chimhead
Harmless
Posts: 2
Registered: 12-10-2014
Member Is Offline
Mood: No Mood
|
|
Synthesis of Palladium Chloride
Hi there fellow Chemists,
I was just wondering if anyone here could advise on how to go about the Synthesis of Palladium Chloride. How would one go about this Synthesis?
How hard is this Synthesis?
I ask because i know a large market businesses interested in buying bulk Palladium Chloride, they have asked me to buy the product for them, however
every website i have come across seems to be insanely expensive. Sigma Aldrich charge around £75.40 a gram!
Other chemical companies charge around £47.00 a gram, this is insane! because years ago i know i could get a gram of that stuff for
around 4-5 pounds or $12 in the late 90s and early 2000s.
The company has asked me to obtain at least 30 grams, so i was thinking could that be done in one
Synthesis? also is it a job for an advanced chemist?
Thanks
|
|
|
Metacelsus
International Hazard
Posts: 2539
Registered: 26-12-2012
Location: Boston, MA
Member Is Offline
Mood: Double, double, toil and trouble
|
|
Palladium chloride is usually made by dissolving Pd metal in aqua regia. Pd won't react with HCl on its own.
|
|
|
Nicodem
|
Thread Moved
12-10-2014 at 06:33 |
chimhead
Harmless
Posts: 2
Registered: 12-10-2014
Member Is Offline
Mood: No Mood
|
|
Do you know how much Palladium Chloride that would yield?
I herd Get Palladiumoxide and treat with hydrochloric or any other palladium salt treat with hydroxide to precipitate palladium hydroxide and and
after filtering dissolve in hydrochloric.
Still going strait from metal would that yield the same amount as metal?
|
|
|
HgDinis25
Hazard to Others
Posts: 439
Registered: 14-3-2014
Location: Portugal
Member Is Offline
Mood: Who drank my mercury?
|
|
Reacting Aqua Regia with Palladium is the best way to go if you have Palladium metal but I would expect the reaction to be be very slow. You should
add the Aqua Regia in portions intsead of adding all at once because if you do so you'll loose too much of it because of the time the reaction takes
to finish. Heating will speed things up of course.
After reacting it with Aqua Regia I would sugest to precipitate Hydrated Palladium Oxide by adding Sodium Hydroxide. This is to get rid of any Nitrate
contamination. After doing so, filter, wash, wash, wash (you get the point) and react with HCl.
|
|
|
blogfast25
International Hazard
Posts: 10562
Registered: 3-2-2008
Location: Neverland
Member Is Offline
Mood: No Mood
|
|
The palladium chloride referred to is always the anhydrous form. Dissolving palladium hydroxide in conc. HCl and evaporating the HCl only gives you
the dihydrate PdCl<sub>2</sub>.2H<sub>2</sub>O, not the anhydrous form.
Dehydrating palladium dihydrate to good quality anhydrous PdCl<sub>2</sub> is not easy and requires heating the dehydrate in a stream of
anhydrous HCl.
Anhydrous PdCl<sub>2</sub> can also be prepared by reacting hot Pd powder in a stream of chlorine, followed by resubliming of the
anhydrous product.
None these things are 'easy'.
[Edited on 12-10-2014 by blogfast25]
|
|
|
greenlight
National Hazard
Posts: 741
Registered: 3-11-2014
Member Is Offline
Mood: Energetic
|
|
Palladium chloride can be brought online easily in small amounts which sounds better than making it yourself if it is really needed for a synthesis
apart from the high prices, something like $200AUD for 5 grams.
[Edited on 6-11-2014 by greenlight]
|
|
|
gardul
HAZARD TO TEH CATZ!
Posts: 256
Registered: 18-10-2014
Location: Under the Sun in a beaker
Member Is Offline
Mood: Vivified!
|
|
right now if i did the math right. ( i am kinda tired right now) One troy ounce should give you about 31.25g . give or take the purity. this runs
about $800 -#900USD. Palladium chloride from most sites is running about $825 per 25g. Now if you don't have the lab equipment to do this take on
another $100 or so. Not to mention this isn't the easiest thing to do. I would highly recommend just buying it already made.
I just made you read this very pointless signature. How does it feel?
|
|
|
mr.crow
National Hazard
Posts: 884
Registered: 9-9-2009
Location: Canada
Member Is Offline
Mood: 0xFF
|
|
A while ago I dissolved Pd in aqua regia. It was very fun and super easy, dissolves right away in one go.
After boiling down the solution I got a dry brown solid, presumed to be PdCl2. I'm kind of disappointed now to learn its probably the dihydrate.
What is the difference in reactivity between the dihydrate and anhydrous?
Double, double toil and trouble; Fire burn, and caldron bubble
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
