CaptainPike
Hazard to Self
Posts: 68
Registered: 21-12-2012
Member Is Offline
Mood: No Mood
|
|
Drying heating oil
Okay, here we enjoy a practical application of chemistry.
I want to remove the water, if any, from my household, #2 fuel oil tank, roughly 275 gallons capacity. The fuel level is getting low so I was
thinking this would be a great time to throw some dry methanol in there. Why wouldn't that work?
|
|
|
zed
International Hazard
Posts: 2284
Registered: 6-9-2008
Location: Great State of Jefferson, City of Portland
Member Is Offline
Mood: Semi-repentant Sith Lord
|
|
Water accumulation in Diesel fuel is a widespread problem. What do the guys that drive the Big Rigs do?
These guys have some tips, which naturally involve you buying their products.
http://inspectapedia.com/oiltanks/Oil_Tank_Water_Removal.php
Me, I'm cheap. I might pump it all out. Flush the tank out, filter the old fuel, and start fresh. Methanol might work for water, but not for other
kinds of crud.
[Edited on 25-9-2015 by zed]
|
|
|
Nicodem
|
Thread Moved
25-9-2015 at 15:26 |
lavenatti
Harmless
Posts: 17
Registered: 19-12-2006
Member Is Offline
Mood: No Mood
|
|
Almost all the water will be under the diesel. I've always just siphoned it off the bottom.
|
|
|
Praxichys
International Hazard
Posts: 1063
Registered: 31-7-2013
Location: Detroit, Michigan, USA
Member Is Offline
Mood: Coprecipitated
|
|
As long as you system can tolerate flammable vapors (like if you were to use methanol) you could throw some E-85 in there. The 85% ethanol should soak
up the water, and it would probably be cheaper than the methanol.
Of course, siphoning or draining the water from the bottom is the preferable solution.
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
