Difference between revisions of "Phosphoryl chloride"
(One intermediate revision by one other user not shown) | |||
Line 112: | Line 112: | ||
==Properties== | ==Properties== | ||
===Chemical=== | ===Chemical=== | ||
− | Phosphorus oxychloride reacts with water to form phosphoric acid and hydrogen chloride fumes. | + | Phosphorus oxychloride reacts with water to form [[phosphoric acid]] and [[hydrogen chloride]] fumes. |
− | :POCl<sub>3</sub> + 3 H<sub>2</sub>O → H<sub>3</sub>PO<sub>4</sub> + 3 HCl | + | : POCl<sub>3</sub> + 3 H<sub>2</sub>O → H<sub>3</sub>PO<sub>4</sub> + 3 HCl |
+ | |||
+ | Reaction with alcohols and phenols gives phosphate esters: | ||
+ | |||
+ | : POCl<sub>3</sub> + 3 ROH → O=P(OR)<sub>3</sub> + 3 HCl | ||
+ | |||
+ | Phosphoryl chloride can also act as a Lewis base, forming adducts with a variety of Lewis acids such as [[titanium(IV) chloride]]: | ||
+ | |||
+ | : POCl<sub>3</sub> + TiCl<sub>4</sub> → POCl<sub>3</sub>·TiCl<sub>4</sub> | ||
+ | |||
+ | The aluminium chloride adduct (POCl<sub>3</sub>·AlCl<sub>3</sub>) is quite stable, and so POCl<sub>3</sub> can be used to remove AlCl<sub>3</sub> from reaction mixtures, for example at the end of a Friedel-Crafts reaction. | ||
+ | |||
+ | Phosphoryl chloride reacts with [[hydrogen bromide]] in the presence of Lewis-acidic catalysts to produce phosphoryl bromide. | ||
+ | |||
+ | : POCl<sub>3</sub> + 3 HBr → POBr<sub>3</sub> + 3 HCl | ||
===Physical=== | ===Physical=== | ||
Line 120: | Line 134: | ||
==Availability== | ==Availability== | ||
− | Is sold by big chemical suppliers, but it's next to impossible to get hold of. | + | Is sold by big chemical suppliers, but for a private individual it's next to impossible to get hold of. |
− | Phosphoryl chloride is listed on Schedule 3 of the Chemical Weapons Convention. Transactions tend to be monitored, especially if large amounts are done. | + | Phosphoryl chloride is listed on Schedule 3 of the Chemical Weapons Convention. Transactions tend to be monitored by authorities, especially if large amounts are done. |
==Preparation== | ==Preparation== | ||
− | Phosphoryl chloride can be prepared by oxidizing [[phosphorus trichloride]] with pure [[oxygen]], between 20-50 °C. Air is ineffective for this reaction. | + | Phosphoryl chloride can be easily prepared by oxidizing [[phosphorus trichloride]] with pure [[oxygen]], between 20-50 °C. Air is ineffective for this reaction, and thus pure oxygen must be used.<ref>Berthelot, M.; Ann. Chim. Phys.; vol. 15; (1878); p. 209</ref><ref>Patent; Mugdan, M.; Sixt, J.; Consortium fuer Elektrochemische Industrie G.m.b.H.; DE624884; (1936); C. I; (1936); p. 3559</ref><ref>Bettermann, Gerhard; Krause, Werner; Riess, Gerhard; Hofmann, Thomas (2000). "Phosphorus Compounds, Inorganic". Ullmann's Encyclopedia of Industrial Chemistry</ref> |
− | : | + | : PCl<sub>3</sub> + ½ O<sub>2</sub> → POCl<sub>3</sub> |
− | [[ | + | [[Ozone]] has also been used successfully.<ref>Remsen, I.; Am. J. Sci.; vol. 11; (1876); p. 365 - 369</ref> |
− | + | [[Potassium chlorate]] can also be used as oxidizer, instead of pure oxygen.<ref>Schiff, H.; Liebigs Annalen der Chemie; vol. 106; (1858); p. 116 - 118</ref><ref>Dervin, E.; Comptes Rendus Hebdomadaires des Seances de l'Academie des Sciences; vol. 97; (1883); p. 576 - 578</ref><ref>Ullmann, F.; Fornaro, A.; Ber.; vol. 34; (1901); p. 2172 - 2173</ref> | |
− | : | + | : 3 PCl<sub>3</sub> + KClO<sub>3</sub> → 3 POCl<sub>3</sub> + KCl |
− | + | Partial hydrolysis of [[phosphorus pentachloride]] with water, at very low temperatures, under vacuum is indicated to yield phosphoryl chloride. Yield is given as 88%.<ref>Oddo, G.; Gazzetta Chimica Italiana; vol. 29; nb. II; (1900); p. 330 - 343</ref><ref>Sammons; Frey; Bruzik; Tsai; Journal of the American Chemical Society; vol. 105; nb. 16; (1983); p. 5455 - 5461</ref> | |
− | Reduction of tricalcium phosphate with [[carbon]] in the presence of [[chlorine]] gas is more accessible route, although it requires high temperatures. | + | : PCl<sub>5</sub> + H<sub>2</sub>O → POCl<sub>3</sub> + 2 HCl |
+ | |||
+ | Heating a mixture of anhydrous phosphoric acid and phosphorus pentachloride at 130 °C will give off fumes of POCl<sub>3</sub>:<ref>Fejes, P.; Magyar Tudomanyos Akademia Kozponti Fizikai Kutato Intezetenek Kozlemenyei; (1959); p. 18716; Magyar Tudomanyos Akademia Kozponti Fizikai Kutato Intezetenek Kozlemenyei; vol. 3; (1955); p. 535 - 542</ref><ref>Casida, J. E.; Acta Chemica Scandinavica (1947-1973); vol. 12; (1958); p. 1691 - 1692</ref><ref>Kalinsky, J. L.; Weinstein, A.; Journal of the American Chemical Society; vol. 76; (1954); p. 5882 - 5882</ref><ref>Murray, D. H.; Spinks, J. W. T.; Canadian Journal of Chemistry; vol. 30; (1952); p. 497 - 497</ref> | ||
+ | |||
+ | : H<sub>3</sub>PO<sub>4</sub> + PCl<sub>5</sub> → POCl<sub>3</sub> + ??? | ||
+ | |||
+ | Reaction of phosphorus pentachloride with phosphorus pentoxide will also give POCl<sub>3</sub>:<ref>Pradyot, Patnaik (2003). Handbook of Inorganic Chemicals. New York: McGraw-Hill. p. 709</ref> | ||
+ | |||
+ | : 6 PCl<sub>5</sub> + P<sub>4</sub>O<sub>10</sub> → 10 POCl<sub>3</sub> | ||
+ | |||
+ | If phosphorus pentoxide is not available, [[boric acid]] or [[oxalic acid]] can also be used. | ||
+ | |||
+ | :3 PCl<sub>5</sub> + 2 H<sub>3</sub>BO<sub>3</sub> → 3 POCl<sub>3</sub> + B<sub>2</sub>O<sub>3</sub> + 6 HCl | ||
+ | : PCl<sub>5</sub> + (COOH)<sub>2</sub> → POCl<sub>3</sub> + CO + CO<sub>2</sub> + 2 HCl | ||
+ | |||
+ | Heating a chloride salt, like [[sodium chloride]] with phosphorus pentoxide at 250 °C will also give phosphorus oxychloride, although the yield is not great:<ref>Tarbutton, G.; Egan, E. P.; Frary, S. G.; Journal of the American Chemical Society; vol. 63; (1941); p. 1782 - 1789</ref><ref>[https://www.youtube.com/watch?v=eFqnGDRMBxE ''Turning Salt Into Phosphoryl Chloride: The Chemical That Hospitalized Me'']</ref> | ||
+ | |||
+ | :2 P<sub>2</sub>O<sub>5</sub> + 3 NaCl → 3 NaPO<sub>3</sub> + POCl<sub>3</sub> | ||
+ | |||
+ | Anhydrous [[calcium chloride]] can also be used for the reaction above. | ||
+ | |||
+ | :4 P<sub>2</sub>O<sub>5</sub> + 3 CaCl<sub>2</sub> → 3 Ca(PO<sub>3</sub>)<sub>2</sub> + 2 POCl<sub>3</sub> | ||
+ | |||
+ | Both regents must be perfectly dry and the pentoxide must be fresh, old one tens to be degraded from moisture. | ||
+ | |||
+ | Reduction of tricalcium phosphate with [[carbon]] in the presence of [[chlorine]] gas is more accessible route, although it requires high temperatures, of around 700 °C. Yield is given as 95%.<ref>Kato, Y.; Fujino, S.; Kogyo Kagaku Zasshi; vol. 36; (1933); p. B132</ref><ref>Lerner, Leonid (2011). Small-Scale Synthesis of Laboratory Reagents with Reaction Modeling. Boca Raton, Florida: CRC Press. pp. 169–177</ref> | ||
:Ca<sub>3</sub>(PO<sub>4</sub>)<sub>2</sub> + 6 C + 6 Cl<sub>2</sub> → 2 POCl<sub>3</sub> + 3 CaCl<sub>2</sub> + 6 CO | :Ca<sub>3</sub>(PO<sub>4</sub>)<sub>2</sub> + 6 C + 6 Cl<sub>2</sub> → 2 POCl<sub>3</sub> + 3 CaCl<sub>2</sub> + 6 CO | ||
+ | |||
+ | It should be noted that chlorine and carbon monoxide can form very toxic [[phosgene]], so this route, while accessible, may not be safe. | ||
+ | |||
+ | There are several other routes to this compound described in literature, with varying results. | ||
+ | |||
+ | Reaction of phosphorous pentoxide with [[nitrosyl chloride]], in a porcelain tube at 1000-1100 °C, will yield phosphoryl chloride and nitrogen trichloride. The yield of this route is described as "poor".<ref>Sidgwick, N. V.; The chemical Elements and their Compounds, Bd. 1, Oxford 1950, S. 705</ref><ref>Noyes, W. A.; Journal of the American Chemical Society; vol. 35; (1913); p. 767 - 767</ref> | ||
+ | |||
+ | : PCl<sub>5</sub> + NOCl → POCl<sub>3</sub> + NCl<sub>3</sub> | ||
+ | |||
+ | Phosphoramidic acid (H<sub>2</sub>PO<sub>3</sub>NH<sub>2</sub>) will also react with phosphorus pentachloride to give POCl<sub>3</sub>. This is done by refluxing the two reagents in tetrachlorethane, for 4 hours. The raw product is purified under vacuum. Yield is given as 88%.<ref>Becke-Goehring, M.; Mann, T.; Euler, H. D.; Chemische Berichte; vol. 94; (1961); p. 193 - 198</ref> | ||
+ | |||
+ | : PCl<sub>5</sub> + (OH)<sub>2</sub>P(=O)NH<sub>2</sub> → POCl<sub>3</sub> + PCl<sub>3</sub>=NP(=O)Cl<sub>2</sub> + HCl | ||
+ | |||
+ | [[Sulfur trioxide]] has also been used.<ref>Paul, R. C.; Arora, C. L.; Malhotra, K. C.; Indian J. Chem.; vol. 9; (1971); p. 473 - 476</ref> | ||
+ | |||
+ | : PCl<sub>5</sub> + 2 SO<sub>3</sub> → POCl<sub>3</sub> + S<sub>2</sub>Cl<sub>2</sub>O<sub>5</sub> | ||
==Projects== | ==Projects== | ||
*Make phosphate esters | *Make phosphate esters | ||
*Make nitriles from amides | *Make nitriles from amides | ||
+ | *Remove AlCl<sub>3</sub> from reaction products | ||
*Vilsmeier–Haack reaction | *Vilsmeier–Haack reaction | ||
==Handling== | ==Handling== | ||
===Safety=== | ===Safety=== | ||
− | Phosphorus oxychloride is very corrosive and toxic. Wear proper protection when handling the compound. Only work in a fumehood or in a well ventilated place. | + | Phosphorus oxychloride is very corrosive and toxic, and its fumes are highly corrosive and toxic. Wear proper protection when handling the compound. Only work in a fumehood or in a well ventilated place. |
+ | |||
+ | Symptoms of exposure to this compound may take several hours before they appear. | ||
===Storage=== | ===Storage=== |
Latest revision as of 17:44, 16 June 2024
Names | |
---|---|
IUPAC name
Phosphoryl trichloride
| |
Other names
Phosphorus oxychloride
Phosphoric trichloride Phosphorus trichloride oxide Phosphorous(V) oxychloride Trichlorophosphate | |
Properties | |
POCl3 | |
Molar mass | 153.33 g/mol |
Appearance | Colorless fuming liquid |
Odor | Pungent, acidic |
Density | 1.645 g/cm3 |
Melting point | 1.25 °C (34.25 °F; 274.40 K) |
Boiling point | 105.8 °C (222.4 °F; 378.9 K) |
Reacts | |
Solubility | Reacts with alcohols, carboxylic acids Soluble in benzoyl chloride, bromine, bromoacetic acid, carbon disulfide, liq. Cl2, liq. HBr, liq. HCl, hydrogen cyanide, liq. H2S, anh. nitric acid, sulfuryl chloride, liq. SO2, SnCl4 Sparingly soluble in liq. HI |
Vapor pressure | 40 mmHg (27.3 °C) |
Thermochemistry | |
Std enthalpy of
formation (ΔfH |
-615.7 kJ/mol |
Hazards | |
Safety data sheet | Sigma-Aldrich |
Flash point | Non-flammable |
Related compounds | |
Related compounds
|
Phosphoryl bromide |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). | |
Infobox references | |
Phosphoryl chloride or phosphorus oxychloride is a fuming colourless liquid, widely used for the synthesis of phosphate esters. It is a colorless fuming liquid, with the formula POCl3.
Contents
Properties
Chemical
Phosphorus oxychloride reacts with water to form phosphoric acid and hydrogen chloride fumes.
- POCl3 + 3 H2O → H3PO4 + 3 HCl
Reaction with alcohols and phenols gives phosphate esters:
- POCl3 + 3 ROH → O=P(OR)3 + 3 HCl
Phosphoryl chloride can also act as a Lewis base, forming adducts with a variety of Lewis acids such as titanium(IV) chloride:
- POCl3 + TiCl4 → POCl3·TiCl4
The aluminium chloride adduct (POCl3·AlCl3) is quite stable, and so POCl3 can be used to remove AlCl3 from reaction mixtures, for example at the end of a Friedel-Crafts reaction.
Phosphoryl chloride reacts with hydrogen bromide in the presence of Lewis-acidic catalysts to produce phosphoryl bromide.
- POCl3 + 3 HBr → POBr3 + 3 HCl
Physical
Phosphoryl chloride is a colorless liquid which fumes in air.
Availability
Is sold by big chemical suppliers, but for a private individual it's next to impossible to get hold of.
Phosphoryl chloride is listed on Schedule 3 of the Chemical Weapons Convention. Transactions tend to be monitored by authorities, especially if large amounts are done.
Preparation
Phosphoryl chloride can be easily prepared by oxidizing phosphorus trichloride with pure oxygen, between 20-50 °C. Air is ineffective for this reaction, and thus pure oxygen must be used.[1][2][3]
- PCl3 + ½ O2 → POCl3
Ozone has also been used successfully.[4]
Potassium chlorate can also be used as oxidizer, instead of pure oxygen.[5][6][7]
- 3 PCl3 + KClO3 → 3 POCl3 + KCl
Partial hydrolysis of phosphorus pentachloride with water, at very low temperatures, under vacuum is indicated to yield phosphoryl chloride. Yield is given as 88%.[8][9]
- PCl5 + H2O → POCl3 + 2 HCl
Heating a mixture of anhydrous phosphoric acid and phosphorus pentachloride at 130 °C will give off fumes of POCl3:[10][11][12][13]
- H3PO4 + PCl5 → POCl3 + ???
Reaction of phosphorus pentachloride with phosphorus pentoxide will also give POCl3:[14]
- 6 PCl5 + P4O10 → 10 POCl3
If phosphorus pentoxide is not available, boric acid or oxalic acid can also be used.
- 3 PCl5 + 2 H3BO3 → 3 POCl3 + B2O3 + 6 HCl
- PCl5 + (COOH)2 → POCl3 + CO + CO2 + 2 HCl
Heating a chloride salt, like sodium chloride with phosphorus pentoxide at 250 °C will also give phosphorus oxychloride, although the yield is not great:[15][16]
- 2 P2O5 + 3 NaCl → 3 NaPO3 + POCl3
Anhydrous calcium chloride can also be used for the reaction above.
- 4 P2O5 + 3 CaCl2 → 3 Ca(PO3)2 + 2 POCl3
Both regents must be perfectly dry and the pentoxide must be fresh, old one tens to be degraded from moisture.
Reduction of tricalcium phosphate with carbon in the presence of chlorine gas is more accessible route, although it requires high temperatures, of around 700 °C. Yield is given as 95%.[17][18]
- Ca3(PO4)2 + 6 C + 6 Cl2 → 2 POCl3 + 3 CaCl2 + 6 CO
It should be noted that chlorine and carbon monoxide can form very toxic phosgene, so this route, while accessible, may not be safe.
There are several other routes to this compound described in literature, with varying results.
Reaction of phosphorous pentoxide with nitrosyl chloride, in a porcelain tube at 1000-1100 °C, will yield phosphoryl chloride and nitrogen trichloride. The yield of this route is described as "poor".[19][20]
- PCl5 + NOCl → POCl3 + NCl3
Phosphoramidic acid (H2PO3NH2) will also react with phosphorus pentachloride to give POCl3. This is done by refluxing the two reagents in tetrachlorethane, for 4 hours. The raw product is purified under vacuum. Yield is given as 88%.[21]
- PCl5 + (OH)2P(=O)NH2 → POCl3 + PCl3=NP(=O)Cl2 + HCl
Sulfur trioxide has also been used.[22]
- PCl5 + 2 SO3 → POCl3 + S2Cl2O5
Projects
- Make phosphate esters
- Make nitriles from amides
- Remove AlCl3 from reaction products
- Vilsmeier–Haack reaction
Handling
Safety
Phosphorus oxychloride is very corrosive and toxic, and its fumes are highly corrosive and toxic. Wear proper protection when handling the compound. Only work in a fumehood or in a well ventilated place.
Symptoms of exposure to this compound may take several hours before they appear.
Storage
Phosphoryl chloride should be stored in Schlenk flasks, as they're the best storage containers for air and water sensitive reagents.
Disposal
Phosphoryl chloride should be neutralized with a base, such as calcium hydroxide suspension outside or in a well ventilated area. Always add small amounts of POCl3 to prevent splashing. Try not to use carbonates, as they will fizzle and cause some POCl3 to become airborne. Since small amounts of HCl fumes will be formed anyway, use a lidded container in case of runaway.
References
- ↑ Berthelot, M.; Ann. Chim. Phys.; vol. 15; (1878); p. 209
- ↑ Patent; Mugdan, M.; Sixt, J.; Consortium fuer Elektrochemische Industrie G.m.b.H.; DE624884; (1936); C. I; (1936); p. 3559
- ↑ Bettermann, Gerhard; Krause, Werner; Riess, Gerhard; Hofmann, Thomas (2000). "Phosphorus Compounds, Inorganic". Ullmann's Encyclopedia of Industrial Chemistry
- ↑ Remsen, I.; Am. J. Sci.; vol. 11; (1876); p. 365 - 369
- ↑ Schiff, H.; Liebigs Annalen der Chemie; vol. 106; (1858); p. 116 - 118
- ↑ Dervin, E.; Comptes Rendus Hebdomadaires des Seances de l'Academie des Sciences; vol. 97; (1883); p. 576 - 578
- ↑ Ullmann, F.; Fornaro, A.; Ber.; vol. 34; (1901); p. 2172 - 2173
- ↑ Oddo, G.; Gazzetta Chimica Italiana; vol. 29; nb. II; (1900); p. 330 - 343
- ↑ Sammons; Frey; Bruzik; Tsai; Journal of the American Chemical Society; vol. 105; nb. 16; (1983); p. 5455 - 5461
- ↑ Fejes, P.; Magyar Tudomanyos Akademia Kozponti Fizikai Kutato Intezetenek Kozlemenyei; (1959); p. 18716; Magyar Tudomanyos Akademia Kozponti Fizikai Kutato Intezetenek Kozlemenyei; vol. 3; (1955); p. 535 - 542
- ↑ Casida, J. E.; Acta Chemica Scandinavica (1947-1973); vol. 12; (1958); p. 1691 - 1692
- ↑ Kalinsky, J. L.; Weinstein, A.; Journal of the American Chemical Society; vol. 76; (1954); p. 5882 - 5882
- ↑ Murray, D. H.; Spinks, J. W. T.; Canadian Journal of Chemistry; vol. 30; (1952); p. 497 - 497
- ↑ Pradyot, Patnaik (2003). Handbook of Inorganic Chemicals. New York: McGraw-Hill. p. 709
- ↑ Tarbutton, G.; Egan, E. P.; Frary, S. G.; Journal of the American Chemical Society; vol. 63; (1941); p. 1782 - 1789
- ↑ Turning Salt Into Phosphoryl Chloride: The Chemical That Hospitalized Me
- ↑ Kato, Y.; Fujino, S.; Kogyo Kagaku Zasshi; vol. 36; (1933); p. B132
- ↑ Lerner, Leonid (2011). Small-Scale Synthesis of Laboratory Reagents with Reaction Modeling. Boca Raton, Florida: CRC Press. pp. 169–177
- ↑ Sidgwick, N. V.; The chemical Elements and their Compounds, Bd. 1, Oxford 1950, S. 705
- ↑ Noyes, W. A.; Journal of the American Chemical Society; vol. 35; (1913); p. 767 - 767
- ↑ Becke-Goehring, M.; Mann, T.; Euler, H. D.; Chemische Berichte; vol. 94; (1961); p. 193 - 198
- ↑ Paul, R. C.; Arora, C. L.; Malhotra, K. C.; Indian J. Chem.; vol. 9; (1971); p. 473 - 476
Relevant Sciencemadness threads
- Articles containing unverified chemical infoboxes
- Chembox articles without image
- Chemical compounds
- Inorganic compounds
- Phosphorus compounds
- Chlorine compounds
- Phosphorus halides
- Oxohalides
- Materials that react with water
- Materials unstable in basic solution
- Things that can kill you very quickly
- Things that should NOT be messed with except by professionals
- Choking agents
- Schedule 3 chemicals
- Liquids