| Pages:
1
2 |
AvBaeyer
National Hazard
Posts: 651
Registered: 25-2-2014
Location: CA
Member Is Offline
Mood: No Mood
|
|
Interesting source of tin
It turns out that real tin foil is used for the capsule on wine bottles for some of the higher priced wines. Cheap wines (bottom shelf at Safeway) use
a plastic capsule. Aluminum foil or aluminum/plastic composites are also found on various wine bottles. I happen to like Italian wines and the tin
capsule is pretty common on some of the better Chiantis and related wines. I also recently found a tin capsule on one American wine from Oregon (King
Estates).
The insides of the aluminum capsules are shiny like you might expect while the insides of the tin capsules have a light yellowish-golden sheen. The
outsides of the tin capsules are generally covered with a thin coat of paint which is easily removed with acetone. Once the paint is gone, you are
left with a nice size piece of tin foil.
For those who like a good bottle of wine, there is also a hidden bonus for the lab.
AvB
|
|
|
blogfast25
International Hazard
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
And you have proof of this? If so, obtained how?
|
|
|
Nicodem
|
Thread Moved
6-12-2014 at 07:07 |
Bert
Super Administrator
Posts: 2821
Registered: 12-3-2004
Member Is Offline
Mood: " I think we are all going to die. I think that love is an illusion. We are flawed, my darling".
|
|
He is correct, bullet casters also seek to scavenge these Tin foil covers.
Tin has a distinct yellow/gold tint, if you've encountered it in pure form you'll recognize it.
Rapopart’s Rules for critical commentary:
1. Attempt to re-express your target’s position so clearly, vividly and fairly that your target says: “Thanks, I wish I’d thought of putting it
that way.”
2. List any points of agreement (especially if they are not matters of general or widespread agreement).
3. Mention anything you have learned from your target.
4. Only then are you permitted to say so much as a word of rebuttal or criticism.
Anatol Rapoport was a Russian-born American mathematical psychologist (1911-2007).
|
|
|
Chemosynthesis
International Hazard
Posts: 1071
Registered: 26-9-2013
Member Is Offline
Mood: No Mood
|
|
That is a fascinating source.
I know lead/tin automotive wheel weights used to be used for bullet casting, but they are largely zinc alloys now, which may be useful to some. This
is detrimental to cast bullets, and so they are discarded. Linotype was reported as a good source for lead/tin, but they aren't all that common from
what I understand.
|
|
|
careysub
International Hazard
Posts: 1339
Registered: 4-8-2014
Location: Coastal Sage Scrub Biome
Member Is Offline
Mood: Lowest quantum state
|
|
How much does a tin foil* capsule weigh?
Tin (99.9%) is $20/lb from Rotometals (a great company to do business with).
How many capsules does it take to make a pound? How much wine must you consume - inquiring minds want to know.
*One of the few occasions in my life where I have had cause to use this common expression accurately.
|
|
|
Bert
Super Administrator
Posts: 2821
Registered: 12-3-2004
Member Is Offline
Mood: " I think we are all going to die. I think that love is an illusion. We are flawed, my darling".
|
|
One of my hobbies...
http://castboolits.gunloads.com
The clip on type weights were mostly Lead, a few % Antimony and a small amount of Tin, .5-1.5% (just enough Tin to lower the alloy's surface tension
for good mould fill out). Usually also a VERY small amount of Arsenic to speed up hardening after they were cast. These alloys are quite different
than many other metals- They work SOFTEN rather than work hardening, they do quench harden and grow in hardness (as well as slightly in size) due to
changes in the metal as it ages.
The self stick weights are very nearly pure Lead, usually a tiny amount of Antimony only in these.
The new Zinc weights will ruin bullet metal by INCREASEING surface tension and preventing details filling out properly in a mould. Large fishing
weights are a good use for these- Also people who shoot muzzle loading cannons may cast balls from these as they are substantially cheaper as scrap
metal than Lead/alloys.
[Edited on 6-12-2014 by Bert]
Rapopart’s Rules for critical commentary:
1. Attempt to re-express your target’s position so clearly, vividly and fairly that your target says: “Thanks, I wish I’d thought of putting it
that way.”
2. List any points of agreement (especially if they are not matters of general or widespread agreement).
3. Mention anything you have learned from your target.
4. Only then are you permitted to say so much as a word of rebuttal or criticism.
Anatol Rapoport was a Russian-born American mathematical psychologist (1911-2007).
|
|
|
Chemosynthesis
International Hazard
Posts: 1071
Registered: 26-9-2013
Member Is Offline
Mood: No Mood
|
|
Good recommendation. I was interested in ordering some lead for casting at some point and had only figured out kitco for spot pricing.
Quote: Originally posted by Bert  | One of my hobbies...
http://castboolits.gunloads.com
The clip on type weights were mostly Lead, a few % Antimony and a VERY small amount of Tin, .5-1.5% and a VERY small amount of Arsenic to speed up
hardening after they were cast. Just enough Tin to lower the alloy's surface tension.
The self stick weights are very nearly pure Lead, usually a tiny amount of Antimony only in these.
The new Zinc weights will ruin bullet metal by INCREASEING surface tension and preventing details filling out properly in a mould. Large fishing
weights are a good use for these- Also people who shoot muzzle loading cannons may cast balls from these as they are substantially cheaper as scrap
metal than Lead/alloys. |
Fascinating and very useful. As I am prone to do, I ordered some bullet molds years
ago, stuck them in a drawer, and never bothered casting anything with them. Now I have two very useful sources of information and inspiration to get
on that.
|
|
|
Bert
Super Administrator
Posts: 2821
Registered: 12-3-2004
Member Is Offline
Mood: " I think we are all going to die. I think that love is an illusion. We are flawed, my darling".
|
|
Shoot me a PM with the mould #'s and intended use- Then go pour yourself a HOT one!
There is Lead free plumbing solder available that's 95% Tin. If you find a building with old "double hung" windows being replaced - It was common for
the draft stops the windows had let into their sides to be made from pure Tin at some time around WWI in the Midwestern USA at least-
[Edited on 6-12-2014 by Bert]
Rapopart’s Rules for critical commentary:
1. Attempt to re-express your target’s position so clearly, vividly and fairly that your target says: “Thanks, I wish I’d thought of putting it
that way.”
2. List any points of agreement (especially if they are not matters of general or widespread agreement).
3. Mention anything you have learned from your target.
4. Only then are you permitted to say so much as a word of rebuttal or criticism.
Anatol Rapoport was a Russian-born American mathematical psychologist (1911-2007).
|
|
|
Metacelsus
International Hazard
Posts: 2539
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline
Mood: Double, double, toil and trouble
|
|
I recently bought an 8 oz. tin ingot off Ebay for use in a reduction (after melting down and granulating). As metals go, it's pretty easy to come by.
|
|
|
jock88
National Hazard
Posts: 505
Registered: 13-12-2012
Member Is Offline
Mood: No Mood
|
|
I have seen the shield (if the wire has a shield which is not too often) in heavy duty electric wire made of tin.
|
|
|
AvBaeyer
National Hazard
Posts: 651
Registered: 25-2-2014
Location: CA
Member Is Offline
Mood: No Mood
|
|
Careysub:
The tin capsules I have accumulated weight between 4 - 5 grams each. You'll have to drink a lot of expensive wine (ca. 100 bottles or 75L) to get a
pound of tin.
By the way, tin is used (as a replacement for lead once used in years gone by) because it is nonreactive toward the chemicals normally found in wine
and so is suitable for wines with a long aging time. An aluminum capsule might corrode over time due to leakage around the cork and have adverse
effects on the wine. I was told this by a winemaker who is also a highly regarded chemist.
Pour yourself a nice, well aged Brunello, and save the capsule for further research.
AvB
|
|
|
CuReUS
National Hazard
Posts: 928
Registered: 9-9-2014
Member Is Offline
Mood: No Mood
|
|
"tin" cans are actually aluminum cans with a thin layer of tin coating inside
so why can't the capsules just have a thin coating of tin on the inside ,rather than making the whole capsule out of tin ? 
|
|
|
Chemosynthesis
International Hazard
Posts: 1071
Registered: 26-9-2013
Member Is Offline
Mood: No Mood
|
|
I'm guessing the thinness and malleability make that very unlikely.
|
|
|
CuReUS
National Hazard
Posts: 928
Registered: 9-9-2014
Member Is Offline
Mood: No Mood
|
|
can't they just dip an aluminum piece in molten tin(like galvanizing) ,and then cut and beat it into the required size and shape ?
|
|
|
Chemosynthesis
International Hazard
Posts: 1071
Registered: 26-9-2013
Member Is Offline
Mood: No Mood
|
|
They would probably get the shape first, but I suppose they could if they thought the logistical expense of adding tin rather than using a thin piece
were enough of a saving to mechanize while still giving them desired tolerances. They are extremely thin, though. I see some where the body and the
face are different materials, but no mention of cladding an aluminum capsule.
[Edited on 7-12-2014 by Chemosynthesis]
|
|
|
careysub
International Hazard
Posts: 1339
Registered: 4-8-2014
Location: Coastal Sage Scrub Biome
Member Is Offline
Mood: Lowest quantum state
|
|
Steel cans coated with tin. All aluminum cans served as replacements for this type of can.
I don't think anyone ever made tin coated aluminum cans. A major part of the attraction of aluminum was the one-step extrusion to make a finished can
body (that, and the smooth polished surface took paint really well, with shiny highlights where desired).
|
|
|
AvBaeyer
National Hazard
Posts: 651
Registered: 25-2-2014
Location: CA
Member Is Offline
Mood: No Mood
|
|
From the website of http://www.corksupply.com/products
"Rivercap™ tin capsules from Cork Supply are crafted as a nine-stage deep drawn shell from a single-piece of pure high-grade tin to ensure an
elegant, flawless finish."
The tin capsules are not platings or laminates.
AvB
|
|
|
cyanureeves
National Hazard
Posts: 744
Registered: 29-8-2010
Location: Mars
Member Is Offline
Mood: No Mood
|
|
i came across an ornamental flower in a pot made in malaysia and it was all tin,about 1.5 lbs.
|
|
|
unionised
International Hazard
Posts: 5126
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
How cold should a wine cellar be?
http://en.wikipedia.org/wiki/Tin_pest
|
|
|
DraconicAcid
International Hazard
Posts: 4334
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
I thought tin pest only happened well below zero, and if you freeze your wine, you've wasted it.
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
|
unionised
International Hazard
Posts: 5126
Registered: 1-11-2003
Location: UK
Member Is Offline
Mood: No Mood
|
|
Why did you think that?
"At 13.2 degrees Celsius (about 56 degrees Fahrenheit) and below, pure tin transforms from the silvery, ductile metallic allotrope of β-form white
tin to brittle, nonmetallic, α-form grey tin with a diamond structure. "
So, freezing isn't an issue. (and the wine probably won't freeze until it's about -5C anyway)
|
|
|
DraconicAcid
International Hazard
Posts: 4334
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
Yes, but it's very slow to initiate unless the temperatures are *very* cold (or it's contaminated by germanium). I used to live in Alberta, where
temperatures regularly got below 13 oC, but people still use tin for roofing their barns (although it's probably well-alloyed to prevent the pest).
You know, I think I'm going to get a piece of tin wire, stick it in a vial, and put it in the freezer for a few weeks.....
[Edited on 8-12-2014 by DraconicAcid]
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
|
jock88
National Hazard
Posts: 505
Registered: 13-12-2012
Member Is Offline
Mood: No Mood
|
|
I stuck some pieces of tin in the freezer for some months and they were still OK when them came out. No sign of the tin pest.
According to some historians one of the major reasons for the defeat of Napoleon in Russia was tin pest. The freezing temperatures caused all the
button to disintegrate off the soldiers clothes and they became useless against the cold.
|
|
|
DraconicAcid
International Hazard
Posts: 4334
Registered: 1-2-2013
Location: The tiniest college campus ever....
Member Is Offline
Mood: Semi-victorious.
|
|
| Quote: Originally posted by jock88 | According to some historians one of the major reasons for the defeat of Napoleon in Russia was tin pest. The freezing temperatures caused all the
button to disintegrate off the soldiers clothes and they became useless against the cold.
|
And according to others, it's more of an urban legend. But "Napoleon's Buttons" is still a damned good read.
Please remember: "Filtrate" is not a verb.
Write up your lab reports the way your instructor wants them, not the way your ex-instructor wants them.
|
|
|
jock88
National Hazard
Posts: 505
Registered: 13-12-2012
Member Is Offline
Mood: No Mood
|
|
One should never let facts get in the way of a good story!!!
|
|
|
| Pages:
1
2 |
![[*]](images/xpblue/default_icon.gif){kind=icon}
