Sciencemadness Discussion Board
Not logged in [Login ]
Go To Bottom

Printable Version  
Author: Subject: Hydrochloric acid from cyanuric acid
Korialstrasz69
Harmless
*




Posts: 34
Registered: 23-9-2015
Member Is Offline

Mood: No Mood

[*] posted on 10-10-2015 at 12:12
Hydrochloric acid from cyanuric acid


Have anyone ever tried the chlorination of cyanuric acid ?I am willing to make it in order to synthesis TCCA or HCl,so have anyone ever tried it before ?i already made some research before you ask i just want to know how it goes from someone who tried it to know things like when to stop and how much chlorine is needed and does electrolytic Cl2 from NaCl work ?
View user's profile View All Posts By User
m1tanker78
National Hazard
****




Posts: 685
Registered: 5-1-2011
Member Is Offline

Mood: No Mood

[*] posted on 10-10-2015 at 12:36


Yes, it can be made by electrolyzing NaCl solution. I do this on a daily basis. The swimming pool filter pump kicks on. Then the chlorinator kicks on and CYA is chlorinated. To what degree I don't know.

It works quite well for the swimming pool so it must be do-able in the lab. The fanciest item you might require would be a titanium plate/sheet for the anode.




Chemical CURIOSITY KILLED THE CATalyst.
View user's profile View All Posts By User
UC235
National Hazard
****




Posts: 565
Registered: 28-12-2014
Member Is Offline

Mood: No Mood

[*] posted on 10-10-2015 at 17:23


TCCA is made by treating a solution or slurry of trisodium cyanurate (saturation is ~0.5M at 20C) with chlorine gas in excess. The product precipitates (solubility is roughly 0.05M so yield should be about 90%. Using a slurry of trisodium cyanurate will improve this), is collected and washed to remove residual NaCl.

The product will not work in nonbasic conditions, as TCCA and HCl react readily to form chlorine gas and represent one of the easiest and cleanest available chlorine gas generating mixtures using cheap and readily available TCCA pool tablets.

[Edited on 11-10-2015 by UC235]
View user's profile View All Posts By User
violet sin
International Hazard
*****




Posts: 1480
Registered: 2-9-2012
Location: Daydreaming of uraninite...
Member Is Offline

Mood: Good

[*] posted on 10-10-2015 at 21:26


the papers I read, said it was two step... see if I can dig that one up...

3,757,018
PROCESS FOR CHLORINATING CYANURIC ACID
Attachment: chlorinating cyanuric acid.pdf (594kB)
This file has been downloaded 282 times

(a) High chlorinated cyanuric acid yields.
(b) Low chlorine and aqueous alkali losses.
(c) Essentially no by-product formation, e.g. lachryma
tory by-products.
(d) High reaction rates.
(e) Product selectivity, either essentially pure di- or tri
chloroisocyanuric acid or preselected mixtures thereof
can be produced.

pool owner, so I have looked into it. TCCA not always cheap, but quite effective. turns out CYA isn't cheap either :(

edited, because of faulty memory. thought one step was harder than the other, but it was just two separate steps..

[Edited on 11-10-2015 by violet sin]
View user's profile View All Posts By User
Korialstrasz69
Harmless
*




Posts: 34
Registered: 23-9-2015
Member Is Offline

Mood: No Mood

[*] posted on 11-10-2015 at 04:06


Thanks everyone :)
View user's profile View All Posts By User

  Go To Top