solo
International Hazard
Posts: 3975
Registered: 9-12-2002
Location: Estados Unidos de La Republica Mexicana
Member Is Offline
Mood: ....getting old and drowning in a sea of knowledge
|
|
Testing for hydrogen.....
I have recently had the need to use compressed Hydrogen for a hydrogenation reaction.......all the chemistry was done fresh catalyst was used but the
hydrogenation uptake failed 4-5 times even though fresh catlayst used each time. Tested for making sure the compound had been chlorinated using the
copper burn test and sure enough the copper soaked material did burn with a green flame.......I focused on the Hydrogen source I, hence filled a
balloon, but the ballon after released found itself on the ground instead of the ceiling as all light gases should rise.
I tried the filled balloon test then at a safe distance ignited it with a candle and it did pop but not sure if it was the pop of the balloon or the
gas igniting pop.
So I'm looking for an alternate method of testing this gas.....I feel the dealer was less than honest with the claims of the contents........solo
P.S.I just did the test tube amber test and no pop......
[Edited on 18-9-2007 by solo]
It's better to die on your feet, than live on your knees....Emiliano Zapata.
|
|
|
stoichiometric_steve
National Hazard
Posts: 827
Registered: 14-12-2005
Member Is Offline
Mood: satyric
|
|
seems like you've been bullshitted. get a gun and take the fucker down!
|
|
|
garage chemist
chemical wizard
Posts: 1803
Registered: 16-8-2004
Location: Germany
Member Is Offline
Mood: No Mood
|
|
Lighting a hydrogen baloon with a candle makes a big impressive fireball. You will absolutely know if the baloon contained hydrogen.
COmpare with a hydrogen baloon filled with hydrogen from e.g. NaOH/Al reaction.
So its probably the gas that is the problem.
Where did you get that cylinder? It would be really strange to get a gas cylinder that contains something else than what it lists on it!
|
|
|
solo
International Hazard
Posts: 3975
Registered: 9-12-2002
Location: Estados Unidos de La Republica Mexicana
Member Is Offline
Mood: ....getting old and drowning in a sea of knowledge
|
|
No fireball.....however what impressed or didn't impress me is the inability of the purported hydrogen filled baloon to rise once release after
securing, as light gas hydrogen gave rise to the blimps back then prior to changing the gas to a non flamable helium.........solo
It's better to die on your feet, than live on your knees....Emiliano Zapata.
|
|
|
chemkid
Hazard to Others
Posts: 269
Registered: 5-4-2007
Location: Suburban Hell
Member Is Offline
Mood: polarized
|
|
what kind of baloons are you using? How big are they? Your ballon just might be too heavy. Burning well, who knows why the hydrogen won't burn.
I agree with stoichiometric_steve, you were probably bs.
Chemkid
|
|
|
solo
International Hazard
Posts: 3975
Registered: 9-12-2002
Location: Estados Unidos de La Republica Mexicana
Member Is Offline
Mood: ....getting old and drowning in a sea of knowledge
|
|
I tend to agree with stoichiometric_steve......and the balloon is the regular size balloon thanks for helping me confirm that i got taken for a ride
into the wasteland........................solo
It's better to die on your feet, than live on your knees....Emiliano Zapata.
|
|
|
not_important
International Hazard
Posts: 3873
Registered: 21-7-2006
Member Is Offline
Mood: No Mood
|
|
The simple tests are -
bubble some through soapy water, see if the bubbles float. The stream of gas must be adjusted to generate free bubbles. This removes the question of
the type of balloon.
try igniting some of the bubbles with a long match.
Try igniting a stream of the gas from a narrow jet, probably should have some anti-flashback arrangement. Hydrogen will burn with a pale blue nearly
invisible flame, organics give flames with strong blue, yellow, or white regions.
Measure out a few cc of the gas at STP, using an inverted container in a gas trough or whatever. Once the volume is noted let it bubble into a
container with a measured severalfold excess of air, and spark it several times to get all the hydrogen to combine. Let it cool back to the original
temperature and measure the new volume, that will let you calculate the amount (if any) of hydrogen in the gas.
I've seen gas cylinders referred to as "hydrogen" by workers using them, that are actually filled with thermally cracked ammonia - 3 H2 to each N2.
|
|
|
chemrox
International Hazard
Posts: 2961
Registered: 18-1-2007
Location: UTM
Member Is Offline
Mood: LaGrangian
|
|
thermally cracked ammonia? no shit?
It's clear Solo got burned. I'm amazed but there is no other conclusion. Hydrogen lifted the Hindenburg and all the other Zeppleins. The Hindenburg
became a fireball and it was no "light baloon."
|
|
|
solo
International Hazard
Posts: 3975
Registered: 9-12-2002
Location: Estados Unidos de La Republica Mexicana
Member Is Offline
Mood: ....getting old and drowning in a sea of knowledge
|
|
Took the tank back to the merchant and tested other tanks with a 6"balloon filled and the balloon dropped to the ground it never rised .....now am I
mistaken that hydrogen gas is not light enough to lift the weight of a 6" balloon filled with hydrogen?........solo
It's better to die on your feet, than live on your knees....Emiliano Zapata.
|
|
|
Axt
National Hazard
Posts: 814
Registered: 28-1-2003
Member Is Offline
Mood: No Mood
|
|
| Quote: | Originally posted by solo
Tested for making sure the compound had been chlorinated using the copper burn test and sure enough the copper soaked material did burn with a green
flame |
Thats the wrong way around, it should be <a href="http://www.sciencemadness.org/talk/viewthread.php?tid=4282&page=1#pid53572">blue if
chlorine is present</a>, green without.
| Quote: | Originally posted by solo
am I mistaken that hydrogen gas is not light enough to lift the weight of a 6" balloon filled with hydrogen? |
6" doesnt seem very big, but I would still think yes. A common "party" balloon of hydrogen lifts rapidly. As Garage Chemist suggested why not produce
it yourself via NaOH/Al and compare the two?
[Edited on 4-10-2007 by Axt]
|
|
|
solo
International Hazard
Posts: 3975
Registered: 9-12-2002
Location: Estados Unidos de La Republica Mexicana
Member Is Offline
Mood: ....getting old and drowning in a sea of knowledge
|
|
| Quote: | [Quote]
Thats the wrong way around, it should be blue if chlorine is present, green without. |
.............review the Beilstein Test,
http://www.hc-sc.gc.ca/cps-spc/prod-test-essai/method/chem-c...
[Edited on 3-10-2007 by solo]
It's better to die on your feet, than live on your knees....Emiliano Zapata.
|
|
|
stoichiometric_steve
National Hazard
Posts: 827
Registered: 14-12-2005
Member Is Offline
Mood: satyric
|
|
| Quote: | Originally posted by solo
Took the tank back to the merchant and tested other tanks with a 6"balloon filled and the balloon dropped to the ground it never rised .....now am I
mistaken that hydrogen gas is not light enough to lift the weight of a 6" balloon filled with hydrogen?........solo |
you really should make some H2 with acid and metal, hydrogen sure lifts up a balloon of that size. 6" is not that big.
|
|
|
chromium
Hazard to Others
Posts: 284
Registered: 27-6-2005
Member Is Offline
Mood: reactive
|
|
| Quote: | Originally posted by solo
Took the tank back to the merchant and tested other tanks with a 6"balloon filled and the balloon dropped to the ground it never rised .....now am I
mistaken that hydrogen gas is not light enough to lift the weight of a 6" balloon filled with hydrogen?........solo |
This is very strange. Party ballons fly without any problem if they are filled with pure hydrogen. I have done this with half-filled ballons that were
even smaller than yours. Maybe your hydrogen is actually mix with something like nitrogen or argon? Or maybe your ballon is exceptionally heavy?
Other properties that might help to identifiy hydrogen: It burns with very pale flame, room must be dark for flame to be visible, if you deliver
hydrogen gas into soap water then you get bubbles that will go airborne if they are big enough, if you touch small bubles with burning match, you
will hear loud pops. Its also characteristic to hydrogrn that it slowly goes through many substances. Party ballon will lose part of its contents with
some hours an PET bottle will do the same with some days.
Edit: Maybe you should ask merchant what is common use of his hydrogen. If its for some technical uses it may be just called "hydrogen" although
actually is some mixture. For example where i live gas for small torches is usually called "propane" although it never is pure propane - usually mix
of propane and butane but in some cases propylene (!) and may even contain 20% of acetone.
[Edited on 4-10-2007 by chromium]
[Edited on 4-10-2007 by chromium]
When all think alike, then no one is thinking. - Walter Lippmann
|
|
|
leu
Hazard to Others
Posts: 368
Registered: 13-10-2005
Member Is Offline
Mood: No Mood
|
|
It's better to do thorough library research and be able to give definitive and exact answers than waste bandwidth speculating  A liter of hydrogen weighs .09 grams  A search through the appropriate literature published before the Hindenburg disaster shows an equivalent weight of
hydrogen will lift 13.4 equivalent weights of balloon equipment  The gas that's
in that tank can't be hydrogen and therefore the merchant owes the customer a refund 
Chemistry is our Covalent Bond
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
