ShulginJr
Harmless
Posts: 2
Registered: 18-5-2008
Member Is Offline
Mood: No Mood
|
|
Hand Vacuum Pump Cababilities?
Hey all, this will be my first post after months of reading and browsing this awesome sight. Chemistry has been a long time interest of mine and ive
decided to finally start experimenting. In any event, I've decided to go microscale for safety reasons. One of the first procedures i want to try is
vacuum distillation....however, a vacuum pump is quite pricey and i feel like setting up an aspirator wastes quite a bit of tap water. I have seen
some of the hand pumps which are available for purchase for >$50 and i was wondering if i could sufficiently use this for partial vacuum in vacuum
distillation. Anyways, i know this may sound dumb but really im starting learning from scratch here. I have an organic chemistry text book, and
Zubrick's lab procedures manual. This question is the only one ive had yet, so any help is much appreciated.
If an astronomer can use a telescope to study the solar system.....Why cant a psyconaut use phenethlyamines to study the consciousness?
|
|
chemrox
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2961
Registered: 18-1-2007
Location: UTM
Member Is Offline
Mood: LaGrangian
|
|
You will develop a helluva grip trying to maintain a vacuum that way. Those had pumps get to oh about 710 if you really work your ass off. A Nalgene
aspirator will take you down to 25-30 mm with cold tap water. An "aspirator pump" will do the same. Look on ebay.. keep looking until you find one
and then make sure its working by asking the right questions. I lucked out; I got one for $40 that works great. I also got a Welch 1400 pump that
pulls 1 mm with half-ass hoses and cost me $25 plus shipping (LabX). So be watchful and patient and let go of a few ideals.. distill a small quantity
and you won't use so much water..
"When you let the dumbasses vote you end up with populism followed by autocracy and getting back is a bitch." Plato (sort of)
|
|
S.C. Wack
bibliomaster
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2419
Registered: 7-5-2004
Location: Cornworld, Central USA
Member Is Offline
Mood: Enhanced
|
|
I think that you two are talking about those Harbor Freight thingys widely sold on the internet, but a hand pump such as a tire pump sort of deal is
about as good as an aspirator. But you'd want a steady vacuum for vacuum fractional distillation.
|
|
evil_lurker
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 767
Registered: 12-3-2005
Location: United States of Elbonia
Member Is Offline
Mood: On the wagon again.
|
|
All ya need is a harbor freight 1/2 HP clear water pump, some PVC, hole saws, aspirator, and pressure gauge.
An afternoon of work, and $100 later you have something like this:
![](http://i41.photobucket.com/albums/e257/evil_lurker/Picture2730.jpg)
It'll do 29-30mm on tap water, less than 25 on ice, and even double duties as a condenser coolant pump.
Not all chemicals are bad. Without chemicals such as hydrogen and oxygen, for example, there would be no way to make water, a vital ingredient in
beer.
|
|
Sauron
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 5351
Registered: 22-12-2006
Location: Barad-Dur, Mordor
Member Is Offline
Mood: metastable
|
|
I used to occasionally use a Nalgene hand vacuum pump, with gauge, for filtrations and small scale (like 100 ml) distillations, and found it adequate,
and a great way to exercise your hands.
But a real pump is better. Even an aspirator.
Sic gorgeamus a los subjectatus nunc.
|
|
ShulginJr
Harmless
Posts: 2
Registered: 18-5-2008
Member Is Offline
Mood: No Mood
|
|
hmmmmm I've looked at some of those aspirator pumps on ebay......they look like they are for cleaning dentures or something.....is this what your
talking about?
If an astronomer can use a telescope to study the solar system.....Why cant a psyconaut use phenethlyamines to study the consciousness?
|
|
indigofuzzy
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 145
Registered: 1-10-2006
Location: DarkCity, Bay of Rainbows, Moon
Member Is Offline
Mood: Distilled
|
|
Quote: |
Those had pumps get to oh about 710 if you really work your ass off.
|
710? as in 710 millibars? or 710 mm hg below atmospheric? (that'd be about 50 mm hg, right)
Or am I totally misreading?
|
|
MagicJigPipe
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1554
Registered: 19-9-2007
Location: USA
Member Is Offline
Mood: Suspicious
|
|
Evil, does that pump heat your water significantly? Also, where did you get it and how much was it?
"There must be no barriers to freedom of inquiry ... There is no place for dogma in science. The scientist is free, and must be free to ask any
question, to doubt any assertion, to seek for any evidence, to correct any errors. ... We know that the only way to avoid error is to detect it and
that the only way to detect it is to be free to inquire. And we know that as long as men are free to ask what they must, free to say what they think,
free to think what they will, freedom can never be lost, and science can never regress." -J. Robert Oppenheimer
|
|
evil_lurker
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 767
Registered: 12-3-2005
Location: United States of Elbonia
Member Is Offline
Mood: On the wagon again.
|
|
Harbor freight $30-35 IIRC. Yeah it does heat up the water pretty good. Thats why there are two lines coming out of the green thing. The smaller line
is an inlet where cool water goes in from the well, and the overflow outlet is the braided hose. Works really well... only uses 10-15 gallons per hour
or so and keeps the temps pretty well constant... constant temps, constant vacuum.
Not all chemicals are bad. Without chemicals such as hydrogen and oxygen, for example, there would be no way to make water, a vital ingredient in
beer.
|
|
MagicJigPipe
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1554
Registered: 19-9-2007
Location: USA
Member Is Offline
Mood: Suspicious
|
|
Damn, I also forgot to ask what you used as a baffle, if you needed one.
"There must be no barriers to freedom of inquiry ... There is no place for dogma in science. The scientist is free, and must be free to ask any
question, to doubt any assertion, to seek for any evidence, to correct any errors. ... We know that the only way to avoid error is to detect it and
that the only way to detect it is to be free to inquire. And we know that as long as men are free to ask what they must, free to say what they think,
free to think what they will, freedom can never be lost, and science can never regress." -J. Robert Oppenheimer
|
|
S.C. Wack
bibliomaster
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2419
Registered: 7-5-2004
Location: Cornworld, Central USA
Member Is Offline
Mood: Enhanced
|
|
Quote: | Originally posted by ShulginJr
hmmmmm I've looked at some of those aspirator pumps on ebay......they look like they are for cleaning dentures or something |
Aspirator pump:
www.coleparmer.com/catalog/product_view.asp?sku=3503100
|
|
Klute
International Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 1378
Registered: 18-10-2006
Location: France
Member Is Offline
Mood: No Mood
|
|
Sorry to be pushing the off-topic too, but EL, I really like your setup and intend on "upgrading" mine in a simialr way. Using the pump to feed the
condenser is pretty smart, but doesn't the water heat up to much afetr a while to correctly condense low-boiling compounds? I guess if you want to
remove a solvant under slight vacuum you would just aswell better be off using a independant circuit, as my pump heats the water up to 40-45°C after
30-60min turning..
Also, do find singificant advantage in using a small reservoir? I use 20L as it takes longer to heat up, but I'm not sure if I really gain that much
time. Maybe 5L would heat up in just a little less time, and take less place.. Is that your intial design, or have you tried a larger tube beforehand?
Having a second circuit for the condenser could be advantageous in the sense that a small volume, heated up only be the condenser and a small pump,
in a "cold tube" (the things you put your picnic in for it to stay cool, forgot the word), would necesiate much less ice to saty at 5°C for example,
and would take much longer to heat up than if it was used by the aspirator too.
One thing that could be nice would be to feed the condenser with tap water, and evacuate it to the aspirator's reservoir, with an overflow. This way
the aspirator's water would be gradually cooled to some extent, but this prevents keeping a efective amount of water-treatment: I use oxone or TCCA to
avoid molds/algae, which appear pretty quickly otherwise, aswell as a healthy amount of Na2CO3 to stop the rusting that had accured quite severaly
beforehand. Thanks a million to Bio for this tip, which works great! Clear water ever since..
Ideally, it would be nice to be able to switch from one system to another, using the aspirator's water in the condenser when condensing high boiling
vapors, and avoiding water waste, and switching with adequate taps to a independant cold reservoir when condensing low boiling vapors.
Sorry, I'm starting to think out loud.
BTW, how much pressure do you read on your manometer at maximum opening? I get 2.5bar bax, but my mano is attached after 2 90° angles, and just
before a reduction, leading to some pressure lost..
[Edited on 21-5-2008 by Klute]
\"You can battle with a demon, you can embrace a demon; what the hell can you do with a fucking spiritual computer?\"
-Alice Parr
|
|
evil_lurker
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 767
Registered: 12-3-2005
Location: United States of Elbonia
Member Is Offline
Mood: On the wagon again.
|
|
My pump usually pushes around 40-45PSI or thereabouts. The previous system managed to run around 50PSI, but, I think my lower PSI is due to the longer
PVC fitting that screws in the pump restricting the intake flow.
And yes the system is equipped with a constant tap water flow inlet with overflow drain hence no need for a larger resevoir... it only holds like 3-4
liters... the inlet flow produces quite adequate turnover so the temps don't fluctuate very much at all.
My biggest reason for designing the system the way I did was so it would easily fit behind my lattice on the rear of my work bench out of my way.
Not all chemicals are bad. Without chemicals such as hydrogen and oxygen, for example, there would be no way to make water, a vital ingredient in
beer.
|
|
pantone159
National Hazard
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 589
Registered: 27-6-2006
Location: Austin, TX, USA
Member Is Offline
Mood: desperate for shade
|
|
evil_lurker, I am also impressed. One of the things I really like about this board is reading about (and seeing) all the lab setups that people make.
|
|