ktw_100
Harmless
Posts: 18
Registered: 21-4-2006
Member Is Offline
Mood: No Mood
|
|
Platinum electrodes from Radio Vaccum Tubes?
I was just wondering about getting platinum from the anodes/plates of some larger vacuum tubes from old radios. Seems to me that the grids in these
tubes might be good for making electrolysis anodes/cathodes. Also, what about other larger CRT's. Anybody ever tried this?
|
|
|
12AX7
Post Harlot
Posts: 4803
Registered: 8-3-2005
Location: oscillating
Member Is Offline
Mood: informative
|
|
Hmm, not familiar with Pt- they're usually nickel, copper or tungsten. Nickel is preferred for a lot because it outgasses easily in processing. Of
course, Ni isn't nearly expensive enough to tear up poor old tubes for.
Tim
|
|
|
The_Davster
A pnictogen
Posts: 2861
Registered: 18-11-2003
Member Is Offline
Mood: .
|
|
I read your post this morning, then this afternoon I had the opportunity to acquire dozens of vaccuum tubes for free . I don't really need them, but I am a sucker for free stuff....
Would have been nice if they did contain some precious metal...
|
|
|
a_bab
Hazard to Others
Posts: 458
Registered: 15-9-2002
Member Is Offline
Mood: Angry !!!!!111111...2?!
|
|
They usually contain a very small quantity of Ba, with the role of degasing. You can see it on the oposite side of the pins, as a blackish mirror
deposited on the glass.
|
|
|
12AX7
Post Harlot
Posts: 4803
Registered: 8-3-2005
Location: oscillating
Member Is Offline
Mood: informative
|
|
FWIW, the ring (or strip or whatever) that the barium is evaporated from, I've tried induction heating the getter inside sealed tubes and nothing
appears to come off, it's a good bet they evaporate everything at manufacture.
Tim
|
|
|
The_Davster
A pnictogen
Posts: 2861
Registered: 18-11-2003
Member Is Offline
Mood: .
|
|
Tim in your picture I am assuming it is of a tube being beld in a coil for induction heating?
To get slightly off topic, what is the basic design of your induction heater Tim? I have been thinking of making one with a NST, 15kv, 1uf cap, and a
spark gap.
|
|
|
12AX7
Post Harlot
Posts: 4803
Registered: 8-3-2005
Location: oscillating
Member Is Offline
Mood: informative
|
|
http://webpages.charter.net/dawill/tmoranwms/Elec_IndHeat6.h...
Also check out the other pages. You'll find that pic on the 2nd page or so.
In particular, I think that was a 12AT7 type.
Tim
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
