Phthalic anhydride
 Fluffy phthalic anhydride
| |
| Names | |
|---|---|
| IUPAC name
2-Benzofuran-1,3-dione
| |
| Other names
1,3-Dioxophthalan
1,3-Isobenzofurandione 1,3-Phthalandione Isobenzofuran-1,3-dione Phthalic anhydride | |
| Properties | |
| C8H4O3 | |
| Molar mass | 148.1 g/mol |
| Appearance | White solid |
| Odor | Acrid |
| Density | 1.53 g/cm3 (20 °C) 1.2 g/cm3 (135 °C) |
| Melting point | 131.6 °C (268.9 °F; 404.8 K) |
| Boiling point | 295 °C (563 °F; 568 K) |
| 0.62 g/100 g (20 °C) 19.0 g/100 g (100 °C) Slow hydrolysis | |
| Solubility | Dissolves and slowly reacts with alcohols, amines Soluble in acetone, benzene Slightly soluble in carbon disulfide, diethyl ether |
| Vapor pressure | 0.0015 mmHg (20 °C) |
| Thermochemistry | |
| Hazards | |
| Safety data sheet | Sigma-Aldrich |
| Flash point | 152 °C (305.6 °F; 425 K) |
| Lethal dose or concentration (LD, LC): | |
| LD50 (Median dose)
|
4020 mg/kg (oral, rat) 1520 mg/kg (oral, mouse) 800 mg/kg (oral, cat) 800-1600 mg/kg (oral, rat) 2210 mg/kg (oral, mouse) |
| Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). | |
| Infobox references | |
Phthalic anhydride is an organic compound, the anhydride of phthalic acid. It is an important industrial chemical used in the production of plasticizers, dyestuffs, and pharmaceuticals.
Contents
Properties
Chemical
Phthalic anhydride hydrolyzes in water to phthalic acid.
Physical
Phthalic anhydride is a white solid, which slowly reacts with water.
Availability
Phthalic anhydride is sold by various chemical suppliers and it's quite cheap. It can also be purchased online.
Preparation
Phthalic anhydride can be prepared from diethylhexyl phthalate, which can be easily found in vinyl gloves, available in most pharmacies and medical supply stores. Look on the box label for gloves that are made with PVC. Grind about 50 g of gloves to flakes in a beaker. Add isopropanol and reflux the mixture for an hour to extract the diethylhexyl phthalate. Filter the resulting alcoholic solution and then boil off half of its volume. A solution of 10 g of sodium hydroxide is then added to the alcoholic solution of diethylhexyl phthalate and reflux the mixture for another hour, to hydrolyze it to disodium phthalate. Turn off the heating and let it cool. The reaction mixture will separate into two layers, the upper layer is the alcoholic layer, while the bottom is the aqueous layer, containing the disodium phthlate. Remove the alcohol layer and collect the disodium phthlate aqueous solution. To the aqueous solution, add 25 ml of fuming hydrochloric acid (12 M) to convert it to phthalic acid. Cool the solution to precipitate the phthalic acid and decant off the water. Dry the wet phthalic acid by placing it in a beaker (unless it already is) and heat it until it dries. Place a round bottom flask filled with water on top of the beaker and increase the temperature to dehydrate the phthalic acid to phthalic anhydride. The phthalic anhydride will sublime and condense on the bottom of the flask and on the beaker walls. The crystals appear as cotton candy. When a sufficient amount of the anhydride has deposited, take the beaker off the hotplate, let it cool and collect the crystals. Do not wait too much, as the anhydride crystals will get too heavy and will fall back in the phthallic acid melt. Repeat until no more phthallic anhydride condenses.[1]
Another route involves the oxidation of naphthalene with nitric acid or vanadium pentoxide. Mercury(II) sulfate and sulfuric acid can also be used.
The modern industrial route is the vapour-phase oxidation of ortho-xylene by air over a catalyst.
Projects
- Make luminol
- Make dyes, for example:
- Make dimethyl phthalate
- Make phthalimide
- Make cellulose acetate phthalate
Handling
Safety
Phthalic anhydride is a skin irritant. Phthalates are endocrine disruptors. Avoid breathing dust and vapours of phthalic anhydride.
Storage
Phthalic anhydride should be stored in dry conditions, such as air-tight containers.
Disposal
Can be neutralized with an aqueous alkaline solution to disodium phthalate.
Complete destruction can be achieved with a strong oxidizing solution, such as chromic acid, Fenton's reagent, piranha solution.
Gallery
Phthalic acid
Phthalic anhydride (sublimated)
References
Relevant Sciencemadness threads
- Phthalic Anhydride
- phthalic acid -> phthalic anhydride
- Get phthalic anhydride from phthalic acid
- Need help with prep. of phthalic anhydride from naphthalene
- Conversion of Phthalic Acid to Phthalic Anhydride
- Solubility of phthalic anhydride and resorcinol in sulfuric acid?
- Phthalic anhydride, anyone?
