Glu0n
Harmless
Posts: 3
Registered: 20-12-2016
Member Is Offline
Mood: No Mood
|
|
Formic acid prep?
My head hurts like hell right now. Spent the last 3 days of my free time trying to prepare some formic acid, i only need 1ml ffs. I don't want to
spend $40 and wait 4 weeks for shipping.
Oxalic acid + Glycerol doesn't work. I don't know why i expected it to work this time when it didn't the last 3 times i tried. The distillate is maybe
1% formic acid, useless. All that comes over is water, until the allyl alcohol.
Permanganate and dichromate oxidise right to CO2.
Chloroform reacts with NaOH in methanol, seems like sodium formate is formed but can't isolate it from NaCl. Adding sulphuric acid is the same
problem, no formic acid distils over and if it does its contaminated with HCl.
Paraformaldehyde with NaOH seems to give sodium formate. I added some 40% H2SO4 and there was a huge evolution of gas. I don't know if the headache is
frustration or monoxide.
No stores sell any product with formic acid. What do i do next? Sodium bicarbonate and sodium borohydride? I don't know. Im sick of it.
|
|
|
Aqua-regia
Hazard to Others
Posts: 126
Registered: 18-12-2006
Member Is Offline
Mood: No Mood
|
|
Oxalic acid + Glycerol work well. Heat the mixture very slow and adjust the right teperature very carefully. Obviusly you overeheated the mixture.
|
|
|
Tsjerk
International Hazard
Posts: 3032
Registered: 20-4-2005
Location: Netherlands
Member Is Offline
Mood: Mood
|
|
Electrolysis of formaldehyde?
|
|
|
Liamatpm
Harmless
Posts: 48
Registered: 7-12-2016
Location: Maine
Member Is Offline
Mood: Using the process of cellular respiration to stay (barely) alive
|
|
I would agree with Aqua-regia. But when the test does work don't spill it on your hand!
|
|
|
unionised
International Hazard
Posts: 5126
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
"Chloroform reacts with NaOH in methanol, seems like sodium formate is formed but can't isolate it from NaCl. Adding sulphuric acid is the same
problem, no formic acid distils over and if it does its contaminated with HCl."
Calcium formate is a lot less soluble than calcium chloride.
|
|
|
Glu0n
Harmless
Posts: 3
Registered: 20-12-2016
Member Is Offline
Mood: No Mood
|
|
Quote: Originally posted by Aqua-regia  |
Oxalic acid + Glycerol work well. Heat the mixture very slow and adjust the right teperature very carefully. Obviusly you overeheated the mixture.
|
Had it in a boiling water bath for 4 hours, just water came over when i moved to mantle. I thought maybe i decomposed the formic acid keeping it hot
for so long so next time i just distilled at a drip every second pace for an hour or whatever it took, still nothing significant. Watched the
temperature in the still head and it was about 110-120.
Haha, after a frustrating waste of time playing with copper sulphate trying to dry what i thought was formic acid i stuck my finger in it and had a
taste. Definitely extremely dilute.
Good idea problem is calcium hydroxide isn't soluble in alcohol. I'll see though. The reaction with sodium hydroxide was easy in fact if i had more
then 5ml it would have overrun my condenser. Very exothermic.
|
|
|
aga
Forum Drunkard
Posts: 7030
Registered: 25-3-2014
Member Is Offline
|
|
I recall blogfast25 telling me that it can easily be had from sodium formate, so i bought some, as it was cheap.
Never had a need for formic acid, so still have not looked up what he actually meant.
Best go do that now ...
Edit:-
Didn't take long : http://www.sciencemadness.org/smwiki/index.php/Formic_acid
Add sodium formate to <i>dilute</i> sulphuric acid and distill the formic acid off at 100-101 C. Conc H2SO4 just
rips it apart to CO and H2O.
Alternatively, distill a pot of live ants like the discoverer, John Ray did in 1671. Ew. That's Ant-murder that is.
[Edited on 21-12-2016 by aga]
|
|
|
Glu0n
Harmless
Posts: 3
Registered: 20-12-2016
Member Is Offline
Mood: No Mood
|
|
I did the oxalic/glycerol methol again, maintained 120c for 3 hours. Only had 20g oxalic acid left though. Ended up being too dilute, about 15ml of
20%. I reacted with ammonia, evaporated, then added 10ml 40% sulphuric acid and distilled. This was more like 50% Then dried with copper sulphate and
distilled it out under vacuum. Final yield 1.7g lol. 8 hours work. I just ordered some off ebay from an awesome cheap Ukrainian seller so i will never
have to do this again.
Ya Aga, distilling ants would disturb me. People pour molten aluminium down ant hills to make a casting too.
|
|
|
unionised
International Hazard
Posts: 5126
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
React chloroform with NaOH to get salt and sodium formate.
(I suspect that eaction works better if you add alcohol to get them to mix- if so, boil the mixture to get rid of alcohol)
Neutralise with HCl.
Add CaCl2 soln and evaporate down until much/ most of the Ca formate precipitates.
Filter it offf
wash it with alcohol (to get rid of the last of the CaCl2)
Treat Ca(HCOO)2 with dil H2SO4 to get dilute HCOOH
Filter off CaSO4 (or don't- it's a pig to filter, but if you don't it will clog up the distillation flask)
Distil the dilute acid to remove water + get the azeotrope.
Dry + redistil.
|
|
|
Metacelsus
International Hazard
Posts: 2539
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline
Mood: Double, double, toil and trouble
|
|
Chloroform and alcoholic NaOH (or KOH) is a notoriously reactive mixture (it forms dichlorocarbene), so be careful.
| Quote: |
A chloroform-methanol mixture was put into a drum contaminated with sodium hydroxide. A vigorous reaction set in, and the drum exploded. Chloroform
normally reacts slowly with sodium hydroxide owing to the insolubility of the latter. The presence of methanol (or other solubilizer) increases the
rate of reaction by increasing the degree of contact between chloroform and alkali.
|
(https://webwiser.nlm.nih.gov/)
[Edited on 12-21-2016 by Metacelsus]
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
