Sciencemadness Discussion Board
Not logged in [Login ]
Go To Bottom

Printable Version  
Author: Subject: vacuum distillation 1 mmhg - 30 mmhg
busybird
Harmless
*




Posts: 4
Registered: 21-9-2014
Member Is Offline

Mood: No Mood

[*] posted on 23-11-2014 at 23:52
vacuum distillation 1 mmhg - 30 mmhg


Can anyone recommend a vacuum pump for vacuum distillation at ranges 1 mm hg to 30 mm hg ? I was told I must have a turbo vac. Any suggestion on the pump I need?
View user's profile View All Posts By User
Magpie
lab constructor
*****




Posts: 5939
Registered: 1-11-2003
Location: USA
Member Is Offline

Mood: Chemistry: the subtle science.

[*] posted on 24-11-2014 at 16:01


I don't know what a turbo pump is. This subject comes up frequently here. I kindly suggest that you use the search engine.



The single most important condition for a successful synthesis is good mixing - Nicodem
View user's profile View All Posts By User
Metacelsus
International Hazard
*****




Posts: 2537
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline

Mood: Double, double, toil and trouble

[*] posted on 24-11-2014 at 18:19


Magpie: https://en.wikipedia.org/wiki/Turbomolecular_pump



As below, so above.

My blog: https://denovo.substack.com
View user's profile View All Posts By User
Magpie
lab constructor
*****




Posts: 5939
Registered: 1-11-2003
Location: USA
Member Is Offline

Mood: Chemistry: the subtle science.

[*] posted on 24-11-2014 at 19:11


Quote: Originally posted by busybird  
I was told I must have a turbo vac. Any suggestion on the pump I need?


You don't have to have a turbo pump to reach P=1-30 mmHg. I reach that pressure range routinely in vacuum distillations when using a Harbor Freight single-stage pump (~$100).




The single most important condition for a successful synthesis is good mixing - Nicodem
View user's profile View All Posts By User
Chemosynthesis
International Hazard
*****




Posts: 1071
Registered: 26-9-2013
Member Is Offline

Mood: No Mood

[*] posted on 24-11-2014 at 20:39


Quote: Originally posted by Magpie  
Quote: Originally posted by busybird  
I was told I must have a turbo vac. Any suggestion on the pump I need?


You don't have to have a turbo pump to reach P=1-30 mmHg. I reach that pressure range routinely in vacuum distillations when using a Harbor Freight single-stage pump (~$100).

You get down to 1mmHg?
View user's profile View All Posts By User
Magpie
lab constructor
*****




Posts: 5939
Registered: 1-11-2003
Location: USA
Member Is Offline

Mood: Chemistry: the subtle science.

[*] posted on 24-11-2014 at 21:41


Yes - here's an example where I was distilling n-caproic acid:

Enlarge, then look at the Bennert manometer in the background. The height of the two mercury columns is very close to being equal. Each gradation is = 1mmHg.
recovery of n-CA by vacuum distillation.JPG - 87kB

[Edited on 25-11-2014 by Magpie]




The single most important condition for a successful synthesis is good mixing - Nicodem
View user's profile View All Posts By User
Chemosynthesis
International Hazard
*****




Posts: 1071
Registered: 26-9-2013
Member Is Offline

Mood: No Mood

[*] posted on 25-11-2014 at 05:24


Wow, thank you for informing me. That is lower than I expected, and giving me ideas on my next shopping excursion.
View user's profile View All Posts By User

  Go To Top