Pumukli
National Hazard
Posts: 705
Registered: 2-3-2014
Location: EU
Member Is Online
Mood: No Mood
|
|
Fridge pump for refrigeration
Yes, it is fridge pump question, but it deals with the ability to refrigerate rather than making vacuum, so I think it is legit here. :-)
One day I was pondering what would happen if I got a fridge pump, put a copper coil on one side (compressor side) and submerged this coil in basically
a bucket of cold water. Then another similar coil would be put on the expansion side and submerged this (cold) coil in some sort of heat transfer
liquid (longer chain alcohol maybe) in an insulated bucket (Dewar-bucket). Then filled the pump with the appropriate refrigerant and turned it on.
(Basically I was thinking about making an "active" or "continuous" cooler to use instead of salt-ice or other exotic cooling mixtures.)
Questions: 1, could it work? 2, if yes, then what would be the lowest achievable temperature on the cold side (approximately)?
|
|
|
S.C. Wack
bibliomaster
Posts: 2419
Registered: 7-5-2004
Location: Cornworld, Central USA
Member Is Offline
Mood: Enhanced
|
|
You'd need a restriction/meter between the hot high pressure and cold low pressure sides. The temperature is the boiling point of the refrigerant, at
the pressure found in the evaporator.
The restriction can be and often is as simple as copper capillary tubing.
[Edited on 13-3-2016 by S.C. Wack]
|
|
|
Pumukli
National Hazard
Posts: 705
Registered: 2-3-2014
Location: EU
Member Is Online
Mood: No Mood
|
|
Thanks S.C.Wack!
So it seems doable. Now I have to look up refrigerant temp/pressure/boiling point data.
|
|
|
Texium
|
Thread Moved
22-11-2023 at 20:09 |
![[*]](images/xpblue/default_icon.gif){kind=icon}
