rocketman
Harmless
Posts: 20
Registered: 28-1-2012
Member Is Offline
Mood: No Mood
|
|
Transfer W P to ether
Guys can you help? I have a pea-size amount of white Phosp. in water. I want to transfer it to ether with as little water contamination as possible.
How to transfer the white P. to ether? thanks. 
|
|
|
Sulaiman
International Hazard
Posts: 3697
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
W P will auto-ignite in warm air (I have done it), but not cold.
I don't have a procedure but everything very cold is a good start.
|
|
|
DraconicAcid
International Hazard
Posts: 4334
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
Can you work under nitrogen? Adding a substance that will auto-ignite in warm air to a solvent whose vapours will detonate with a spark seems like a
recipe for disaster.
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
|
wg48
National Hazard
Posts: 821
Registered: 21-11-2015
Member Is Offline
Mood: No Mood
|
|
I have transferred WP to CS2. Here would be my method today. I suggest you first cool (~0C) Then quickly dry the WP with a filter paper and quickly
transferring the WP into the CS2. The CS2 should be in a stoppered container and only unstoppered for the second or two required to drop in the
pellet of WP. Make certain that any heavy fumes from previous manipulation of the SC2 have dispersed and the stock bottle is closed and not near by.
Be prepared for the mild pop if ignition does occur (don’t knock the contains of SC2 over) and be ready to restopper the CS2. Use a contains with
a minimum of head space or preferably purges with argon or CO2 (heaver than nitrogen and air). Preferably prepare the solution in the container it
will be used in.
Obviously its important not to spill the WP solution particularly on yourself TAKE PRECUATIONS
Borosilicate glass:
Good temperature resistance and good thermal shock resistance but finite.
For normal, standard service typically 200-230°C, for short-term (minutes) service max 400°C
Maximum thermal shock resistance is 160°C
|
|
|
Sulaiman
International Hazard
Posts: 3697
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
There is more than a little concern here.
WP in a solvent is scary because when the solvent evaporates it leaves a deposit of very active phosphorous.
Very prone to auto-ignition, on your skin or clothes or almost any non-heat-conducting material,
- near the bulk of your phosphorous-in-volatile-flammable-solvent ........
Extreme case, as a youth: Phosphorous in CS2 poured over c5g NaClO3 (weed-killer),
some random time later - an un-contained explosion that cracked a concrete slab and sounded like nearby lightning 
(it seemed more brissant than silver acetylide which was my most powerful explosive)
Never tried that one again 
[Edited on 18-8-2018 by Sulaiman]
|
|
|
Deathunter88
National Hazard
Posts: 519
Registered: 20-2-2015
Location: Beijing, China
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by Sulaiman  | WP in a solvent is scary because when the solvent evaporates it leaves a deposit of very active phosphorous.
Very prone to auto-ignition, on your skin or clothes or almost any non-heat-conducting material,
- near the bulk of your phosphorous-in-volatile-flammable-solvent ........
Extreme case, as a youth: Phosphorous in CS2 poured over c5g NaClO3 (weed-killer),
some random time later - an un-contained explosion that cracked a concrete slab and sounded like nearby lightning
(it seemed more brissant than silver acetylide which was my most powerful explosive)
Never tried that one again
[Edited on 18-8-2018 by Sulaiman] |
Anyone wanting to see the effect should see this video: https://www.youtube.com/watch?v=Z1MVoE7KgcY
I remember seeing it a long time ago and being completely amazed.
|
|
|
wg48
National Hazard
Posts: 821
Registered: 21-11-2015
Member Is Offline
Mood: No Mood
|
|
Nice find dh88. There was something similar demonstrated on a science programme I think on the BBC around the late sixties and it amazed me too.
We should get the slow motion guys on utube to capture it
Borosilicate glass:
Good temperature resistance and good thermal shock resistance but finite.
For normal, standard service typically 200-230°C, for short-term (minutes) service max 400°C
Maximum thermal shock resistance is 160°C
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
