Sciencemadness Discussion Board
Not logged in [Login ]
Search the forums Search   Frequently Asked Questions FAQ   View member list Member List   Today's Posts Today's Posts   Forum Stats Stats Back to: sciencemadness.org
Sciencemadness Discussion Board » Engineering and Equipment » Reagents and Apparatus Acquisition » Scilogex Hot plate and Stirrer with no Power Go To Bottom

Printable Version  
Author: Subject: Scilogex Hot plate and Stirrer with no Power
Nayascm
Harmless
*



Posts: 1
Registered: 24-4-2017
Member Is Offline

Mood: No Mood

[*] posted on 24-4-2017 at 20:12
Scilogex Hot plate and Stirrer with no Power

I am a beginner in Electronics and I do need a rundown on things to check to find out where the fault is in the MS-HS Scilogex Hotplate stirrer, as no power is seen at all when plugged.

Fuse and power output to the PCB is checked with multimeter and V reading is 120 V between L and N at the PCB soder.
Further not so sure where to check and how - any details or guidance will be very much appreciated.
View user's profile View All Posts By User
j_sum1
Administrator
********



Posts: 6320
Registered: 4-10-2014
Location: At home
Member Is Offline

Mood: Most of the ducks are in a row

[*] posted on 24-4-2017 at 22:07


Hard to tell. It might be easier if you post some photos of the innards of the thing.
View user's profile View All Posts By User

 Sciencemadness Discussion Board » Engineering and Equipment » Reagents and Apparatus Acquisition » Scilogex Hot plate and Stirrer with no Power   Go To Top