Bobmaccian
Harmless
Posts: 13
Registered: 20-10-2016
Member Is Offline
Mood: No Mood
|
|
Theoretical chemistry how to obtain sulfuric acid from raw natural sources
|
|
|
Maroboduus
Hazard to Others
Posts: 257
Registered: 14-9-2016
Location: 26 Ancho Street
Member Is Offline
Mood: vacant
|
|
1: Dig up some Sulphur
2: Dig up, or extract from natural sources, some nitrate salts
3: Mix them (nitrates in excess to oxidize the SO2 produced),and burn in closed container with water to absorb the fumes
4:????
5: PROFIT!
|
|
|
Bobmaccian
Harmless
Posts: 13
Registered: 20-10-2016
Member Is Offline
Mood: No Mood
|
|
I was considering using gypsum caso4 separating it from the calcium by heating it until it releases the so4 gas and combining the gas with hydrogen
gas electrically to form sulfuric acid. Would it work and if not why not would it need some type of catalyst or reagent to make it work that would be
normally or naturally obtainable
|
|
|
j_sum1
Administrator
Posts: 6324
Registered: 4-10-2014
Location: At home
Member Is Offline
Mood: Most of the ducks are in a row
|
|
Quote: Originally posted by Bobmaccian  | | I was considering using gypsum caso4 separating it from the calcium by heating it until it releases the so4 gas and combining the gas with hydrogen
gas electrically to form sulfuric acid. Would it work and if not why not would it need some type of catalyst or reagent to make it work that would be
normally or naturally obtainable |
There is no SO4 gas.
It is a good question but I recommend you doing some elementary research so that you fully appreciate the answers given. There is more than one
approach. None of them are super trivial.
|
|
|
macckone
Dispenser of practical lab wisdom
Posts: 2168
Registered: 1-3-2013
Location: Over a mile high
Member Is Offline
Mood: Electrical
|
|
At the temperature required SO3 breaks down. In fact a carbon source is normally added which facilitates this to increase sulfur dioxide
production. This is a very high temp reaction.
|
|
|
Texium
|
Thread Moved
20-10-2016 at 21:37 |
phlogiston
International Hazard
Posts: 1379
Registered: 26-4-2008
Location: Neon Thorium Erbium Lanthanum Neodymium Sulphur
Member Is Offline
Mood: pyrophoric
|
|
There are natural (volcanic) lakes that consist of surprisingly concentrated sulfuric acid.
You may also want to consider pyrite as a starting point rather than gypsum.
-----
"If a rocket goes up, who cares where it comes down, that's not my concern said Wernher von Braun" - Tom Lehrer |
|
|
Dwarvensilver
Hazard to Self
Posts: 52
Registered: 8-6-2016
Member Is Offline
Mood: Constantly Chemically Amazed
|
|
| Quote: Originally posted by phlogiston | There are natural (volcanic) lakes that consist of surprisingly concentrated sulfuric acid.
You may also want to consider pyrite as a starting point rather than gypsum. |
Yup, in a process at work we pressure oxidize sulfide concentrates.
If there is a lot of pyrite it makes sulfuric acid which we then have to neutralize the excess with limestone flour. This of course makes gypsum and
that becomes a pain in the ass.
[img] [/img]
Of course this pic is from sitting for a couple months with no operation to get those crystals on the heating coils
[Edited on 2016-10-22 by Dwarvensilver]
There is nothing more useless than doing well that which need not be done at all.
|
|
|
Bobmaccian
Harmless
Posts: 13
Registered: 20-10-2016
Member Is Offline
Mood: No Mood
|
|
The reason i thoght of this is because in apocalyptic times there is a main source of. Sulfur bearing product wallboard from collapsed apts and homes
|
|
|
Bobmaccian
Harmless
Posts: 13
Registered: 20-10-2016
Member Is Offline
Mood: No Mood
|
|
But your right there may not be enough sulfur to harvest out of this process
|
|
|
ficolas
Hazard to Others
Posts: 146
Registered: 14-5-2016
Member Is Offline
Mood: No Mood
|
|
In an apocaliptic time, there is a nice source of sulphur: gardening stores
|
|
|
Bobmaccian
Harmless
Posts: 13
Registered: 20-10-2016
Member Is Offline
Mood: No Mood
|
|
I probably would hunt for extinct volcanoes near my home in southern new mexico
|
|
|
Bobmaccian
Harmless
Posts: 13
Registered: 20-10-2016
Member Is Offline
Mood: No Mood
|
|
If the gardening stores are not cleaned out allready whi h usually happens within the first day to a week of marauders looking for gunpowder
ingredients
|
|
|
Bobmaccian
Harmless
Posts: 13
Registered: 20-10-2016
Member Is Offline
Mood: No Mood
|
|
Not all preppers are total idiots or people who live off the grid
|
|
|
wg48
National Hazard
Posts: 821
Registered: 21-11-2015
Member Is Offline
Mood: No Mood
|
|
Dilute acid (20%) seems plausible but I would be very surprised if it was anywhere near concentrated acid (98%).
Do you have a reference for it?
|
|
|
crystal grower
Hazard to Others
Posts: 474
Registered: 3-1-2016
Location: Os Petrosum
Member Is Offline
Mood: Puzzled
|
|
Sorry Bob, but all those things about preppers just make me laugh...
If an apocalypse occurs, for what on the earth would you need sulfuric acid  ?.
|
|
|
Bobmaccian
Harmless
Posts: 13
Registered: 20-10-2016
Member Is Offline
Mood: No Mood
|
|
Homemade battery's smokeless powder for cartridge cases chemicals used to manufacture smokeless powder like diethel ether, nitric acid regular
blackpowder would ruin automatic type fire arms so nitrocellulose would need to be made and stabilized with diethel ether thats made from sulfuric
acid
|
|
|
Bobmaccian
Harmless
Posts: 13
Registered: 20-10-2016
Member Is Offline
Mood: No Mood
|
|
stabilized nitrocellulose has a name its technical name is known as Poudre b and theres another cousin to it as well ammonpulver invented by Hiram
maxim in 1888
|
|
|
Bobmaccian
Harmless
Posts: 13
Registered: 20-10-2016
Member Is Offline
Mood: No Mood
|
|
both of which require sulfuric acid to manufacture
|
|
|
Bobmaccian
Harmless
Posts: 13
Registered: 20-10-2016
Member Is Offline
Mood: No Mood
|
|
yes there are battery acid from cars can also be obtained from auto supply stores if im not once again beaten to the punch
|
|
|
j_sum1
Administrator
Posts: 6324
Registered: 4-10-2014
Location: At home
Member Is Offline
Mood: Most of the ducks are in a row
|
|
IMO the simplest synth of sulfuric acid is electrolysis of copper sulfate (or another sulfate salt. You can make MnSO4 by bubbling SO2 from burning
sulfur through a slurry made from battery innards.)
You need a couple of volts power supply, a piece of lead for an anode, copper wire for cathode, a jam jar to hold it in and in my experience about 24h
per 50g batch of copper sulfate. Boil down until white fumes appear amd you have about 70% although you can concentrate further.
I have had perfectly clear batches before but usually there is a faint green from residual Cu after boiling down.
[edit]
BTW what's with the long string of sequential posts? There is an edit button should you need it.
[Edited on 22-10-2016 by j_sum1]
|
|
|
Bobmaccian
Harmless
Posts: 13
Registered: 20-10-2016
Member Is Offline
Mood: No Mood
|
|
i think my best bet would ask this question to a geologist on where to look for natural sulfur deposits are and what to look for
|
|
|
j_sum1
Administrator
Posts: 6324
Registered: 4-10-2014
Location: At home
Member Is Offline
Mood: Most of the ducks are in a row
|
|
OTC sulfur is not going away any time soon. There are vast stockpiles of the stuff from crude oil and gas refining. It has horticultural and
agricultural applications. And if you live in a geologically active area, look for the yellow stuff on the ground.
|
|
|
Maroboduus
Hazard to Others
Posts: 257
Registered: 14-9-2016
Location: 26 Ancho Street
Member Is Offline
Mood: vacant
|
|
| Quote: Originally posted by j_sum1 | IMO the simplest synth of sulfuric acid is electrolysis of copper sulfate (or another sulfate salt. You can make MnSO4 by bubbling SO2 from burning
sulfur through a slurry made from battery innards.)
You need a couple of volts power supply, a piece of lead for an anode, copper wire for cathode, a jam jar to hold it in and in my experience about 24h
per 50g batch of copper sulfate. Boil down until white fumes appear amd you have about 70% although you can concentrate further.
I have had perfectly clear batches before but usually there is a faint green from residual Cu after boiling down.
[edit]
BTW what's with the long string of sequential posts? There is an edit button should you need it.
[Edited on 22-10-2016 by j_sum1] |
Cool. Do you think that'd work with ammonium or magnesium sulphate if you used a divided cell with a salt bridge? I assume these wouldn't work in a
single cell. I can buy H2SO4, but it's nice to have contingency plans.
(not for the apocalypse, just for changes in commercial availability)
EDIT: Bobmccain, don't forget pyrites. They're easy to find out west as well.
[Edited on 22-10-2016 by Maroboduus]
|
|
|
j_sum1
Administrator
Posts: 6324
Registered: 4-10-2014
Location: At home
Member Is Offline
Mood: Most of the ducks are in a row
|
|
The question is really one of what happens at the cathode. Cu deposits in nice dendrites. Mn forms a pile of powdered MnO2 (which has its own uses.)
Zinc would plate out if you had access to zinc sulfate. Mg you might be able to work with in a divided cell but I have no experience. I dunno about
ammonium.
I once toyed with the idea of electrolysing MnSO4 and then recycling the MnO2 produced. On paper it seemed like a tidy idea. I could begin with
battery paste MnO2 (purified of course) and bubble SO2 from burning sulfur to create the sulfate. Electrolyse. Rinse lather repeat. That way I
would effectively have a route from elemental sulfur from the garden supply shop all the way to sulfuric acid using OTC items only and perpetually
reusing the manganese dioxide as a kind of process catalyst.
The reality is that battery gunk is messy at the best of times and more so before the carbon and iron is gotten rid of. Burning sulfur has its own
messiness issues. (I followed Nurdrage's procedure but cleaning all the glass afterwards is a pain and the tubing does not last long.) The reaction
between MnO2 and SO2 is not particularly efficient and other products are possible. And by the time a slow electrolysis was completed and a long
boil-down process was done, it just did not seem like it would be worth the hassle. It was then that I started buying H2SO4.
Here are three threads that discuss some novel methods for making dilute H2SO4. I have tried the oxalic acid / MgSO4 method which appears to work.
But I did not analyse the product.
https://www.sciencemadness.org/whisper/viewthread.php?tid=65...
https://www.sciencemadness.org/whisper/viewthread.php?tid=63...
https://www.sciencemadness.org/whisper/viewthread.php?tid=62...
There are plenty more with a short search (These are just some I participated in- I was looking for something I said.) And let's not forget the lead
chamber process about which there is a long thread. (Attractive concept but problematic from an engineering standpoint and the normal headaches of
high temperature closed systems.)
|
|
|
Maroboduus
Hazard to Others
Posts: 257
Registered: 14-9-2016
Location: 26 Ancho Street
Member Is Offline
Mood: vacant
|
|
Thanks, J_sum1.
Those threads really covers a lot of great routes to sulphuric acid. Even though I've got easy access to H2SO4, I'm going to try a few of those
methods. They just sound cool to try out and easy to experiment with.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
:
