elementcollector1
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2684
Registered: 28-12-2011
Location: The Known Universe
Member Is Offline
Mood: Molten
|
|
Deuterium!
A friend of mine (SWIM? Ha ha.) is looking to build a device to generate him some deuterium. Now, the current idea is to electrolyze massive amounts
of water and separate the deuterium from the hydrogen. I think this isn't too good of an idea, because the scale of this machine would have to be huge
to get any significant quantity of deuterium. So, my idea is to irradiate hydrogen or water with neutrons from an alpha source (Am-241) and a neutron
emittor (Be metal). I don't think this would work, as this seems almost too easy. But whose method is better, and why?
(This is in Beginnings because I basically am speculating from my armchair. No, my chair does not have armrests.)
Elements Collected:52/87
Latest Acquired: Cl
Next in Line: Nd
|
|
woelen
Super Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 7988
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
I think that in a home setting it simply is impossible to make deuterium. If you have an alpha-source (like Am-241), then how much do you have? A few
micrograms? At most a few nanomole of atoms. From these atoms you may be capable of making a few nanomole of neutrons and you may be capable of
directing a few percent of these neutrons into your reaction vessel. So, even if the reaction is 100% efficient, you may obtain a few hundreds of
picomoles of deuterium atoms. Even in a ml of plain tap water you already have more deuterium atoms (IIRC appr. 0.02% of all hydrogen atoms are
deuterium atoms).
The only viable way is separation by means of electrolysis. But you need to do the electrolysis hundreds or even thousands of time, starting with
tonnes of material, and ending with a few hundreds of ml of heavy water. At an industrial scale this is possible and it is possible to make deuterium
at a cost of a few euros (dollars) per gram, but in a home setting it is impossible to do this.
|
|
phlogiston
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1377
Registered: 26-4-2008
Location: Neon Thorium Erbium Lanthanum Neodymium Sulphur
Member Is Offline
Mood: pyrophoric
|
|
There are other methods than electrolysis that are faster.
To make small quantities in an amateur scientist setting, you should focus on methods that give the most enrichment per step, and not so much on
energy efficiency. Some chemical reactions have a strong isotope effect.
Look up the Girdler sulfide (GS) process for instance, but there are probably other ways.
[Edited on 18-3-2013 by phlogiston]
-----
"If a rocket goes up, who cares where it comes down, that's not my concern said Wernher von Braun" - Tom Lehrer
|
|
elementcollector1
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2684
Registered: 28-12-2011
Location: The Known Universe
Member Is Offline
Mood: Molten
|
|
Girdler sulfide method sounds interesting, but Wiki states that it only enriches deuterium content up to 20%, and the rest of the stuff has to be
purified by vacuum distillation.
Elements Collected:52/87
Latest Acquired: Cl
Next in Line: Nd
|
|
IrC
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2710
Registered: 7-3-2005
Location: Eureka
Member Is Offline
Mood: Discovering
|
|
I would add to Woelen's comment the fact that roughly one neutron is produced for every 30 million Alpha's making the result even worse. I built a few
generators using smoke detector Am and Be foil. One day I got tired of looking through a massive pile of boxes as I stored them years ago and I
thought maybe I could find the box with my Neutron detector. Ended up finding them the hard way after that idea failed. They just do not emit all that
many Neutrons and I could not see the difference between them and the random false pulses my BF3 tubes produce from Gamma's.
Elementcollector1 "A friend of mine (SWIM? Ha ha.) is looking to build a device to generate him some deuterium."
This just hit me. Damn that really is funny!
[Edited on 3-19-2013 by IrC]
"Science is the belief in the ignorance of the experts" Richard Feynman
|
|
elementcollector1
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2684
Registered: 28-12-2011
Location: The Known Universe
Member Is Offline
Mood: Molten
|
|
As I understand it, the H2S (carrying deuterium) runs from the pressurized, hot water solution to the cold solution. What if I used a lot of hot
water, and only a small amount of cold water: Would this allow higher concentrations, or have no effect? I think it would allow for higher
concentrations.
Elements Collected:52/87
Latest Acquired: Cl
Next in Line: Nd
|
|
watson.fawkes
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2793
Registered: 16-8-2008
Member Is Offline
Mood: No Mood
|
|
There's a recent thread on deuterium enrichment: https://www.sciencemadness.org/whisper/viewthread.php?tid=22897. Quote: Originally posted by elementcollector1 ![](images/xpblue/lastpost.gif) | Girdler sulfide method sounds interesting, but Wiki states that it only enriches deuterium content up to 20%, and the rest of the stuff has to be
purified by vacuum distillation. | That's not what it says. Quote: | Normally in this process, water is enriched to 15–20% deuterium. Further enrichment to "reactor-grade" heavy water (> 99% deuterium) is done in a
vacuum distillation unit. | The second stage doesn't have to be vacuum distillation, rather that it's
normally in two stages. The reason is energy efficiency. Since the boiling point of heavy water (and semi-heavy DHO) is higher than that of
water, if you try distilling raw feedstock, you would have to boil away all the light water to get any enrichment at all. The GS process is more
efficient than that. Separation by distillation, though, can be effective when there's enough deuterium content. At some point there's a tradeoff and
you switch enrichment processes.
|
|
elementcollector1
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2684
Registered: 28-12-2011
Location: The Known Universe
Member Is Offline
Mood: Molten
|
|
Oh, I see. Still, according to the Wiki entry, the feedstock ratio for the GS process is 340 water:1 D2O product. So, if I put in say, 1 gallon of
water, I would get out (assuming they're right, which is a big assumption) 16.25mL of pure D2O. That's actually a fairly good ratio in the sense of
things, but I doubt it'll be the correct one for the home experimenter.
So, couldn't I just continue running the GS process with the same H2S and a continual input of water until I had pure D2O? What cutoff exists in terms
of efficiency for the sulfide process (I'm guessing energy consumption)?
Elements Collected:52/87
Latest Acquired: Cl
Next in Line: Nd
|
|
vmelkon
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 669
Registered: 25-11-2011
Location: Canada
Member Is Offline
Mood: autoerotic asphyxiation
|
|
Quote: Originally posted by elementcollector1 ![](images/xpblue/lastpost.gif) | Oh, I see. Still, according to the Wiki entry, the feedstock ratio for the GS process is 340 water:1 D2O product. So, if I put in say, 1 gallon of
water, I would get out (assuming they're right, which is a big assumption) 16.25mL of pure D2O. That's actually a fairly good ratio in the sense of
things, but I doubt it'll be the correct one for the home experimenter.
So, couldn't I just continue running the GS process with the same H2S and a continual input of water until I had pure D2O? What cutoff exists in terms
of efficiency for the sulfide process (I'm guessing energy consumption)? |
How did you get 16.25 mL?
1 gallon = 3785.411865 mL
16.25mL / 3785.411865 mL = 0.429 %
but deuterium is 0.015% of natural hydrogen.
On top of that, some of the water is DHO. I think I read that if you add 5 mL H2O to 5 mL D2O, 50% ends up as DHO, 25% as H2O, 25% as D2O.
|
|
watson.fawkes
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2793
Registered: 16-8-2008
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by elementcollector1 ![](images/xpblue/lastpost.gif) | [...] according to the Wiki entry, the feedstock ratio for the GS process is 340 water:1 D2O product.
[...]
So, couldn't I just continue running the GS process with the same H2S and a continual input of water until I had pure D2O? What cutoff exists in terms
of efficiency for the sulfide process (I'm guessing energy consumption)? | Read again. That ratio is 340,000 :
1. At 155 ppm D-H fraction, the best you could possibly do is 6450 : 1. So it's only about a factor of 50 less feedstock-efficient, but since the
feedstock is water, it doesn't matter. The energy input is what drives the economics.
I don't have a handy reference for the detailed efficiency of the GS process. On the other hand, isotopic exchange processes generate first-order
differential equations (if I understand the dynamics correctly). So the modelling isn't that hard. Dig into it if you care enough.
|
|
phlogiston
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1377
Registered: 26-4-2008
Location: Neon Thorium Erbium Lanthanum Neodymium Sulphur
Member Is Offline
Mood: pyrophoric
|
|
A guy called Cody seems to have succeeded at this challenge and shared his efforts on youtube in a series of 5 video's. Since the subject has come up
a couple of times, perhaps some of you might find it interesting to watch:
https://www.youtube.com/watch?v=VC4dk1JU4tQ
-----
"If a rocket goes up, who cares where it comes down, that's not my concern said Wernher von Braun" - Tom Lehrer
|
|
neptunium
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 987
Registered: 12-12-2011
Location: between Uranium and Plutonium
Member Is Offline
|
|
Quote: Originally posted by IrC ![](images/xpblue/lastpost.gif) | I would add to Woelen's comment the fact that roughly one neutron is produced for every 30 million Alpha's making the result even worse. I built a few
generators using smoke detector Am and Be foil. One day I got tired of looking through a massive pile of boxes as I stored them years ago and I
thought maybe I could find the box with my Neutron detector. Ended up finding them the hard way after that idea failed. They just do not emit all that
many Neutrons and I could not see the difference between them and the random false pulses my BF3 tubes produce from Gamma's.
[Edited on 3-19-2013 by IrC] |
I`ve seen different variation on the Am/Be source depending on geometry but its pretty much on point.
did the same experiment with the same equipment ! I second the result with the BF3 detector .... nothing much to speak of
|
|
Fenir
Hazard to Self
![*](images/xpblue/star.gif)
Posts: 68
Registered: 7-5-2013
Member Is Offline
Mood: No Mood
|
|
Hydrogen has a very low rate of neutron capture. Deuterium enrichment is simply not efficient enough for useful yields.
|
|
neptunium
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 987
Registered: 12-12-2011
Location: between Uranium and Plutonium
Member Is Offline
|
|
heavy water is not that expensive! an electrolysis shouldn't be impossible...even for a cheap home scientist...
if you really want deuterium it should not be a problem ....
|
|
Marvin
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 995
Registered: 13-10-2002
Member Is Offline
Mood: No Mood
|
|
Roughly 1 per 30'000 I think or around 1 neutron per second from 1uCi of alpha source.
The conclusion still follows.
|
|
Polverone
Now celebrating 21 years of madness
|
Thread Split 3-5-2015 at 19:47 |