alking
Hazard to Others
Posts: 252
Registered: 11-3-2016
Member Is Offline
Mood: No Mood
|
|
When drying salts how do you prevent cake formation sticking to glass?
If the salt is non reactive with Aluminum I could put some foil under it, but otherwise I don't see a way around this, and aluminum is often reactive.
For instance I wouldn't trust it with some copper chloride. So once it's stuck I either lose some product or worse some glasswear. Are there any
tricks I'm not aware of?
|
|
TheMrbunGee
Hazard to Others
Posts: 364
Registered: 13-7-2016
Location: EU
Member Is Offline
Mood: Phosphorising
|
|
How about using plastic containers to dry them?
|
|
Chlorine
Hazard to Self
Posts: 56
Registered: 26-11-2016
Location: Maine, USA
Member Is Offline
Mood: Brominated
|
|
You can dry them on a coffee filter with some paper towel underneath, however, you will loose a small percentage of your product. You could also use a
plastic watch glass, you'll recover all of your product but you'll scratch the plastic up pretty bad.
|
|
WGTR
National Hazard
Posts: 971
Registered: 29-9-2013
Location: Online
Member Is Offline
Mood: Outline
|
|
Solid PTFE sheet? Not very many things will stick to Teflon. It looks like ePlastics sells something like this.
http://www.eplastics.com/Plastic?search=Ptfe
Otherwise, maybe some non-stick cookware.
|
|
MrHomeScientist
International Hazard
Posts: 1806
Registered: 24-10-2010
Location: Flerovium
Member Is Offline
Mood: No Mood
|
|
ePlastics is a great company. Their sales reps work closely with you to make sure you get exactly what you need. I've worked with them several times
in the past for my periodic table display projects. You buy one large sheet of plastic and pay for the number of cuts you need to produce the parts
you want. You pay for a range of cuts (i.e. 10 - 20 cuts = $X.xx), so they actually cut the rest of the sheet for me and I got a bunch of extra pieces
for free.
Slightly off topic but I wanted to put in a good word for them
|
|
Eddygp
National Hazard
Posts: 858
Registered: 31-3-2012
Location: University of York, UK
Member Is Offline
Mood: Organometallic
|
|
There are a few impermeability/anti-stick spray on products around. You could potentially use that on a plastic watchglass (watchplastic ) and see whether it goes better.
there may be bugs in gfind
[ˌɛdidʒiˈpiː] IPA pronunciation for my Username
|
|
DJF90
International Hazard
Posts: 2266
Registered: 15-12-2007
Location: At the bench
Member Is Offline
Mood: No Mood
|
|
I don't see what the problem is? Just scrape it with a spatula.
|
|
alking
Hazard to Others
Posts: 252
Registered: 11-3-2016
Member Is Offline
Mood: No Mood
|
|
A teflon sheets sounds great. Wouldn't plastics melt though? What kind of plastics did you have in mind? CuSO4 which is what made me question this
dehydrates at ~205C or so iirc, so the plastic must stand to at least 250-300C.
Just scraping with a spatula doesn't always work. Often I will have products fused to the sheet tightly. If it's something like MgSO4 or something
really cheap I don't mind losing 10% by washing it out, but for instance this time I have about half of my CuSO4 stuck to the glass. So not only did I
only get a 50% 'yield' but the CuSO4 is not super cheap (not that it's expensive) and it's not something I'd want to wash out and dump down the drain
in appreciable quantity due to the toxicity as well.
|
|
Herr Haber
International Hazard
Posts: 1236
Registered: 29-1-2016
Member Is Offline
Mood: No Mood
|
|
Teflon is great. Unless you'll be putting in something that is sensitive to static in which case I would not recommend it.
(Thanks for the supplier by the way)
But for what you seem to be doing, maybe some aluminium trays could be used ? The thin ones you get your food in at lunchtime, not the heavy duty ones
actually used for cooking.
I got some for that very purpose from a cooking / kitchen store. They exist in all sizes, are cheap and will withstand the heat in the oven.
After you are done you can discard it and still have 99 left in the pack.
That's about the only thing I can think of that's cheap, withstands high temperature and that you can bend and scrape to your hearts content to
collect as much as you can.
|
|
PHILOU Zrealone
International Hazard
Posts: 2893
Registered: 20-5-2002
Location: Brussel
Member Is Offline
Mood: Bis-diazo-dinitro-hydroquinonic
|
|
Fluidized bed drying should avoid the sticking of salts.
PH Z (PHILOU Zrealone)
"Physic is all what never works; Chemistry is all what stinks and explodes!"-"Life that deadly disease, sexually transmitted."(W.Allen)
|
|
JJay
International Hazard
Posts: 3440
Registered: 15-10-2015
Member Is Offline
|
|
I've done this with copper (ii) chloride by just stirring occasionally. The problem I ran into was with severe bumping of the solution as the hydrated
crystals formed, which threw corrosive copper (ii) chloride solution all over the inside of the oven. Definitely don't use an important oven for this.
|
|
alking
Hazard to Others
Posts: 252
Registered: 11-3-2016
Member Is Offline
Mood: No Mood
|
|
What is this?
|
|
j_sum1
Administrator
Posts: 6324
Registered: 4-10-2014
Location: At home
Member Is Offline
Mood: Most of the ducks are in a row
|
|
Think air hockey table.
|
|
DrP
National Hazard
Posts: 625
Registered: 28-9-2005
Member Is Offline
Mood: exothermic
|
|
Why not just a standard filter paper and Buchner? I never liked using the fritted glass filters, especially for fine stuff. a)I could never get all my
product off of the glass. b)I was never confident it was 100% clean.
So - collect on a filter paper and dry it on the paper on a petri dish in a vacuum oven. ftw.
\"It\'s a man\'s obligation to stick his boneration in a women\'s separation; this sort of penetration will increase the population of the younger
generation\" - Eric Cartman
|
|