Horus
Harmless
Posts: 5
Registered: 9-12-2007
Member Is Offline
Mood: No Mood
|
|
Designs for a Homemade Bioreactor Complete w/ Pictures!
I found this online, hope y'all like it 
https://tspace.library.utoronto.ca/bitstream/1807/1419/1/jb0...
I'm glad I found it because it's exactly what I need for biosynthesis. I was mistaken about the rotary shaker: that's only
for lab-scale research, not large culture broths (like this is).
"Full government control of all activities of the individual is virtually the goal of both national parties." - Ludwig von Mises
|
|
|
Xenoid
National Hazard
Posts: 775
Registered: 14-6-2007
Location: Springs Junction, New Zealand
Member Is Offline
Mood: Comfortably Numb
|
|
Hmmm... It's hardly rocket science!
Couldn't you have though up something like that for yourself.
Try some of the (very large) wide mouthed pickle jars from a delicatessen!
Make a plastic lid and fit an aquarium bubble stone, heater element, pH meter and stirrer, etc. - not too difficult.
Maybe even use a large glass fish tank (aquarium) - does it need to be round?
|
|
|
Magpie
lab constructor
Posts: 5939
Registered: 1-11-2003
Location: USA
Member Is Offline
Mood: Chemistry: the subtle science.
|
|
The welding job on that agitator looks pretty bad. I thought that this was anathema for biological work. I have a relative who works for a company
that fabricates vessels for the pharmaceutical industry. They require that the wetted surfaces are mirror smooth.
This doesn't mean, however, that one can't get some useful ideas from that article.
The single most important condition for a successful synthesis is good mixing - Nicodem
|
|
|
not_important
International Hazard
Posts: 3873
Registered: 21-7-2006
Member Is Offline
Mood: No Mood
|
|
Round is easier to make sure you've got good mixing without putting too much energy into stirring; plus it's easier to clean - corners trap stuff.
A potential problem with plastic is leaching of unreacted monomer, catalyst, stabilisers, plasticisers, and so on. If you know what affects what you
are growing, and know what's in or not in the plastic, then you're OK.
|
|
|
Horus
Harmless
Posts: 5
Registered: 9-12-2007
Member Is Offline
Mood: No Mood
|
|
| Quote: | Originally posted by Xenoid
Hmmm... It's hardly rocket science!
Couldn't you have though up something like that for yourself.
Try some of the (very large) wide mouthed pickle jars from a delicatessen!
Make a plastic lid and fit an aquarium bubble stone, heater element, pH meter and stirrer, etc. - not too difficult.
Maybe even use a large glass fish tank (aquarium) - does it need to be round? |
Yeah I know it's not anything really complicated; it just helped a lot to see a design with pictures. Easier to visualize. I don't even need most of
that stuff, all I really need is the airpump and stirrer, the antifoam too.
"Full government control of all activities of the individual is virtually the goal of both national parties." - Ludwig von Mises
|
|
|
Xenoid
National Hazard
Posts: 775
Registered: 14-6-2007
Location: Springs Junction, New Zealand
Member Is Offline
Mood: Comfortably Numb
|
|
| Quote: | Originally posted by Horus
Yeah I know it's not anything really complicated; it just helped a lot to see a design with pictures. Easier to visualize. I don't even need most of
that stuff, all I really need is the airpump and stirrer, the antifoam too. |
Try one of those large round fishbowls, put it on a magnetic stirrer hotplate! You can then precisely control the temperature and stirring at least.
There are plenty of plans on the web for homemade magnetic stirrers using computer fans, as well. A fishbowl will let in lots of light as well if you
need that for your process!
|
|
|
Horus
Harmless
Posts: 5
Registered: 9-12-2007
Member Is Offline
Mood: No Mood
|
|
So far things are going good with the building . . . just making my shopping list haha. Some of those things are hard to find. It took me for-ever
to find an air sparger (though it's not like it'd be really hard to make one). For the actual air-pump, I plan to use this:
http://morebeer.com/view_product/16607/
or something similar, as it filters the air well of spores and such (it would have to for what that product is intended for).
"Full government control of all activities of the individual is virtually the goal of both national parties." - Ludwig von Mises
|
|
|
Magpie
lab constructor
Posts: 5939
Registered: 1-11-2003
Location: USA
Member Is Offline
Mood: Chemistry: the subtle science.
|
|
That looks just like my aquarium air pump! Check them out before you buy.
The single most important condition for a successful synthesis is good mixing - Nicodem
|
|
|
arkos
Harmless
Posts: 4
Registered: 18-1-2010
Member Is Offline
Mood: No Mood
|
|
Here's another example: http://www.biotechniques.com/BiotechniquesJournal/2008/Augus...
What useful things would be possible to produce with such a system?
|
|
|
jwpa17
Harmless
Posts: 45
Registered: 28-5-2013
Member Is Offline
Mood: No Mood
|
|
bits and pieces
This is something I'm quite interested in, because commercial laboratory bioreactors cost upwards of $10K.
Each of these has some useful information, but not necessarily a complete design.
And you might find some of the links here interesting:
DIY Lab Equipment
You need to decide whether you want to be able to sterilize your system, or if it is sufficient to sanitize it and inoculate with a large amount of
your desired culture. Sterilization is better, but kind of hard for a home user. I have access to a large autoclave. You may have to wash the
interior with, e.g., 70% ethanol. You want to be careful of materials selection, regardless.
Please, keep us updated.
Attachment: MonitoringAndControl.pdf (4.1MB)
This file has been downloaded 829 times
Attachment: MiniaturizedPhotobioreactor.pdf (2MB)
This file has been downloaded 845 times
Attachment: ForPlantScience.pdf (440kB)
This file has been downloaded 741 times
[Edited on 8-7-2014 by jwpa17]
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
