BILLBUILDS
Hazard to Self
Posts: 82
Registered: 19-3-2016
Member Is Offline
Mood: No Mood
|
|
is nitromethane any good as a solvent
im buying some nitromethane and theres a larger quantity and i was wondering if it haas any use in the lab such as a solvent or something else?
|
|
|
Metacelsus
International Hazard
Posts: 2539
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline
Mood: Double, double, toil and trouble
|
|
Yes; I've used it once before as a reaction solvent, when I was trying a bunch of different solvents for a particular reaction to find the one that
gave the best yield. (Chloroform ended up winning.) Nitromethane is relatively uncommon to use as a solvent, however.
|
|
|
karlos³
International Hazard
Posts: 1520
Registered: 10-1-2011
Location: yes!
Member Is Offline
Mood: oxazolidinic 8)
|
|
It is good as cosolvent for some FC-reactions, like 3-acylation of indole.
But besides this, it is rarely used as solvent.
|
|
|
Kapitan
Harmless
Posts: 9
Registered: 15-7-2013
Location: /dev/urandom
Member Is Offline
Mood: No Mood
|
|
I've used it as a solvent for metal complexes on several occasions. It's in an unusual place where it's very polar and aprotic, but also basically
non-coordinating.
|
|
|
JJay
International Hazard
Posts: 3440
Registered: 15-10-2015
Member Is Offline
|
|
I don't think much of it as a solvent, but I used to use it for cleaning glassware when I had two gallons of it that I obtained for free. It dissolves
some things that denatured alcohol won't touch. It's cleaner-burning than gasoline and burns hotter than alcohol.
[Edited on 3-3-2017 by JJay]
|
|
|
Metacelsus
International Hazard
Posts: 2539
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline
Mood: Double, double, toil and trouble
|
|
Keep in mind that its pKa is 10.2, so I don't think it can be considered aprotic (if one defines protic as "containing a labile H+"). For
comparison, methanol's pKa is 15.5, so nitromethane is more than 100,000 times as acidic. Nitromethane won't act as a hydrogen bond donor, however.
To elaborate on the reaction I was talking about earlier in the thread: it involved a complicated rearrangement of a zwitterion formed by trapping of
a benzyne. The solvent had to be acidic enough to donate a proton to the carbanion, but most normal protic solvents (alcohols, amines, carboxylic
acids, etc.) would cause side reactions with the benzyne. Chloroform was best in the end.
[Edited on 3-3-2017 by Metacelsus]
|
|
|
Chemetix
Hazard to Others
Posts: 375
Registered: 23-9-2016
Location: Oztrayleeyah
Member Is Offline
Mood: Wavering between lucidity and madness
|
|
Holy hell is it a good solvent!! It gels Nitrocellulose beautifully, and will solvate resins that other things won't touch. Nitroethane does a better
job for some resins and glues I found. I decanted some NM off one day while out in a remote area, and while in the process of adding a small amount of
aliphatic amine to the aliquot, I set the bottle of NM down on the bonnet of my car. A drop had run down the side and made a ring with the base in
contact with the bonnet. It was back to bare metal in half an hour.
|
|
|
clearly_not_atara
International Hazard
Posts: 2789
Registered: 3-11-2013
Member Is Offline
Mood: Big
|
|
| Quote: | | i was wondering if it haas any use in the lab |
Nitromethane can be converted to hydroxylamine and carbon monoxide by concentrated sulfuric acid, for one. I think iron powder will reduce
nitromethane to formaldoxime.
It will also condense with paraformaldehyde to form nitroethanol and nitroethylene; nitroethylene is a useful dienophile and can be reduced to
variously nitroethane, acetaldoxime, or ethylamine by various methods, which are also useful. Acetaldoxime is easily converted to acetonitrile or
acetaldehyde.
Nitromethane can also be used as a solvent, but it's more interesting as an intermediate, IMO.
|
|
|
Texium
|
Thread Moved
3-3-2017 at 15:11 |
Melgar
Anti-Spam Agent
Posts: 2004
Registered: 23-2-2010
Location: Connecticut
Member Is Offline
Mood: Estrified
|
|
Nitromethane is the only thing I have that will dissolve super glue (cyanoacrylate). It will dissolve other acrylic polymers as well. It reacts with
too many things to make for a very good reaction solvent, but it's great if all you care about is getting something into solution.
|
|
|
JJay
International Hazard
Posts: 3440
Registered: 15-10-2015
Member Is Offline
|
|
Acetone will dissolve cyanoacrylate but not very effectively. Halogenated solvents like DCM will dissolve cyanoacrylate more easily than nitromethane.
|
|
|
Db33
Hazard to Others
Posts: 206
Registered: 25-11-2016
Member Is Offline
Mood: No Mood
|
|
I consider Nitromethane not as a great solvent but DEFINITELY a useful chem in any lab.
|
|
|
Rhodanide
Hazard to Others
Posts: 348
Registered: 23-7-2015
Location: Ｔｈｅ ８０ｓ
Member Is Offline
Mood: That retro aesthetic
|
|
Quote: Originally posted by BILLBUILDS  | | im buying some nitromethane and theres a larger quantity and i was wondering if it haas any use in the lab such as a solvent or something else?
|
Can be made into some NASTY, NASTY stuff.
|
|
|
Melgar
Anti-Spam Agent
Posts: 2004
Registered: 23-2-2010
Location: Connecticut
Member Is Offline
Mood: Estrified
|
|
Oh, nitromethane can be mixed with MEK and various other volatile organics to make a really hot-burning lamp fuel, that doesn't create soot. This can
be useful on occasion if you need an improvised heat source that burns hot, but you don't want to blacken your glass. The flame also looks pretty
cool. It's sort of greyish-white. Nitromethane mixed with a small amount of benzyl alcohol will burn with a really hot yellow-white flame, since the
nitromethane can produce enough oxygen to burn the soot that's formed while it's still hot enough to burn.
|
|
|
Aqua-regia
Hazard to Others
Posts: 126
Registered: 18-12-2006
Member Is Offline
Mood: No Mood
|
|
Good inert solution for nitrating solid organics For example naphtalene.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
