
|
|
probably not reccomended, but is it possible to distill without the grease?
you can try silicon grease from the hardware store...from what i know it should not react with the alcohol, but you might want to check with some of
the other members here
|
|
hyfalcon
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1003
Registered: 29-3-2012
Member Is Offline
Mood: No Mood
|
|
When distilling nitric acid you can use H2SO4 for lube on the ground glass joints of your setup.
|
|
hissingnoise
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 3940
Registered: 26-12-2002
Member Is Offline
Mood: Pulverulescent!
|
|
Glindemann rings are so fucking easily misplaced that I tend to fall back on the old teflon tape . . .
|
|
chemrox
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2961
Registered: 18-1-2007
Location: UTM
Member Is Offline
Mood: LaGrangian
|
|
If you must have something in the joints use Teflon sleeves. Unless the joints are mismatched you shouldn't need a lubricant at ambient pressures.
"When you let the dumbasses vote you end up with populism followed by autocracy and getting back is a bitch." Plato (sort of)
|
|
vmelkon
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 669
Registered: 25-11-2011
Location: Canada
Member Is Offline
Mood: autoerotic asphyxiation
|
|
Are you going to distill ethanol? I don't use anything. The ethanol wets the joint and forms a joint. There aren't large losses from the joints.
|
|
foambastus
Harmless
Posts: 3
Registered: 7-4-2013
Member Is Offline
Mood: No Mood
|
|
Thank you everybody!
So, to summarize: to distill alcohol at ambient pressure I don't need lubricant and there are no risks of "frozen joints"
And I can use H2SO4 as lube for the HNO3 synthesis. Excellent..
Another question: for other experments is it possible to use the teflon tape (used by plumbers) instead of Glindemann ptfe? (I do not want to spend
money for now...)
|
|
elementcollector1
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2684
Registered: 28-12-2011
Location: The Known Universe
Member Is Offline
Mood: Molten
|
|
Use vaseline.
Elements Collected:52/87
Latest Acquired: Cl
Next in Line: Nd
|
|
Hexavalent
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1564
Registered: 29-12-2011
Location: Wales, UK
Member Is Offline
Mood: Pericyclic
|
|
I concur. I've always used vaseline/petroleum jelly when lubrication was necessary, and have never had any issues with contamination of the substance
I was refluxing/distilling.
"Success is going from failure to failure without loss of enthusiasm." Winston Churchill
|
|
woelen
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7991
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
Quote: Originally posted by foambastus ![](images/xpblue/lastpost.gif) | Thank you everybody!
And I can use H2SO4 as lube for the HNO3 synthesis. Excellent..
Another question: for other experments is it possible to use the teflon tape (used by plumbers) instead of Glindemann ptfe? (I do not want to spend
money for now...) |
You can use H2SO4 as lube for HNO3 distillation, but you can also leave out the lube. Some HNO3 will wet the joins and no further HNO3 escapes the
system. You just need to use good clamps to keep the joins connecting well.
If you use vacuum distillation for the HNO3 then you may need some lube, otherwise air may flow through the joins and the joins may get stuck.
|
|
foambastus
Harmless
Posts: 3
Registered: 7-4-2013
Member Is Offline
Mood: No Mood
|
|
Clear now, thanks.
The ethanol distillation was good without any lubricant.
|
|
Sciocrat
Harmless
Posts: 36
Registered: 30-3-2007
Member Is Offline
Mood: Scientifically curious
|
|
I usually use vaseline or no form of grease at all, and didn't have any problems so far.
|
|
MrHomeScientist
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1806
Registered: 24-10-2010
Location: Flerovium
Member Is Offline
Mood: No Mood
|
|
I use silicone grease from the hardware store, used to lubricate some part of a faucet fixture (I found it in the sink parts section, anyway). Also
remember that if you do use grease, you only need to use it on the joints where vapor is present. I.e. after the condenser you shouldn't need any. I
usually do anyway, since it only uses such a tiny amount.
|
|
Mailinmypocket
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1351
Registered: 12-5-2011
Member Is Offline
Mood: No Mood
|
|
Look in the auto parts section of a hardware store or a NAPA or anywhere else where you can buy electronic car equipment (headlights, stereo wiring,
etc) and find some silicone dielectric grease. It is extremely inert to everything I've thrown at it, I have had problems with petroleum grease like
Vaseline with certain solvents...
It's cheap and will last you forever!
http://www.permatex.com/products/product-categories/speciali...
|
|