jar-jar
Harmless
Posts: 1
Registered: 1-2-2015
Member Is Offline
Mood: No Mood
|
|
amalgam?
First to say, I'm in a no way a chemist or something similar, I know only the very basic stuff from high school, and to be honest it never really
grabbed me back then, though I was good at it, probably because we never did experiments or idk, It wasn't until soon I became interested in chemistry
and started experimenting on my own with some basic stuff and searching for info on the web, and I found this forum one of the few of it's kind, and
now, I have some question I want to ask, because I can't find any practical explanation anywhere, so I registered here, I just hope this is not very
dummy question...
It's about mercury. I'm trying to reshape metal without heating it (mostly brass ,copper and cupro-nickel), and figured out the only way would be to
use amalgam (mercury or gallium). So I got a drop of mercury, and put it on a brass coin, but the mercury won't eat through it. I also tried mixing
the mercury with tiny copper wires I have burned to assure it is not insulated, but still no result at all, after 10 minutes or so, and I've been
watching videos on youtube how amalgam is made for seconds, and how it will eat through solid aluminum, so how to properly prepare the amalgam, and
then how to evaporate and collect the mercury? Also, any metal but iron will create amalgam, right? And is it the same with gallium?
[Edited on 1-2-2015 by jar-jar]
|
|
|
vmelkon
National Hazard
Posts: 669
Registered: 25-11-2011
Location: Canada
Member Is Offline
Mood: autoerotic asphyxiation
|
|
Reshape metal without heating it?
I guess you imagine that it will be a semi-solid.
I have limited experience with it. I dropped a piece of lead in mercury and a portion dissolves in it while the rest doesn't back in 1990. You get a
solid chunk of lead in a lead-mercury (liquid) alloy.
Make sure that your copper wire is clean. Scrape it with a knife or razor. For the brass coin, sand paper it.
Tip : Heating it will probably increase the rate of dissolution.
This is best done with a distillation kit made of iron. Some have done with standard lab glass. The thermal shock will be very high. Don't put water
in the condensor. Let it air cool.
Platinum, tungsten and tantalum. I don't know much about gallium.
Signature ==== Is this my youtube page? https://www.youtube.com/watch?v=tA5PYtul5aU
We must attach the electrodes of knowledge to the nipples of ignorance and give a few good jolts.
Yes my evolutionary friends. We are all homos here. |
|
|
Bert
Super Administrator
Posts: 2821
Registered: 12-3-2004
Member Is Offline
Mood: " I think we are all going to die. I think that love is an illusion. We are flawed, my darling".
|
|
No offense is meant by this, BUT:
If you evaporate Mercury from an amalgam, you will likely hurt yourself. I wouldn't distill Mercury, and I DID pay attention in HS chemistry.
There are other ways: Casting, sintering powdered metals-
If you own a microwave, you've got a heat source for a home made kiln/furnace that can smelt metals to cast Silver, Tin, Copper bronzes- Cupro Nickel,
I don't know.
https://m.youtube.com/watch?v=ZJvCuGmRWL8
Rapopart’s Rules for critical commentary:
1. Attempt to re-express your target’s position so clearly, vividly and fairly that your target says: “Thanks, I wish I’d thought of putting it
that way.”
2. List any points of agreement (especially if they are not matters of general or widespread agreement).
3. Mention anything you have learned from your target.
4. Only then are you permitted to say so much as a word of rebuttal or criticism.
Anatol Rapoport was a Russian-born American mathematical psychologist (1911-2007).
|
|
|
blogfast25
International Hazard
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
Nice vid, Bert. My experience with a fireclay/perlite charcoal fired furnace is that that ad hoc refractory doesn't last for very long. Cheap and easy
compared to 'real' refractories, though...
[Edited on 6-2-2015 by blogfast25]
|
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
