TheDrowner
Banned
Posts: 5
Registered: 14-1-2007
Member Is Offline
Mood: No Mood
|
|
Epsom Salts
Is it possible to make an 'effective' smoke bomb, that produces smoke approximately 60 times its volume with magnesium sulphate ( epsom salts ).
If it is, could you explain how???
TheDrowner
[Edited on 15-1-2007 by TheDrowner]
\"The blood seeps through the cracks\"
|
|
|
YT2095
International Hazard
Posts: 1091
Registered: 31-5-2003
Location: Just left of Europe and down a bit.
Member Is Offline
Mood: within Nominal Parameters
|
|
I`ve never heard of that one before? are you sure it`s not out of one of these Crapbooks?
Ammonium Chloride is Much better.
\"In a world full of wonders mankind has managed to invent boredom\" - Death
Twinkies don\'t have a shelf life. They have a half-life! -Caine (a friend of mine)
|
|
|
woelen
Super Administrator
Posts: 8012
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
MgSO4 can make a smoke bomb. Crunch it to a VERY fine powder and throw it in the air. Instant smoke!
|
|
|
guy
National Hazard
Posts: 982
Registered: 14-4-2004
Location: California, USA
Member Is Offline
Mood: Catalytic!
|
|
LOL!
No offense, but try to learn a little bit about chemistry first.
|
|
|
Chemist514
Hazard to Self
Posts: 68
Registered: 12-5-2006
Member Is Offline
Mood: No Mood
|
|
| Quote: | Originally posted by TheDrowner
Is it possible to make an 'effective' smoke bomb, that produces smoke approximately 60 times its volume with magnesium sulphate ( epsom salts ).
If it is, could you explain how???
TheDrowner
[Edited on 15-1-2007 by TheDrowner] |
I have really only seen this used in the lab as a dessicant, no students ever "borrow" it, that tells me that its prolly a reagent interesting to
people interested in actual chemistry...
I sense though that sice you are saying things like 60 times its volume etc that someone told you it can. I suspect they were lying. but maybe somebdy
here with some history of being knowledgable could say for sure.
all the best.
P.S : I recommend not using epsom salts to dry organics.. prolly too low grade. but then again, i know very little.
|
|
|
Ozone
International Hazard
Posts: 1269
Registered: 28-7-2005
Location: Good Olde USA
Member Is Offline
Mood: Integrated
|
|
Epsom salt is the heptahydrated form. For drying, anhydrous MgSO4 is required.
It dries organics very well, for example, a sample of activated sewage-sludge (70-90% water) can be rendered completely dry by grinding with MgSO4
(dry enough to extract w/DCM and get 90-105% recovery of surrogate, say, decachlorobiphenyl). The heat of hydration is significant.
It also works well for drying out your extract when that inevitable small amount of water gets through your sep funnel. Just dump in a little, swirl,
settle and decant (although, I prefer Na2SO4 for this purpose as the grains are larger, and thus more difficult to acidentally "decant".
You will not make smoke bombs from this (NH4Cl will do it-well). As for stink bombs--epsom salt is a pretty good laxative.
Funny Woelen !
Please search the site,
O3
-Anyone who never made a mistake never tried anything new.
--Albert Einstein
|
|
|
Chemist514
Hazard to Self
Posts: 68
Registered: 12-5-2006
Member Is Offline
Mood: No Mood
|
|
| Quote: | Originally posted by Ozone
Epsom salt is the heptahydrated form. For drying, anhydrous MgSO4 is required.
It dries organics very well, for example, a sample of activated sewage-sludge (70-90% water) can be rendered completely dry by grinding with MgSO4
(dry enough to extract w/DCM and get 90-105% recovery of surrogate, say, decachlorobiphenyl). The heat of hydration is significant.
It also works well for drying out your extract when that inevitable small amount of water gets through your sep funnel. Just dump in a little, swirl,
settle and decant (although, I prefer Na2SO4 for this purpose as the grains are larger, and thus more difficult to acidentally "decant".
You will not make smoke bombs from this (NH4Cl will do it-well). As for stink bombs--epsom salt is a pretty good laxative.
Funny Woelen!
Please search the site,
O3 |
Hmmnn... would one be able to dry regular epsom salts so that it may be used? much cheaper buying drugstore epsom salts then ACS grade for me!
I did purchase some anhydrous sodium sulfate, but 500 grams only and it was very expensive, this soulds like something to note for the future as
oposed to spending hundreds on 2 kilos of magnesium sulfate (anhydrous..)
(the grad students go through LOTS of both of these chemicals.. so i had them on my list to get)
The very best to you.
|
|
|
pantone159
National Hazard
Posts: 590
Registered: 27-6-2006
Location: Austin, TX, USA
Member Is Offline
Mood: desperate for shade
|
|
I make my drying agent from MgSO4-7H2O, I put it in the oven for 2 hours at (nominally) 525 F (275 C). [Sorry for the wierd units but that is how my
oven is labeled  ]
This actually seems to only dehydrate it to the monohydrate, but this is a fine powder as expected and it seems to work.
|
|
|
YT2095
International Hazard
Posts: 1091
Registered: 31-5-2003
Location: Just left of Europe and down a bit.
Member Is Offline
Mood: within Nominal Parameters
|
|
Not really, no.
what is the Chemical?
\"In a world full of wonders mankind has managed to invent boredom\" - Death
Twinkies don\'t have a shelf life. They have a half-life! -Caine (a friend of mine)
|
|
|
Baphomet
Hazard to Others
Posts: 211
Registered: 19-11-2006
Member Is Offline
Mood: No Mood
|
|
baleeted
[Edited on 22-1-2007 by Baphomet]
[Edit: no recipies please! ]
[Edited on 22-1-2007 by Ramiel]
\"Who ARE you? You\'re like the drummer from REO Speedwagon - nobody knows who you are\" from \'Employee of the Month\'
|
|
|
Levi
Hazard to Others
Posts: 196
Registered: 24-1-2007
Member Is Offline
Mood: No Mood
|
|
@ Chemist514 Epsom salt (MgSO4 * 7H2O) is dirt cheap as is Washing soda (Na2CO3). To avoid paying more than you should for Sodium Sulfate you could
probably make your own by dissolving epsom salt and washing soda.
MgSO4(aq) + Na2CO3(aq) --> Na2SO4(aq) + MgCO3(s)
If i'm right, the magnesium carbonate will precipitate leaving you with a Sodium sulfate solution which can then be decanted and dried by heating.
Anyone know for certain if this method will work?
[Edited on 26-1-2007 by Levi]
|
|
|
Chemist514
Hazard to Self
Posts: 68
Registered: 12-5-2006
Member Is Offline
Mood: No Mood
|
|
| Quote: | Originally posted by Levi
@ Chemist514 Epsom salt (MgSO4 * 7H2O) is dirt cheap as is Washing soda (Na2CO3). To avoid paying more than you should for Sodium Sulfate you could
probably make your own by desolving epsom salt and washing soda.
MgSO4(aq) + Na2CO3(aq) --> Na2SO4(aq) + MgCO3(s)
If i'm right, the magnesium carbonate will precipitate leaving you with a Sodium sulfate solution which can then be decanted and dried by heating.
Anyone know for certain if this method will work? |
I'll certainly try it this weekend, just let me clean up a few other things. ( no less then 3 labs are moving where i work and as a janitor that gives
me much garbage.. erm i mean loot. lol) all the best!
|
|
|
Levi
Hazard to Others
Posts: 196
Registered: 24-1-2007
Member Is Offline
Mood: No Mood
|
|
I can save you the trial run as I've just attempted it myself. Epsom salts and washing soda do indeed yield an insoluble preciptate which can only be
MgCO<sub>3</sub>. Large scale production of Na<sub>2</sub>SO<sub>4</sub> can be done on your first attempt. Make
sure you pour slowly when mixing the two solutions or you'll have to wait forever before you can decant. The harvested solution should be heated
beyond dryness to remove all of the water and convert any NaHSO4. If you intend to keep the Mg precipitate also and are using a saturated solution
you will want to pay attention to the temperature of both solutions as combining them may drop the temperature and cause
Na<sub>2</sub>CO<sub>3</sub> to fall out of the solution and contaminate your MgCO<sub>3</sub>. Hope this helps.
[Edited on 26-1-2007 by Levi]
|
|
|
woelen
Super Administrator
Posts: 8012
Registered: 20-8-2005
Location: Netherlands
Member Is Offline
Mood: interested
|
|
How do you assure you have pure Na2SO4? Just a little too much or too little of one of the starting materials yields either contamination with Mg(2+)
ions or CO3(2-) ions.
Do you recrystallize to get rid of the impurity? Both Na2CO3.10H2O and MgSO4.7H2O are not the best chems to weigh precisely (either efflorescent or
hygroscopic to some extent).
|
|
|
UnintentionalChaos
International Hazard
Posts: 1454
Registered: 9-12-2006
Location: Mars
Member Is Offline
Mood: Nucleophilic
|
|
Since the materials so cheap, multiple recrystallizations are very useful. You can also exploit its odd solubility curve. Chilling a boiling hot
saturated solution to 5C will force about 5/6 of the Na2SO4 out of solution into crystals of decahydrate. This can be achieved in a few hours. This
can then be rinsed in a filter paper with ice water to remove any remaining contaminated solution with minimal losses of Na2SO4. 3 recrystallizations
turned some foul waste solutions of mine into snow white anhydrous powder.
Department of Redundancy Department - Now with paperwork!
'In organic synthesis, we call decomposition products "crap", however this is not a IUPAC approved nomenclature.' -Nicodem
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
