Faal
Harmless
Posts: 8
Registered: 19-8-2007
Member Is Offline
Mood: No Mood
|
|
Purifying and containment of Sulfuric Acid?
I'm interested in purifying sulfuric acid. A source I have says you can take normal (car) battery acid and boil it to produce sulfuric acid, however,
If I remember correctly, acids have a tendancy to 'bump' instead of gradually boil, which makes this very dangerous. IS there a "safe" way to purify
sulfuric acid?
Also once purified, what should it be contained in? I assume Glass (since it dissolves plastic(?)) what kind of lid though would be best, since it can
corrode metals so quickly (and plastic is obviously not an option)
|
|
|
woelen
Super Administrator
Posts: 8012
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
You can fairly safely concentrate sulphuric acid, if you do this outside in a large glass beaker, with a shallow layer of liquid in it. The glass
beaker should of course be real chemical glassware, which does not crack when it is heated.
You really need to do this outside, because thick very corrosvie white fumes are produced in the later stages of the boiling process. You can
concentrate the acid to 85% or so with this method. Probably even better, but the last few percents of water are hard to remove and going well above
95% is not possible with this method (acid + water form an azeotrope).
Once the acid has cooled down, I would store it in the bottle in which you first had the car battery acid. You can use a glass bottle, with a thick
plastic cap. The plastic cap is not eaten away that quickly, because the acid is not in constant contact with the cap. Sulphuric acid has a very low
vapor pressure.
|
|
|
vulture
Forum Gatekeeper
Posts: 3330
Registered: 25-5-2002
Location: France
Member Is Offline
Mood: No Mood
|
|
There are enough thread about this already. Search.
One shouldn't accept or resort to the mutilation of science to appease the mentally impaired.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
