CHRIS25
National Hazard
Posts: 951
Registered: 6-4-2012
Location: Ireland
Member Is Offline
Mood: No Mood
|
|
Insulation affects yield in distillation?
Please could someone answer the following:
I experimented during the water/steam distillation of Orange oil. After a couple of hours I removed the well wrapped foil from around the tall still
head and glass curve, and the neck of the biomass flask. At this point there were tiny miniscule droplets of oil mixed with water running down the
condenser. 15/20 minutes after the foil insulation had been removed there suddenly appeared a mass of much larger globules of oil with absolutely no
visible water pouring down the condenser.
I was surprised, but would I now be right in assuming that the oil vapour carried up in the steam has a higher temperature and as a result any steam
not containing the oil will condense much quicker than the steam that contains the oil and as a result the oil vapour is carried further?
Unfortunately I am unable to measure temperatures in this setup. Thankyou.
(The removal of the foil obviously lowered the temperature of the top right angled glass, since I could now run my fingers across it 3/4 of the way
without being burned.
I still, after so many weeks, have not been able to find expected vapour temperatures that different oils, extracted from organic matter, can reach.
Or maybe I am asking the wrong question here, success in extraction now is being over-shadowed by a realisation that I could increase yields if I
could understand more about the kinetics of all this, many observations have led me to realise that controlling the temperature at which something is
extracted affects yield percentage. But the only way I can control temp at the moment is by adjusting the amount of insulation I use; reducing the
temp of the hotplate simply stops the extraction process).
[Edited on 10-8-2014 by CHRIS25]
‘Calcination… is such a Separation of Bodies by Fire, as makes ‘em easily reducible into Powder; and for that reason ‘tis call’d by some
Chymical Pulverization.’ (John Friend, Chymical Lectures London, 1712)
Right is right, even if everyone is against it, and wrong is wrong, even if everyone is for it. (William Penn 1644-1718)
The very nature of Random, Chance development precludes the existence of Order - strange that our organic and inorganic world is so well defined by
precision and law. (me)
|
|
|
arkoma
Redneck Overlord
Posts: 1763
Registered: 3-2-2014
Location: On a Big Blue Marble hurtling through space
Member Is Offline
Mood: украї́нська
|
|
Chris--I can't provide the data ya want but this setup works well for me:
i DO keep aluminum foil wrapped around the distillation head and a good flow of ice water running through the condenser. I don't want anything
condensing/lingering til it gets to the condenser. Remember too, the mix is gonna never be able to rise above 100C--here in Arizona (altitude I
guess) water boils at about 98-99C.
Edit--I find a steep angle on the condenser helpful
[Edited on 8-10-2014 by arkoma]
"We believe the knowledge and cultural heritage of mankind should be accessible to all people around the world, regardless of their wealth, social
status, nationality, citizenship, etc" z-lib
|
|
|
aga
Forum Drunkard
Posts: 7030
Registered: 25-3-2014
Member Is Offline
|
|
Wow !
Does your laptop get THAT hot ?
|
|
|
arkoma
Redneck Overlord
Posts: 1763
Registered: 3-2-2014
Location: On a Big Blue Marble hurtling through space
Member Is Offline
Mood: украї́нська
|
|
LOL
"We believe the knowledge and cultural heritage of mankind should be accessible to all people around the world, regardless of their wealth, social
status, nationality, citizenship, etc" z-lib
|
|
|
CHRIS25
National Hazard
Posts: 951
Registered: 6-4-2012
Location: Ireland
Member Is Offline
Mood: No Mood
|
|
Yes my thinking originally, Quote: (I don't want anything condensing/lingering til it gets to the condenser"); However it seems from the many
distillations that I have done, that you get more oil when allowing some steam to condense before it reaches the condenser. I have seen how you can
get a ton of water and oil droplets very fine by keeping the whole thing insulated, as opposed to not insulating where one gets very large droplets of
oil and a lot lot less water. this happened also with the rosemary.
‘Calcination… is such a Separation of Bodies by Fire, as makes ‘em easily reducible into Powder; and for that reason ‘tis call’d by some
Chymical Pulverization.’ (John Friend, Chymical Lectures London, 1712)
Right is right, even if everyone is against it, and wrong is wrong, even if everyone is for it. (William Penn 1644-1718)
The very nature of Random, Chance development precludes the existence of Order - strange that our organic and inorganic world is so well defined by
precision and law. (me)
|
|
|
Texium
Administrator
Posts: 4586
Registered: 11-1-2014
Location: Salt Lake City
Member Is Offline
Mood: PhD candidate!
|
|
Ha, that's exactly what I was thinking when I saw that! I was going to comment on it, but I didn't.
|
|
|
arkoma
Redneck Overlord
Posts: 1763
Registered: 3-2-2014
Location: On a Big Blue Marble hurtling through space
Member Is Offline
Mood: украї́нська
|
|
CHRIS25, I'll give it a whirl next time (no insulation)
"We believe the knowledge and cultural heritage of mankind should be accessible to all people around the world, regardless of their wealth, social
status, nationality, citizenship, etc" z-lib
|
|
|
hyfalcon
International Hazard
Posts: 1003
Registered: 29-3-2012
Member Is Offline
Mood: No Mood
|
|
I see the water quality hasn't improved any since I was out there. Deposits in the water jacket of that condenser look considerable.
|
|
|
arkoma
Redneck Overlord
Posts: 1763
Registered: 3-2-2014
Location: On a Big Blue Marble hurtling through space
Member Is Offline
Mood: украї́нська
|
|
ah yeah, its a fecking mess (my condenser's water jacket). The "business" part is clean as a whistle though--Harbor Freight sells a nice nine piece
brush set for $5
"We believe the knowledge and cultural heritage of mankind should be accessible to all people around the world, regardless of their wealth, social
status, nationality, citizenship, etc" z-lib
|
|
|
arkoma
Redneck Overlord
Posts: 1763
Registered: 3-2-2014
Location: On a Big Blue Marble hurtling through space
Member Is Offline
Mood: украї́нська
|
|
I have done two distillations of ground cloves. Preliminary results from equal starting weights and quantities of collected distillate indicate
higher yields from the foil wrapped flask/distillation head. Extracted with ethyl acetate--the "wrapped" extract is colored significantly more. I
have to locate a set of AA batteries for my camera so I can get some pics before I distill off the EtAc.
Edit--found the batteries.
More details-14gm ground cloves, 250ml water in 500ml RBF. Collected 125ml distillate from each run, then extracted with 50ml EtAc. The erlenmeyer
contains the EtAc extract from the foil wrapped rig, the 250ml RBF from the bare disty head.
[Edited on 8-13-2014 by arkoma]
 
"We believe the knowledge and cultural heritage of mankind should be accessible to all people around the world, regardless of their wealth, social
status, nationality, citizenship, etc" z-lib
|
|
|
quantime
Harmless
Posts: 18
Registered: 26-6-2014
Location: divergent
Member Is Offline
Mood: purple
|
|
clove oil
I have distilled clove oil using water. It made two different oil layers. The clove oils are powerful. One drop makes my mouth go numb. It takes a few
minutes before I can feel my tongue again.
Question: After the distillation are you extracting the hydrosol with a solvent? How does that work? I was just dropping the water from the receiving
flask with a sep funnel after the distillation is over. I only get like 1ml or thereabouts of oils this way.
Chris: How about attach a vacuum to your condenser to lower the temperature. Do you get better yield if the temperature is lower?
I think this cheap-o pump might work
http://www.ebay.com/itm/400615363324
[Edited on 13-8-2014 by quantime]
[Edited on 13-8-2014 by quantime]
|
|
|
arkoma
Redneck Overlord
Posts: 1763
Registered: 3-2-2014
Location: On a Big Blue Marble hurtling through space
Member Is Offline
Mood: украї́нська
|
|
I extracted the hydrosol/oil distillate with Ethyl Acetate, then used my sep funnel. The pics are the "intermediate"; havena evaped off the solvent
yet. On my list of things to do today
"We believe the knowledge and cultural heritage of mankind should be accessible to all people around the world, regardless of their wealth, social
status, nationality, citizenship, etc" z-lib
|
|
|
CHRIS25
National Hazard
Posts: 951
Registered: 6-4-2012
Location: Ireland
Member Is Offline
Mood: No Mood
|
|
@quantime - Hi, I have no clue as to how that vacuum works or what you are supposed to do with it. Ignorance here. But as I understand from various
resources, a vacuum distillation highers the temperature not lowers it. Anyway I also found that many of the oils I will be extracting have
degradation temperatures far higher than ever I could produce.
@Arkoma - nice to see your work here, however, despite the fact that when using insulation around the Whole apparatus the yield is 80% within the
first 20 minutes, only insulating a part of the apparatus (Boil flask, still only, Not the connections from the still to the condenser) my yield is a
little more EXCEPT for the fact that it takes a few hours to get that 80%, the difference being is that I get very little hydrosol, with the former
insulation method I can use up quite a lot of water and therefore get a lot of hydrolsol. Also, and this is very subjective since no way could I
analyse this, the quality of the oil from a slow distillation process appears/smells, subtle colour difference against strong natural light - it
appears better quality. Further reading suggests that fast distillation on many organic products does lower the quality a bit. I put the two
distillations side by side in natural light in test tubes, the slower distilled product was a subtly different colour and smelled slightly stronger.
Very subjective I know, but I have no other means to judge things. I suppose it is all about time, the longer it goes the more you get. I did another
orange distil a few days ago and after 8 hours was still getting oil! Yes really. I am doing another one right now, I just took away the insulation
from the connections between the still and the condenser (we are talking 17 inches of tubing here) and I am now getting the same amount of oil flowing
down the condenser but hardly any water. So this is repeatable and does have an effect.
‘Calcination… is such a Separation of Bodies by Fire, as makes ‘em easily reducible into Powder; and for that reason ‘tis call’d by some
Chymical Pulverization.’ (John Friend, Chymical Lectures London, 1712)
Right is right, even if everyone is against it, and wrong is wrong, even if everyone is for it. (William Penn 1644-1718)
The very nature of Random, Chance development precludes the existence of Order - strange that our organic and inorganic world is so well defined by
precision and law. (me)
|
|
|
quantime
Harmless
Posts: 18
Registered: 26-6-2014
Location: divergent
Member Is Offline
Mood: purple
|
|
vacuum
Chris, it is the other way around. The gas law is PV=NRT. Pressure is proportional to temperature. Lower pressure means lower temperature. If you want
to distill with lower temperatures I think the best move it to reduce the pressure.
From doing extractions myself, I came to the conclusion that most of the oil comes over right at the beginning. Generally there is no need to run an
extraction for hours. My most successful setup was to run steam through a biomass flask.
[Edited on 14-8-2014 by quantime]
|
|
|
CHRIS25
National Hazard
Posts: 951
Registered: 6-4-2012
Location: Ireland
Member Is Offline
Mood: No Mood
|
|
Oh, vacuum, ok, told you I was ignorant. Yes that is what I am doing, through a biomass flask but keeping only the biomass flask and the neck of the
flask with water underneath insulated. This to ensure that as little as possible steam condenses back into the flasks. Insulating the rest just
means I get more hydrosol but no increase in oil. So yes, 8 hours is overkill I know. And yes the majority of the oil appears within the first 30
minutes. But then the volume is doubled after many hours. I used to do this with orange peel in water, and 80% of the oil appeared within the first
5 minutes after full temp was reached. But I use the biomass flask now because I can fit 4 times the amount of oranges. I am 6 hours down the road
now and the oil yield has actually doubled from the first hour.
‘Calcination… is such a Separation of Bodies by Fire, as makes ‘em easily reducible into Powder; and for that reason ‘tis call’d by some
Chymical Pulverization.’ (John Friend, Chymical Lectures London, 1712)
Right is right, even if everyone is against it, and wrong is wrong, even if everyone is for it. (William Penn 1644-1718)
The very nature of Random, Chance development precludes the existence of Order - strange that our organic and inorganic world is so well defined by
precision and law. (me)
|
|
|
aga
Forum Drunkard
Posts: 7030
Registered: 25-3-2014
Member Is Offline
|
|
i recently did about 20 distillations.
Tinfoil helps a lot.
Remember that the heat source has to heat up a lot of air cooled glass as well as the stuff you're distilling.
With a 360mm column, a weak heat source can fail to get the glass hot enough to give any distillate at all.
You just get reflux instead
Edit : new project idea - PID rbf heater - SMantle v1 .
[Edited on 15-8-2014 by aga]
|
|
|
arkoma
Redneck Overlord
Posts: 1763
Registered: 3-2-2014
Location: On a Big Blue Marble hurtling through space
Member Is Offline
Mood: украї́нська
|
|
What I think so too, but i'm just a dumb redneck. Oh wait, I have empirical data to back that up.
edit--grammatical errors
[Edited on 8-15-2014 by arkoma]
"We believe the knowledge and cultural heritage of mankind should be accessible to all people around the world, regardless of their wealth, social
status, nationality, citizenship, etc" z-lib
|
|
|
aga
Forum Drunkard
Posts: 7030
Registered: 25-3-2014
Member Is Offline
|
|
Hot damn !
Em-peee-ree-cale.
He gawt Day-tar, an ay ain't meanin' Daytona.
Give it up bro.
Spill doze beanz. C'mon.
Edit: further grammatical errors introduced
[Edited on 15-8-2014 by aga]
|
|
|
![[*]](images/xpblue/default_icon.gif){kind=icon}
