Khemi
Harmless
Posts: 13
Registered: 20-9-2016
Member Is Offline
Mood: Hex n’ sex ftw
|
|
n n-diethylmethylamine synthesis
Hi,
I am trying to learn more about this tertiary amine and its preparation. I did a good deal of searching in hopes of finding the synthesis for it. Can
it be synthesized from diethylamine or triethylamine?
Thanks
|
|
|
Aqua-regia
Hazard to Others
Posts: 126
Registered: 18-12-2006
Member Is Offline
Mood: No Mood
|
|
Yes you can do this, if you have autoclave. Diethylamine react with formaldehyde on 120 C degrees under 1,4-1,5 MPa pressure with good yield (95%)
Reactionstime min 8 hours. Molar ratio: 2: 3,2
diethylamine 98% : formaldehyde 30%. but be careful, this is precursor of LSD, unless you want appoitment with DEA
Reference: Celanese Chemicals Europe GmbH Patent: EP1466887
|
|
|
Nicodem
|
Thread Moved
9-12-2016 at 03:01 |
Khemi
Harmless
Posts: 13
Registered: 20-9-2016
Member Is Offline
Mood: Hex n’ sex ftw
|
|
Thanks Aqua! Not sure how I missed that ref. I spent a good 3-4 hours looking this info up.
I certainly don't want any appointments with anyone! I'm usually naked 99% of the day as I am allergic to clothing and if someone came to my door.. I
would have to, at the very least, put on some socks. But yea, I read somewhere people used diethylamine to do bad things like make stupid LSD. Why
people inject drugs like LSD is beyond my comprehension. Good thing I don't need to source anything. 
I take it a pressure cooker can not be used due to the inability to identify the internal temp. This is a pretty expensive endeavor for making a
youtube video. A digital autoclave is going to hurt the pocketbook. =/
Thanks again Aqua
|
|
|
Tsjerk
International Hazard
Posts: 3032
Registered: 20-4-2005
Location: Netherlands
Member Is Offline
Mood: Mood
|
|
If you have water inside your pressure cooker you can determine the temperature by measuring the pressure. Standard "fast cookers" go up to 120
degrees by default.
|
|
|
CuReUS
National Hazard
Posts: 928
Registered: 9-9-2014
Member Is Offline
Mood: No Mood
|
|
No need to jump to the nuclear option just yet.,Why not try an eschweiler-clarke
on diethylamine first ?
diethylamine can be obtained from weedicides.
|
|
|
Khemi
Harmless
Posts: 13
Registered: 20-9-2016
Member Is Offline
Mood: Hex n’ sex ftw
|
|
diethylamine is in stock..
Interesting Tsjerk! But now that CuRe mentions Eschweiler-Clarke with formaldehyde and formic acid.. That seems less of a hassle. Although the thought
of having a autoclave around was starting to become enticing but who wants to spend more cash. This hobby is too damn expensive as is! 
Im curious about yields on the E-C, but not worried about them as I just need a ml or so for analysis and plenty of DEA to go around.
[Edited on 9-12-2016 by Khemi]
|
|
|
Aqua-regia
Hazard to Others
Posts: 126
Registered: 18-12-2006
Member Is Offline
Mood: No Mood
|
|
Bad news, but eschweiler on DEA needs superatmospheric pressure too. It is no difference than using instead formaldehyde solution paraformaldehyde
or formic acid.
|
|
|
Aqua-regia
Hazard to Others
Posts: 126
Registered: 18-12-2006
Member Is Offline
Mood: No Mood
|
|
"diethylamine can be obtained from weedicides"
What do you mean? 2,4D diethylamine salt basicified with NaOH and reflux?
[Edited on 9-12-2016 by Aqua-regia]
|
|
|
CuReUS
National Hazard
Posts: 928
Registered: 9-9-2014
Member Is Offline
Mood: No Mood
|
|
reference ?
Quote: Originally posted by Aqua-regia  | "diethylamine can be obtained from weedicides"
What do you mean? 2,4D diethylamine salt basicified with NaOH and reflux? |
yes
|
|
|
careysub
International Hazard
Posts: 1339
Registered: 4-8-2014
Location: Coastal Sage Scrub Biome
Member Is Offline
Mood: Lowest quantum state
|
|
DEET (N,N-Diethyl-meta-toluamide) is generally a more accessible material to work with than 2,4-D. Google hydrolysis methods on the SM site.
All of the 2,4-D products I consulted use dimethylamine to form the amide of 2,4-dichlorophenoxyacetic acid, not diethylamine.
About that which we cannot speak, we must remain silent.
-Wittgenstein
Some things can never be spoken
Some things cannot be pronounced
That word does not exist in any language
It will never be uttered by a human mouth
- The Talking Heads
|
|
|
Aqua-regia
Hazard to Others
Posts: 126
Registered: 18-12-2006
Member Is Offline
Mood: No Mood
|
|
reference ?
SYNTHETIC COMMUNICATIONS, 32(3), 457–465 (2002)
[Edited on 10-12-2016 by Aqua-regia]
|
|
|
Aqua-regia
Hazard to Others
Posts: 126
Registered: 18-12-2006
Member Is Offline
Mood: No Mood
|
|
"All of the 2,4-D products I consulted use dimethylamine to form the amide of 2,4-dichlorophenoxyacetic acid, not diethylamine"
Yes you have right, i do not checked this before i wrote. But this product exist:
http://www.pesticideinfo.org/Detail_Chemical.jsp?Rec_Id=PC35...
|
|
|
CuReUS
National Hazard
Posts: 928
Registered: 9-9-2014
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by careysub | | DEET (N,N-Diethyl-meta-toluamide) is generally a more accessible material to work with than 2,4-D. Google hydrolysis methods on the SM site.
|
that thread ran for 11 pages and was inconclusive.Hydrolysis of DEET is not as easy as it looks.http://www.sciencemadness.org/talk/viewthread.php?tid=11081&...
this article does not mention diethylamine anywhere
|
|
|
Aqua-regia
Hazard to Others
Posts: 126
Registered: 18-12-2006
Member Is Offline
Mood: No Mood
|
|
This is general procedure for the methylation of primary or secondary amines solventfree. For sure it is exist other ways too, like classical eschw.
with formic acid, but a do not deeply "investigated" away. Maybe i was wrong with my opinion about superathmosferic circumstances. I never cooked
something with Eschweiler methode, just tought if reagent are low boiling point, for good yields needs elevated temerature.
|
|
|
careysub
International Hazard
Posts: 1339
Registered: 4-8-2014
Location: Coastal Sage Scrub Biome
Member Is Offline
Mood: Lowest quantum state
|
|
Yes, indeed - that long running thread was remarkably free of any reports on actual success, and I raised that point on another thread more recently:
http://www.sciencemadness.org/talk/viewthread.php?tid=24131&...
And as a result there was an actual report of a successful procedure by nlegaux :
"I was able to successfully prepare freebase diethylamine with the following procedure. I refluxed 50ml DEET with 32ml 8M HCl(aq) for 1.5h. Following
this, I added 15g NaOH (which was first dissolved in 20ml water) and distilled off the resulting diethylamine with a 75% yield. It may be easier to
purify the freebase in this way and form the salt afterwards than attempt to purify the salt from the m-toluic acid produced."
Also this possibly useful observation:
"I've seen a couple reports claiming success with DEET but not on SM. What successful reports have in common is that they're done in small batches
using alkaline hydrolysis with excess NaOH or KOH and the NHEt2 is distilled right out of the rxn mixture."
Also it seems the all three ethylamines (mono, di, tri) are available with entirely OTC reagents, but some work using diethyl oxalate. See my post on
this page:
http://www.sciencemadness.org/talk/viewthread.php?tid=11081&...
[Edited on 11-12-2016 by careysub]
About that which we cannot speak, we must remain silent.
-Wittgenstein
Some things can never be spoken
Some things cannot be pronounced
That word does not exist in any language
It will never be uttered by a human mouth
- The Talking Heads
|
|
|
Khemi
Harmless
Posts: 13
Registered: 20-9-2016
Member Is Offline
Mood: Hex n’ sex ftw
|
|
Eschweiler-Clarke
So I am trying to grasp this the best I can. I have excellent lab technique but am learning about the actual molecular structures of a molecule and
how a amateur chemist would go about looking at a structure and determine what reaction would best be needed to change that molecule to arrive at the
desired compound. If that wasn't clear already lol.
So I did some reading and I am unsure if I am comprehending what I am reading.
Per. https://www.erowid.org/archive/rhodium/pdf/eschweiler-clarke...
"A clean methylation of secondary amines in yields above 90% was achieved with an equimolar ratio of secondary amine and paraform- aldehyde along with
the fivefold molar amount of oxalic acid dihydrate (5a) within one hour."
So essentially we have:
Diethylamine with a mol-mass of 73.14g in a freebase solution.
Paraformaldehyde with a mol-mass of 30.03g as a monomer.
Oxalic Acid dihydrate with a mol-mass of 126.07g
So that would mean a 1:1:5 mol of reactants is needed which is 73.14g of diethylamine added to 30.03g of paraformaldehyde along side 630.35g of oxalic
acid which is then heated to 100-120c for 1 hour to yield 87.16g (1 mol) of n,n diethylmethylamine if yields were to be quantitative, which according
to the literature will not be the case as 90% yields were returned.
Am I correct thus far? If so, then I am confused as to the following passage.
"Paraformaldehyde can be depolymerized to formaldehyde gas by dry heating[1] and to form a formaldehyde solution by water in the presence of a base or
heat. The very pure formaldehyde solutions obtained in this way are used as a fixative for microscopy and histology."
If diethylamine is a weak base and a large amount of oxalic acid is added alongside it, wouldn't the reaction contents turn acidic now allowing
paraformaldehyde to decompose to give formalin is situ?
Would the final n,n diethymethylamine be in freebase form, or as a salt?
Im sure this isn't the case as it wouldn't be in the literature. I am just hoping someone could explain what I am misunderstanding.
Thanks for your patience. I appreciate all the input you all have contributed thus far. 
[Edited on 11-12-2016 by Khemi]
|
|
|
CuReUS
National Hazard
Posts: 928
Registered: 9-9-2014
Member Is Offline
Mood: No Mood
|
|
| Quote: Originally posted by Khemi | | If diethylamine is a weak base and a large amount of oxalic acid is added alongside it, wouldn't the reaction contents turn acidic now allowing
paraformaldehyde to decompose to give formalin is situ? |
| Quote: | | "Paraformaldehyde can be depolymerized to form a formaldehyde solution by water in the presence of a base or heat
|
| Quote: | | Would the final n,n diethymethylamine be in freebase form, or as a salt? |
It will be in the form of a salt,you have to freebase it using CaO as mentioned in the erowid paper (pg 7/10 in pdf under "General Procedure for the
Methylation of Primary or Secondary Amines" )
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
