Pumukli
National Hazard
Posts: 705
Registered: 2-3-2014
Location: EU
Member Is Offline
Mood: No Mood
|
|
Dimethylamine storage
Dear all,
I would like to save some dimethylamine from wasting as a herbicide component and thought that I should distill it out with the help of a strong base
instead. 
Question is what should I do to store it? I envisioned some nice crystalls in a jar but I'm not sure which anion wold be the best for that porpuse.
Chloride salt of dimethylamine is hygroscopic as I heard.
I would like to use an acid with which the formed salt would be non-hygroscopic, has a fair solubility in water and preferably crystallizes without
crystal-water. The smaller the molecular weight (or equivalent weight) the better.
Suggestions?
|
|
|
Eddygp
National Hazard
Posts: 858
Registered: 31-3-2012
Location: University of York, UK
Member Is Offline
Mood: Organometallic
|
|
Maybe dimethylammonium tetrafluoroborate, as long as you have access to it? In principle, any of its simple salts should be very soluble in water,
unless you use some weird 161-carbon chain acid.
Halogens will probably not get what you need. What about coordinating it to a metal or something and storing the metal as a salt? Probably much more
complicated, but nice and exotic crystals!
there may be bugs in gfind
[ˌɛdidʒiˈpiː] IPA pronunciation for my Username |
|
|
zed
International Hazard
Posts: 2283
Registered: 6-9-2008
Location: Great State of Jefferson, City of Portland
Member Is Offline
Mood: Semi-repentant Sith Lord
|
|
Ummm. Dimethylamine free-base used to be available in sealed glass ampules. It's a low boiler, so sealing is a must.
Nothing wrong with storing it as the Chloride salt. Or perhaps, the Sulfate. Just use an airtight jar.
Just capture your free base in an anhydrous alcohol, and gas it with HCl....or, treat it with H2SO4. But, perhaps I am hasty!
I'll check Vogel for pointers. I'm not too sure about solubility of salts, now that I think about it.
"111.118, D1METHYLAMINE HYDROCHLORIDE
Proceed as in the preparation of methylamine hydrochloride (previous
Section) using 200 g. of ammonium chloride and 400 g. of formalin, and
heat the mixture at 104° until no more liquid distils. Cool to room
temperature and filter off the ammonium chloride (ca. 50 g.) : add 300 g.
of formalin to the filtrate, return the solution to the distilling flask, heat
until the temperature reaches 115° and maintain it as nearly as possible
at this temperature until no more liquid passes over (about 3-4 hours).
Concentrate the residue in the distilling flask on a water bath until a
scum appears on the surface of the hot liquid. Cool to room temperature
and filter off the solid (ca. 32 g.; impure methylamine hydrochloride
containing about 25 per cent, of ammonium chloride). Pour back the
filtrate into the distilling flask and heat to 120° until a sample of the
liquid, on cooling, becomes semi-solid. Transfer it to a vacuum desiccator
charged with sodium hydroxide pellets and leave it there for 2 days.
Extract the residue with hot chloroform and filter ; on cooling, crystals
of dimethylamine hydrochloride separate. A further crop can be obtained
by evaporating the filtrate to about half its original volume. The yield
is 120 g."
Ummm. Vogel suggests crystallizing from hot Chloroform....and drying in a vacuum desiccator. I don't like that idea.
[Edited on 18-7-2017 by zed]
[Edited on 18-7-2017 by zed]
|
|
|
Melgar
Anti-Spam Agent
Posts: 2004
Registered: 23-2-2010
Location: Connecticut
Member Is Offline
Mood: Estrified
|
|
Quote: Originally posted by Eddygp  | | Maybe dimethylammonium tetrafluoroborate, as long as you have access to it? In principle, any of its simple salts should be very soluble in water,
unless you use some weird 161-carbon chain acid. |
I just read a bit about tetrafluoroborates, and they're not actually as exotic as I thought. Granted, I live in Manhattan and work in the garment
district area, but I've seen multiple places that sell hydrofluoric acid, (you can barely read the main label with all the warning labels on the
bottle, so you can be sure it's the right stuff ) Not highly concentrated
(~10%?), but it wouldn't have to be, since apparently it's one of the most inert ions that exists with a -1 charge after HF reacts with boric acid and
the resulting tetrafluoroboric acid is neutralized.
Of course, that would be overkill, since I see no reason that the sulfate salt wouldn't work, and that's what's used to stabilize hydrazine.
The first step in the process of learning something is admitting that you don't know it already.
I'm givin' the spam shields max power at full warp, but they just dinna have the power! We're gonna have to evacuate to new forum software!
|
|
|
Pumukli
National Hazard
Posts: 705
Registered: 2-3-2014
Location: EU
Member Is Offline
Mood: No Mood
|
|
Thanks for the tips guys!
Mentioning "nice crystalls" may misled some of you though!
I think the tetrafluoroboric acid would probably make some nice, well-defined non-hygroscopic crystalls but it would be overkill for my real aim: I
want to store dimethylamine as a solid and be able to release it when I need some!
Chloride would be the obvious choice but it makes a hygroscopic salt and I don't want to recryst. from chloroform and use a vacuum desiccator (Vogel)
just to postpone the obvious end: some sticky mass in a jar that once was nice powder. :-)
What I did so far: tried to distill some dimethylamine (DMA) from the herbicide. It did not went too well, I obtained some 30% yield, although the
scale (5 g) was too small for my equipment and I learnt some insight on how the actual distillation goes. Based on these observations I can/will
improve the next try.
What I want to achieve first is some fairly pure DMA as aquaeous solution. Then I plan to make a series of neutralizations in a 0.5g scale with
different acids. Organic acids and inorganics as well -what I can find among my chems- and evaporate the water from each in a petri dish. The
hygroscopic ones will fail to dry, but I hope that I will be able to find at least one which yields some nice crystalls or at least a non-hygroscopic
dry powder without resorting to vacuum desiccation. :-)
I know I could store the distilled solution too but somehow I prefer a dry powder to a smelly, corrosive liquid. :-)
|
|
|
Pumukli
National Hazard
Posts: 705
Registered: 2-3-2014
Location: EU
Member Is Offline
Mood: No Mood
|
|
I've tried eight different acids so far. The results were interesting so I'm planning to run a quick and dirty "challenge" for you all. :-)
Basically all you should do is to predict which acid produced which result (selectable from a few different answers).
I'm still waiting for two more acidic compounds to test and thinking about the prize for the winner. :-)
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
