alking
Hazard to Others
Posts: 252
Registered: 11-3-2016
Member Is Offline
Mood: No Mood
|
|
Where can you purchase teflon sleeves/cuffs?
I'm looking for some 24/29 teflon sleeves. I see them pop up on ebay from time to time, but they're often well overpriced and they seem to be pretty
rare. Are they not very popular or something? I figured anyone who does vacuum distillations often, which is very common, would have a set of these
instead of continuing to use grease and clean it up after all the time. Are there any downsides to using sleeves over grease?
|
|
|
Sulaiman
International Hazard
Posts: 3697
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
If a group buy is necessary for a good price then I'll buy some.
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
|
alking
Hazard to Others
Posts: 252
Registered: 11-3-2016
Member Is Offline
Mood: No Mood
|
|
I'd like about 8 if anyone wants to go in.
|
|
|
Deathunter88
National Hazard
Posts: 519
Registered: 20-2-2015
Location: Beijing, China
Member Is Offline
Mood: No Mood
|
|
PTFE plumber's tape works just about as well, and a lot cheaper too.
|
|
|
alking
Hazard to Others
Posts: 252
Registered: 11-3-2016
Member Is Offline
Mood: No Mood
|
|
I do use plumbers tape for vacuum filtration because there's no heat, no significant solvent interaction, and if it's not a complete seal it's not a
big deal, but it seems like more trouble than it's worth to rely on it to seal numerous joints for a vacuum distillation. You need a perfect seal and
if there's a leak it's much harder to detect which one(s) are affected where as with vacuum grease there are generally visual queues.
edit: And I'm not aware of any colorless plumbers tape. I've used the white stuff for a reflux or something before and it was clear afterward so even
the white tape is dyed.
[Edited on 13-5-2018 by alking]
|
|
|
Sulaiman
International Hazard
Posts: 3697
Registered: 8-2-2015
Location: 3rd rock from the sun
Member Is Offline
|
|
Clear ptfe sounds like a money maker 
CAUTION : Hobby Chemist, not Professional or even Amateur
|
|
|
weilawei
Hazard to Others
Posts: 130
Registered: 3-12-2017
Member Is Offline
Mood: No Mood
|
|
eBay is your friend here, bu a word of warning. They tend to seal poorly, and they are difficult to remove from the joint without crinkling or damage.
I own a set, but I virtually never use them for these reasons.
|
|
|
MrHomeScientist
International Hazard
Posts: 1806
Registered: 24-10-2010
Location: Flerovium
Member Is Offline
Mood: No Mood
|
|
Another reason might be that a tube of grease is a lifetime supply. So once people buy one they aren't in the market for anything anymore. I use
silicone grease I found in the plumbing section, and that'll last me forever. Cleanup isn't bad; just a quick wipe with a paper towel and it's fine.
|
|
|
Deathunter88
National Hazard
Posts: 519
Registered: 20-2-2015
Location: Beijing, China
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by alking  | I do use plumbers tape for vacuum filtration because there's no heat, no significant solvent interaction, and if it's not a complete seal it's not a
big deal, but it seems like more trouble than it's worth to rely on it to seal numerous joints for a vacuum distillation. You need a perfect seal and
if there's a leak it's much harder to detect which one(s) are affected where as with vacuum grease there are generally visual queues.
edit: And I'm not aware of any colorless plumbers tape. I've used the white stuff for a reflux or something before and it was clear afterward so even
the white tape is dyed.
[Edited on 13-5-2018 by alking] |
Most of the time when you do vacuum distillation you don't want/need a perfect seal. You should be using a pump that can readily compensate for the
leakage which occurs anyways.
|
|
|
alking
Hazard to Others
Posts: 252
Registered: 11-3-2016
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by Deathunter88 | | Quote: Originally posted by alking | I do use plumbers tape for vacuum filtration because there's no heat, no significant solvent interaction, and if it's not a complete seal it's not a
big deal, but it seems like more trouble than it's worth to rely on it to seal numerous joints for a vacuum distillation. You need a perfect seal and
if there's a leak it's much harder to detect which one(s) are affected where as with vacuum grease there are generally visual queues.
edit: And I'm not aware of any colorless plumbers tape. I've used the white stuff for a reflux or something before and it was clear afterward so even
the white tape is dyed.
[Edited on 13-5-2018 by alking] |
Most of the time when you do vacuum distillation you don't want/need a perfect seal. You should be using a pump that can readily compensate for the
leakage which occurs anyways. |
Why is that? I can't see any benefit in not using a closed system for 99% of distillations.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
