RogueRose
International Hazard
Posts: 1593
Registered: 16-6-2014
Member Is Offline
|
|
How does Mg burn in/with PTFE?
I was watching a video of some magnesium flares and one video showed someone supposedly burning Mg and PTFE.
I did some research on it and came across this PDF
http://www.vti.mod.gov.rs/ntp/rad2009/1-09/bosk/bosk.pdf
It looks like it is research from a Russian government site so IDK why it is published in english. I haven't read the whole thing but just looking at
the equations makes me wonder a little.
It theroises that Mg or Al + PTFE will burn very hot and produce a lot of gas - it was researched as a solid rocket propellant. It haven't seen any
mention of an oxidizer used in this reaction and I would think that relying the metal to burn in air with the PTFE (which is very resistant to burn,
but IDK if so at those temps)
http://www.appstate.edu/~clementsjs/journalarticles/zeus_fla...
The PTFE would melt and restrict the amount of atmospheric O2 that can get to the metal to burn.
Am I missing something here about Fluorine? I know Chlorine is used in some pyrotechnics (PVC) and am not sure how it is used either. Can these two
elements "burn" w/o O2 or is there some other reaction that is going on?
Attachment: bosk.pdf (272kB)
This file has been downloaded 486 times
|
|
|
j_sum1
Administrator
Posts: 6320
Registered: 4-10-2014
Location: At home
Member Is Offline
Mood: Most of the ducks are in a row
|
|
| Quote: | | It theroises that Mg or Al + PTFE will burn very hot and produce a lot of gas |
No time for a full answer but…
https://youtu.be/SYucLGUr2MQ?t=1m47s
It is more than just theory.
|
|
|
RogueRose
International Hazard
Posts: 1593
Registered: 16-6-2014
Member Is Offline
|
|
Wow, that was impressive! I wonder if it could be used as a flare material or if it would burn too fast?
Also, have you ever thought about doing video narration professionally? I listened to some of your other videos and it was nice to hear a chem video
that wasn't a computer, electronically altered, a kid or someone stumbling/mumbling their words. Your Aussie accent isn't real thick or harsh like
some of them and most foreigners would probably find the same. Good job on the vid's!
|
|
|
j_sum1
Administrator
Posts: 6320
Registered: 4-10-2014
Location: At home
Member Is Offline
Mood: Most of the ducks are in a row
|
|
Well for start, I am not an aussie. I still have a bit of my own accent left.
And I find narration difficult. Put me in front of a classroom or a crowd and I am fine. Point a camera or a mike at me and I get flustered and trip
over my words. It's not logical but it is real.
I do intend to get better. (And I do intend to finish off the electron series within the next three weeks - before the end of the next holiday break.)
It is always encouraging to get positive feedback. Thank you.
|
|
|
RogueRose
International Hazard
Posts: 1593
Registered: 16-6-2014
Member Is Offline
|
|
Quote: Originally posted by j_sum1  | Well for start, I am not an aussie. I still have a bit of my own accent left.
And I find narration difficult. Put me in front of a classroom or a crowd and I am fine. Point a camera or a mike at me and I get flustered and trip
over my words. It's not logical but it is real.
I do intend to get better. (And I do intend to finish off the electron series within the next three weeks - before the end of the next holiday break.)
It is always encouraging to get positive feedback. Thank you. |
I wouldn't have thought you had any "issues" with speaking into a mic. I wonder if that is more psychological (well kind of obvious) but what I mean
is some people get a "stage fright" in front of those things, I completely understand and feel similar - but I couldn't tell is what I am trying to
say. I found the benzaldehyde narration very "soothing" for a chem video and better than many BBC or PBS documentaries I hear.
IDK if you partake in alcohol, but maybe have a couple of your choice before starting, I find that helps even though people say that it is not
"correct" and a crutch. People take pills right and left for that stuff, it allows you to quiet any inner voice that is making you have second
thoughts. Just a thought.
|
|
|
macckone
Dispenser of practical lab wisdom
Posts: 2168
Registered: 1-3-2013
Location: Over a mile high
Member Is Offline
Mood: Electrical
|
|
Aluminum or Magnesium will strip fluorine from the PTFE.
This is a very exothermic reaction.
It is similar to the thermite reaction.
https://patents.google.com/patent/US5372069
Pyronol is Aluminum, Nickel, Iron Oxide and PTFE.
In the patent they don't mention what the "solid material which will decompose to form a gas when exposed to the heat of the reacting fuels" is but it
is PTFE which also reacts with aluminum or magnesium and the carbon strips oxygen from the iron oxide giving an iron nickle mixture with carbon
dioxide and an aluminum fluoride flux.
A perfect example of how a patent leaves out a CRITICAL piece of information.
|
|
|
j_sum1
Administrator
Posts: 6320
Registered: 4-10-2014
Location: At home
Member Is Offline
Mood: Most of the ducks are in a row
|
|
That's actually a really clever idea to add a bit of flux and heat to a thermite mixture via ptfe.
|
|
|
macckone
Dispenser of practical lab wisdom
Posts: 2168
Registered: 1-3-2013
Location: Over a mile high
Member Is Offline
Mood: Electrical
|
|
Clever ideas are what make them patentable.
|
|
|
Texium
Administrator
Posts: 4580
Registered: 11-1-2014
Location: Salt Lake City
Member Is Offline
Mood: PhD candidate!
|
|
When Brain&Force (our resident LANTHANIDEZ guy) came to visit, we lit off a couple small PTFE mixtures with ytterbium and samarium filings, which
were brilliant green and red respectively!
|
|
|
j_sum1
Administrator
Posts: 6320
Registered: 4-10-2014
Location: At home
Member Is Offline
Mood: Most of the ducks are in a row
|
|
| Quote: Originally posted by Texium (zts16) | | When Brain&Force (our resident LANTHANIDEZ guy) came to visit, we lit off a couple small PTFE mixtures with ytterbium and samarium filings, which
were brilliant green and red respectively! |
OOh! I might have to do that. I will have some nice Yb coming at some stage.
Actually, it could make a nice rare earth series for a video...
|
|
|
Herr Haber
International Hazard
Posts: 1236
Registered: 29-1-2016
Member Is Offline
Mood: No Mood
|
|
https://en.wikipedia.org/wiki/Magnesium/Teflon/Viton
Interesting that you didnt find your way to some pyro book or page.
I might be wrong, but I think Conklin's book contain a few words about these flares. I cant really remember the details but they're very
intereting in the way they work.
|
|
|
NeonPulse
Hazard to Others
Posts: 417
Registered: 29-6-2013
Location: The other end of the internet.
Member Is Offline
Mood: Isolated from Reality! For Real this time....
|
|
I actually explored these kind of mixtures with pleasing results. The Ti/PTFE was especially hot and Al/Mg powders were much like flash powder but
harder to ignite but once they got going they weee hot and bright: see here: https://m.youtube.com/watch?v=qZkmAjLp2-k&autoplay=1
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
