bigtrevs98
Harmless
Posts: 35
Registered: 14-4-2015
Member Is Offline
Mood: No Mood
|
|
Chloroform and HCl
So one day I was kinda curious. I know chloroform is a solvent so I was wondering if chloroform could absorb the HClast from my works toilet cleaner
roughly 10% the chloroform over time started turning blue and there was a layer of whitish fog over the chloroform under a dark blue haze. On top of
the haze is where it looks like the chloroform absorbed something. What happened here? By the way this is like the 4th time I've doNE this to this
same batch of chloroform. It seems to KEEP absorbing.
|
|
Texium
Administrator
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 4552
Registered: 11-1-2014
Location: Salt Lake City
Member Is Offline
Mood: PhD candidate!
|
|
Assuming that your toilet cleaner was blue to begin with, the blue dye is likely moving into the chloroform phase that it is probably more soluble in,
while the HCl and other things that are more water soluble are staying in the aqueous layer. This doesn't seem like a good way to extract HCl at all,
but if you're just curious about what's happening, how about posting a list of all of the ingredients in the toilet bowl cleaner, which you can find
on the MSDS for it? Otherwise, it's impossible to know what's going on.
|
|
bigtrevs98
Harmless
Posts: 35
Registered: 14-4-2015
Member Is Offline
Mood: No Mood
|
|
Yes mainly just curious just got a batch of chloroform sitting around and started doing stuff with it...
would you be able to tell me what would haopen if I was to shoot chloroform with a syringe down into 3% hydrogen peroxide. Also 5% ammonia I think it
is. Like I said I'm just curious and I don't wanna do something that will have a violent reaction or anything because I know mixing acetone with h2o2
makes tatp. But chloroform isn't straught acetone tho. But idk. That's why I'm asking. Any help would be apprecoated (btw I'm waiting to get into collage as we speak so I'm just very curious)
Edit: and the cleaner msds only shows 9.5% HCL but that's it.
[Edited on 30-6-2015 by bigtrevs98]
|
|
macckone
Dispenser of practical lab wisdom
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 2168
Registered: 1-3-2013
Location: Over a mile high
Member Is Offline
Mood: Electrical
|
|
In science you should have some idea of what should happen
before performing a reaction. This idea is called a hypothesis.
If you hypothesis is correct then the reaction proceeds as planned.
If your hypothesis is incorrect then you may have other problems.
Like explosions. Go on youtube and watch what others are doing.
Get a chemistry text book or two and start reading.
Some are freely available on the internet.
Also look around the site for good starting points for beginners.
Chloroform can produce nasty byproducts if used incorrectly.
Phosgene being the worst one. Look it up if you don't know
what it is. Randomly mixing chemicals is unlikely to end well.
|
|
annaandherdad
Hazard to Others
![*](images/xpblue/star.gif) ![*](images/xpblue/star.gif)
Posts: 387
Registered: 17-9-2011
Member Is Offline
Mood: No Mood
|
|
Instead of buying toilet bowl cleaner in the grocery store it's a lot cheaper to buy a gallon of muriatic acid at the hardware store.
More exactly, since I have the muriatic acid anyway, I skip the toilet bowl cleaner. It works great.
Any other SF Bay chemists?
|
|