Sciencemadness Discussion Board
Not logged in [Login ]
Go To Bottom

Printable Version  
Author: Subject: How do I remove the smell of Benzyl Chloride from skin
Rhodanide
Hazard to Others
***




Posts: 348
Registered: 23-7-2015
Location: The 80s
Member Is Offline

Mood: That retro aesthetic

[*] posted on 26-2-2018 at 06:20
How do I remove the smell of Benzyl Chloride from skin


I have a small amount of Benzyl Chloride in a sealed bottle. While looking for a few chemicals, I picked up the bottle and moved it a few feet. I should add that I had no gloves, but the bottle was clean on the outside! I guess by just doing this, the vapor "stuck" to my hands! It left behind a musty smell, sort of like brick dust. Washing with water won't get rid of it. Soap won't kill it. Fairly concentrated Sodium Hydroxide solution won't do it, even (Yes, I was that desperate). What the hell do I do? Wait for it to dissipate? How do I handle it in the future? I only have a tiny amount of unknown concentration, less than 20mL. It was produced by the radical Chlorination of Toluene.



View user's profile View All Posts By User
Tsjerk
International Hazard
*****




Posts: 3032
Registered: 20-4-2005
Location: Netherlands
Member Is Offline

Mood: Mood

[*] posted on 26-2-2018 at 11:27


The smell is caused by chlorinated proteins, you won't get rid of it until your skin is renewed. I guess it takes a long as trinitrophenol stains take to disappear; about three weeks.
View user's profile View All Posts By User
zed
International Hazard
*****




Posts: 2283
Registered: 6-9-2008
Location: Great State of Jefferson, City of Portland
Member Is Offline

Mood: Semi-repentant Sith Lord

[*] posted on 26-2-2018 at 16:52


Way I recall, it is easier to make it from Benzyl Alcohol.

Nasty stuff. I cry when I think about it.
View user's profile View All Posts By User
Magpie
lab constructor
*****




Posts: 5939
Registered: 1-11-2003
Location: USA
Member Is Offline

Mood: Chemistry: the subtle science.

[*] posted on 26-2-2018 at 16:58


Sodium tetraborate decahydrate (Boraxo) makes an excellent non-toxic cleaner for dirty/greasy hands after doing auto-mechanic work. I suggest you try that. It is my go-to cleaner for my hands. If it doesn't work try Bartender's Friend which contains oxalic acid. As a last resort, try 3M abrasive pads.



The single most important condition for a successful synthesis is good mixing - Nicodem
View user's profile View All Posts By User
wg48
National Hazard
****




Posts: 821
Registered: 21-11-2015
Member Is Offline

Mood: No Mood

[*] posted on 26-2-2018 at 23:57


For dirty greasy oily auto mechanic hands I recommend diy Swarfega, a 50/50 mixture of cooking oil and washing up liquid.

Alternatively solubilize the grease and oil by washing/massaging your dry(no water) hands with cooking oil then with washing up liquid, rinse and dry. A nail brush helps too.
View user's profile View All Posts By User

  Go To Top