Pumukli
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 693
Registered: 2-3-2014
Location: EU
Member Is Offline
Mood: No Mood
|
|
Bromine monochloride
I was wondering wether it would be possible to make BrCl from TCCA and a bromide salt plus acid in a similar fashion as chlorine can be generated from
TCCA and HCl soln. ?
Is it a walkable path? Has anyone tried it yet? Drawbacks?
|
|
Gooferking Science
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 97
Registered: 17-7-2013
Location: Somewhere in Kansas, USA...
Member Is Offline
Mood: Halogenated
|
|
I can honestly say I'm a bromine expert. I have worked with it many times, so I feel I can reliably answer you. Using the chemicals you described
would make trace amounts of BrCl, but it would basically just make elemental bromine. In fact, the mixture of those chemicals is a viable synthesis of
bromine. You would just need to distill it. That being said, I would be interested in making BrCl. I will see if I can find a good procedure for
making it.
EDIT:
I can't find a good way to make BrCl, and from my research it appears to be an unstable molecule. It doesn't have many uses either...
[Edited on 12-7-2015 by Gooferking Science]
|
|
Volanschemia
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 340
Registered: 16-1-2015
Location: Victoria, Australia
Member Is Offline
Mood: Pretty much all of them!
|
|
It's actually a very good method of making elemental Bromine. In fact, I performed the isolation myself two days ago. BrCl is formed, but in very
small amounts when the HCl is added dropwise by use of an addition funnel. It may be possible to recover any BrCl formed, by simple distillation at
very low temperatures as BrCl boils at 3C.
"The chemists are a strange class of mortals, impelled by an almost insane impulse to seek their pleasures amid smoke and
vapor, soot and flame, poisons and poverty; yet among all these evils I seem to live so sweetly that may I die if I were to change places with the
Persian king" - Johann Joachim Becher, 1635 to 1682.
|
|
woelen
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7988
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
You make BrCl as long as there is no excess of bromide. Any excess of bromide will lead to formation of bromine and chloride ions.
|
|
CuReUS
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 928
Registered: 9-9-2014
Member Is Offline
Mood: No Mood
|
|
can't you just make it by passing chlorine through bromine.I thought inter halogen compounds could be made just by mixing both the halogens.
|
|
Gooferking Science
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 97
Registered: 17-7-2013
Location: Somewhere in Kansas, USA...
Member Is Offline
Mood: Halogenated
|
|
Quote: Originally posted by CuReUS ![](images/xpblue/lastpost.gif) | can't you just make it by passing chlorine through bromine.I thought inter halogen compounds could be made just by mixing both the halogens.
|
That's what i thought too. Couldn't you just fill a flask with bromine vapor and pass chlorine through it? Or would the bromine stay as Br2 rather
than bonding with the chlorine?
|
|
Pumukli
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 693
Registered: 2-3-2014
Location: EU
Member Is Offline
Mood: No Mood
|
|
Thanks for the input(s). :-)
Something about the background of the original question: I decided that I'd need a particular Br-Cl-alkane. The easiest route to this compound seemed
to be the addition of BrCl to a precursor alkene. (Being a symmetrical one the appearance of isomers is fortunately not a problem, all the reaction
products are the same.)
I love OTC synths and as I already have TCCA and NaBr on the shelves I thought it might work.
Exactly as Woelen wrote: I thought of balancing the ammounts and avoid Br- excess. The forming BrCl gas would be swiftly consumed in the addition
reaction, so its short shelf-life does not count either.
So Woelen, if I used a slight excess of TCCA (just to be on the safe side), thoroughly mixed the solid, dry reactants (ball mill maybe?) and then
slowly introduced some dilute sulfuric acid (to get a stirrable slurry and not a solid crystall mass) then (maybe) introduced some overpressure from
an aquarium air pump to continuously expell the forming BrCl and bubbled it into the solution of the alkene (inert solvent) then may I get what I
wanted? ;-)
|
|
woelen
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7988
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
It will be hard to obtain precisely BrCl in this way. I can imagine that not all Cl2 reacts with the bromide and that you get BrCl, mixed with Cl2.
Also keep in mind that your method gives humid BrCl. Whether that is a problem or not depends on your reaction. Probably it will do no harm for the
reaction itself, but workup/purification may become harder in the presence of water.
Another way of making BrCl of more precise composition is to put Cl2 in a bottle of known volume. You then can compute how much Cl2 you have and then
you can compute how much Br2 you need to react with the Cl2. E.g. if you use 1 liter of Cl2 at room temperature, you have appr. 0.041 mole of Cl2.
This method also is not without complication. You have to add the Br2 to the Cl2 with at little as possible loss of gas and you have to keep in mind
that the pressure increases (BrCl is a gas at room temperature) when the Br2 reacts with the Cl2.
|
|
Pumukli
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 693
Registered: 2-3-2014
Location: EU
Member Is Offline
Mood: No Mood
|
|
Umm, I was expecting something like this. I mean the not quantitative conversion.
Anyway, I think the reaction products that would arise from the addition could be separated by distillation. There is about 45 Celsius difference in
b.p. of dichloro-alkane and dibromo-alkane so bromo-chloro-alkane should be somewhere halfway in between. :-)
Thanks!
|
|
annaandherdad
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 387
Registered: 17-9-2011
Member Is Offline
Mood: No Mood
|
|
woelen is too modest to tell you that he has a photo of this process. It's on a very interesting thread on this forum,
http://www.sciencemadness.org/talk/viewthread.php?tid=9690
Just google on "sciencemadness bromine chloride"
Any other SF Bay chemists?
|
|
Metacelsus
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2537
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline
Mood: Double, double, toil and trouble
|
|
Could you try forming a halohydrin (chlorohydrin) instead, and then reacting with hydrobromic acid to form the desired compound?
[Edited on 14-7-2015 by Cheddite Cheese]
|
|
Pumukli
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 693
Registered: 2-3-2014
Location: EU
Member Is Offline
Mood: No Mood
|
|
Ahh, a halohydrine!
It may work, actually I overlooked this route because I was so excited by the chance to generate/use BrCl. :-)
I will explore this more thoroughly because it may work. Thanks for the tip!
|
|
CuReUS
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 928
Registered: 9-9-2014
Member Is Offline
Mood: No Mood
|
|
there might be some problems with the halohydrin route
1.OH- is a good nucleophile.Br- ion won't be able to replace it unless the conc of HBr is high(70%).normal HBr is 48%.azeotrophe
2.you would have to use dry HBr gas,as the water present in HBr will give OH- ,that might replace the Cl- of the halohydrin to give a diol,which under
acidic conditions(due to the HBr)might lead to a pinacol rearrangement.
you could try using HBr dissolved in GAA.
BTW,this thread might be useful
http://www.sciencemadness.org/talk/viewthread.php?tid=1091
|
|
Nicodem
Super Moderator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4230
Registered: 28-12-2004
Member Is Offline
Mood: No Mood
|
|
CuReUS, instead of resorting to groundless arguments, try referring to the literature instead. People have been using 48% HBr(aq) for over a century
to prepare alkyl bromides from the corresponding alcohols. It does not even need to be that concentrated, as long as you give it some more reaction
time and temperature. Actually, it does not even need to be HBr, as one can use aq. H2SO4 and a bromide salt. See the numerous
examples posted on this forum.
BrCl can be prepared from TCCA and bromine, but the literature example is a bit of no go for the average chemist. It requires heating up bromine with
TCCA in a closed vessel! See the attached article Monatshafte für Chemie, 103, 1150-1157 (1972). I might guess that this could be performed
at normal conditions by using a suitable solvent like dichloromethane (which does not dissolve much TCCA) or acetonitrile (not completely inert to
TCCA, but at least it dissolves it well).
Aqueous BrCl is easily prepared from KBrO3, KBr and HCl(aq) by using the appropriate stoichiometry of bromide/bromate (such a solution will
contain also excess HCl and KCl). See Chem. Abstr. 54: 67142 cited here:
Quote: | Preparation and testing of BrCl solution
Schulek, Elemer; Burger, Kalman
A 0.1N BrCl soln. was prepd. from stoichiometric amts. of KBrO3 and KBr in the presence of excess HCl soln. After 3 months storage in the
dark the BrCl content was only 3-5% lower. The BrO3-, Br2, and Cl2 contents of the BrCl soln.
were detd.
Magyar Tudomanyos Akad. Kem. Tudomanyok Osztalyanak Kolzemenyei, 12, 9-14 (1959) |
Attachment: TBCA.pdf (408kB) This file has been downloaded 602 times
…there is a human touch of the cultist “believer” in every theorist that he must struggle against as being
unworthy of the scientist. Some of the greatest men of science have publicly repudiated a theory which earlier they hotly defended. In this lies their
scientific temper, not in the scientific defense of the theory. - Weston La Barre (Ghost Dance, 1972)
Read the The ScienceMadness Guidelines!
|
|
CuReUS
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 928
Registered: 9-9-2014
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by Nicodem ![](images/xpblue/lastpost.gif) | People have been using 48% HBr(aq) for over a century to prepare alkyl bromides from the corresponding alcohols. |
would you be kind enough to provide a reference ?
Quote: | Actually, it does not even need to be HBr, as one can use aq. H2SO4 and a bromide salt. See the numerous examples posted on
this forum. |
even I know that H2SO4 and a bromide salt will work.The trick there is that H2SO4 will dehydrate any
alcohol that might form so that Br- has another chance to add to the alkene.
|
|
Nicodem
Super Moderator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4230
Registered: 28-12-2004
Member Is Offline
Mood: No Mood
|
|
There are more than 2000 references for the nucleophilic bromination of alcohols with aqueous HBr, so I hope you don't expect me to select one out of
them all. It is pretty much a method of choice for some chemists, particularly if the substrate is soluble in that acid. Even I used it on a couple of
substrates in my work (and I rarely need to brominate alcohols). If the substrate has poor solubility, acetic acid can be used as a cosolvent,* though
it does work, albeit more slowly, also under biphasic conditions (see about 3-phenylpropanol). Alternatively, on liquid alcohols, gaseous HBr can be used directly.
* Like in the Org. Synth. example of monobromopentaerythritol, though there the acetic acid may have another role (selectivity issue). As
noted in the Discussion part, the reaction works also without acetic acid.
Quote: | even I know that H2SO4 and a bromide salt will work.The trick there is that H2SO4 will dehydrate any
alcohol that might form so that Br- has another chance to add to the alkene. |
Unless you provide a reference demonstrating this is supposed to be the prevalent pathway on simple aliphatic alcohols, I will consider that as
another groundless argument. If what you said was the case, then such a reaction would not work as well on primary alcohols such as ethanol at the
conditions it does, and it would not work at all on methanol or other alcohols lacking a beta-hydrogen (unless trough a different mechanism). It works
excellently on both as testified by posts on this forum and the literature examples. Besides, if that was the case, the reaction on
iso-butanol would have to give tert-butyl bromide as the sole product. Instead the main product is isobutyl bromide (DOI:
10.1080/00304948809355804). Furthermore, the sulfuric acid with bromide method works best in the presence of some water (see discussions and
references posted on this forum), which goes against any elimination promoting role of sulfuric acid. Not to mention, that on most substrates the
addition of HBr on alkenes does not necessarily go faster than the SN2 of HBr on alcohols, so what point is there to even invoke an
elimination-addition mechanism in the first place? It is reasonable for tertiary alcohols, but certainly not for primary alcohols.
Paradoxically, at least for iso-butanol, the only evidence of a presumably elimination-addition pathway that I could find, was the reaction
not in the presence of sulfuric acid, but rather with HBr gas (WO2010104742). Apparently, under non-optimal conditions, up to 10%
tert-butyl bromide forms. Since SN1 is not possible on simple primary alcohols like iso-butanol, the most likely
explanation for the formation of tert-butyl bromide is the elimination-addition pathway.
…there is a human touch of the cultist “believer” in every theorist that he must struggle against as being
unworthy of the scientist. Some of the greatest men of science have publicly repudiated a theory which earlier they hotly defended. In this lies their
scientific temper, not in the scientific defense of the theory. - Weston La Barre (Ghost Dance, 1972)
Read the The ScienceMadness Guidelines!
|
|
CuReUS
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 928
Registered: 9-9-2014
Member Is Offline
Mood: No Mood
|
|
I am sorry,I should have double checked.After your post yesterday,I immediately checked Vogel,and there was a procedure for converting secondary OH
to Br using constant boiling HBr(48%) at reflux without H2SO4.
H2SO4 was used to convert a primary OH to Br.
also I found that they use sulphuric acid to make the OH a better leaving group,not a dehydrating agent,as I thought.So you are right
http://www.orgsyn.org/demo.aspx?prep=CV1P0025
|
|
Pumukli
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 693
Registered: 2-3-2014
Location: EU
Member Is Offline
Mood: No Mood
|
|
Nicodem, thanks for the tip!
The aqueous solution of BrCl seems interesting. The HCl excess may not cause harm because even if it would add to the olefine bond the resulting
monochloro-alkan had way lower boiling point than the required bromo-chloro variety.
As a sidenote: I always enjoy your posts, especially those where you cite something. It makes me wonder HOW do you find those articles!? I'm sitting
in the middle of nowhere in the rural countryside (where fortunately high-speed internet is available), far from university libraries and wondering
whether I could have find that aqueous BrCl synth if I knew where and how to look for or you have something more than a naked internet connection?
|
|
chornedsnorkack
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 552
Registered: 16-2-2012
Member Is Offline
Mood: No Mood
|
|
How easy is it to purify liquid BrCl?
The boiling points are
Cl2 - -34 degrees
BrCl - +5 degrees (39 degrees higher)
Br2 - +58 degrees (53 degrees higher).
Can fractional distillation give pure liquid BrCl? Or is it unstable and decompose as the other fractions are drawn off:
2BrCl<->Cl2+Br2
|
|